HG II FIXTURE SYSTEM
K090237 · Hiossen, Inc. · DZE · Apr 17, 2009 · Dental
Device Facts
| Record ID | K090237 |
| Device Name | HG II FIXTURE SYSTEM |
| Applicant | Hiossen, Inc. |
| Product Code | DZE · Dental |
| Decision Date | Apr 17, 2009 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 872.3640 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Intended Use
The HG II Fixture System is indicated for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations including; cemented retained, screw retained, or overdenture restorations, and terminal or intermediate abutment support for fixed bridgework. The HG II Fixture System is for single and two stage surgical procedures. It is not for immediate load.
Device Story
HG II Fixture System is a titanium dental implant; surgically placed into upper or lower jaw bone; supports single/multiple-unit restorations (cemented, screw-retained, overdenture) or fixed bridgework. Used by dental surgeons in clinical settings for single or two-stage procedures. Not indicated for immediate loading. Provides structural foundation for prosthetic teeth; improves patient masticatory function and aesthetics.
Clinical Evidence
Bench testing only. No clinical data provided. Safety and performance established through biocompatibility and product validation testing.
Technological Characteristics
Titanium dental implant; endosseous design; intended for surgical placement in jaw bone. Single and two-stage surgical compatibility. No software or electronic components.
Indications for Use
Indicated for partially or fully edentulous adult patients requiring dental implants in the mandible or maxilla for single/multiple-unit restorations or fixed bridgework support. Contraindicated for immediate load.
Regulatory Classification
Identification
An endosseous dental implant is a prescription device made of a material such as titanium or titanium alloy that is intended to be surgically placed in the bone of the upper or lower jaw arches to provide support for prosthetic devices, such as artificial teeth, in order to restore a patient's chewing function.
Special Controls
*Classification.* (1) Class II (special controls). The device is classified as class II if it is a root-form endosseous dental implant. The root-form endosseous dental implant is characterized by four geometrically distinct types: Basket, screw, solid cylinder, and hollow cylinder. The guidance document entitled “Class II Special Controls Guidance Document: Root-Form Endosseous Dental Implants and Endosseous Dental Implant Abutments” will serve as the special control. (See § 872.1(e) for the availability of this guidance document.)(2)
*Classification.* Class II (special controls). The device is classified as class II if it is a blade-form endosseous dental implant. The special controls for this device are:(i) The design characteristics of the device must ensure that the geometry and material composition are consistent with the intended use;
(ii) Mechanical performance (fatigue) testing under simulated physiological conditions to demonstrate maximum load (endurance limit) when the device is subjected to compressive and shear loads;
(iii) Corrosion testing under simulated physiological conditions to demonstrate corrosion potential of each metal or alloy, couple potential for an assembled dissimilar metal implant system, and corrosion rate for an assembled dissimilar metal implant system;
(iv) The device must be demonstrated to be biocompatible;
(v) Sterility testing must demonstrate the sterility of the device;
(vi) Performance testing to evaluate the compatibility of the device in a magnetic resonance (MR) environment;
(vii) Labeling must include a clear description of the technological features, how the device should be used in patients, detailed surgical protocol and restoration procedures, relevant precautions and warnings based on the clinical use of the device, and qualifications and training requirements for device users including technicians and clinicians;
(viii) Patient labeling must contain a description of how the device works, how the device is placed, how the patient needs to care for the implant, possible adverse events and how to report any complications; and
(ix) Documented clinical experience must demonstrate safe and effective use and capture any adverse events observed during clinical use.
Predicate Devices
- HG II Fixture System, Osstem Implant Co., Ltd (K080744)
Related Devices
- K080744 — HG II FIXTURE SYSTEM · Osstem Implant Co., Ltd. · Jul 17, 2008
- K093352 — HG III FIXTURE SYSTEM · Hiossen, Inc. · Nov 24, 2009
- K083633 — HS II SHORT FIXTURE SYSTEM · Osstem Implant Co., Ltd. · May 1, 2009
- K091678 — HG II SHORT FIXTURE SYSTEM · Osstem Implant Co., Ltd. · Feb 18, 2010
- K082213 — GS III FIXTURE SYSTEM · Osstem Implant Co., Ltd. · Oct 14, 2008
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/0 description: The image shows the word "HOSSEN" in a stylized font. The letters are bold and black, with a slightly distressed texture. The "O" in "HOSSEN" is particularly large and round, and there is a curved line above the word, starting from the "H" and extending over the first "S".
85 Ben Fairless Dr. Fairless Hills, PA 19030 Tel : 1-888-678-0001 / Fax : 1-267-759-7004 www.hiossen.com 510(k) Summary
K090237
APR 1 7 2009
This summary of 510(k) safety and effectiveness information is being submitted in accordance with requirements of 21 CFR Part 807.92.
Date : January 23, 2009
1. Company and Correspondent making the submission:
- Submitter's Name :
HiOSSEN Inc.
Mr. MinJoo Kim
- Address :
85 Ben Fairless Dr.
Fairless Hills PA 19030
- Address :
- Contact :
- 2. Device :
Trade or (Proprietary) Name : Common or usual name :
Classification Name :
HG II Fixture System Dental Implant Endosseous Dental Implant 21CFR872.3640 Class II DZE
### 3. Predicate Device :
The HG II Fixture System, Osstem Implant Co., Ltd, K080744
- 4. Description :
The HG II Fixture System is a dental implant made of titanium metal intended to be surgically placed in the bone of the upper or lower jaw arches.
The HG II Fixture System is similar to other commercially available products based on the intended use, the technology used, the claims, the material composition employed and performance characteristics.
The HG II Fixture System is substantially equivalent in design, function and intended use to the HG II Fixture System (K080744) of Osstem Implant Co., Ltd.
### 5. Indication for use :
The HG II Fixture System is indicated for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations including; cemented retained,
{1}------------------------------------------------
Image /page/1/Picture/0 description: The image shows the word "HOSSEN" in a stylized font. The letters are bold and black, with a slightly distressed or textured appearance. The "H" is capitalized, and there is a curved line extending from the top of the "T", adding a unique design element to the word.
Hiossen Inc.
85 Ben Fairless Dr. Fairless Hills, PA 19030 Tel : 1-888-678-0001 / Fax : 1-267-759-7004
www.hiossen.com
screw retained, or overdenture restorations, and terminal or intermediate abutment support for fixed bridgework.
The HG II Fixture System is for single and two stage surgical procedures. It is not for immediate load.
### 6. Review :
The HG II Fixture System has same material and indication for use and similar design and technological characteristics as the predicate device.
The HG II Fixture System has been subjected to safety, performance, and product validations prior to release. Safety tests including biocompatibility have been performed to ensure the devices comply with the applicable International and US regulations.
## 7. Conclusion :
Based on the information provided in this premarket notification HiOSSEN concludes that the HG II Fixture System is safe and effective and substantially equivalent to the predicate device as described herein.
{2}------------------------------------------------
### DEPARTMENT OF HEALTH & HUMAN SERVICES
Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is circular and contains the words "DEPARTMENT OF HEALTH & HUMAN SERVICES . USA" around the perimeter. Inside the circle is an emblem featuring a stylized eagle with its wings spread, clutching what appears to be a caduceus or a similar symbol representing health and medicine.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. Minjoo, Kim Manager Hiossen Incorporated 85 Ben Fairless Drive Fairless Hill, Pennsylvania 19030
APR 1 7 2009
Re: K090237
Trade/Device Name: HG II Fixture System Regulation Number: 872.3640 Regulatory Class: II Product Code: DZE Dated: January 23, 2009 Received: February 2, 2009
Dear Mr. Kim:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
{3}------------------------------------------------
Page 2- Mr. Kim
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Center for Devices and Radiological Health's (CDRH's) Office of Compliance at (240) 276-0100. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please contact the CDRH/Office of Surveillance and Biometrics/Division of Postmarket Surveillance at 240-276-3464. For more information regarding the reporting of adverse events, please go to http://www.fda.gov/cdrh/mdr/.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (240) 276-3150 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.
Sincerely yours,
Sween Rioner
Susan Runner, D.D.S., M.A. Acting Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Image /page/4/Picture/0 description: The image shows the word "HOSSEN" in a bold, sans-serif font. The letters are black and have a slightly rough or textured appearance. There is a curved line above the "O" in "HOSSEN", which appears to be part of the design. The word is horizontally oriented and takes up most of the frame.
Hiossen Inc. 85 Ben Fairless Dr. Fairless Hills, PA 19030 Tel : 1-888-678-0001 / Fax : 1-267-759-7004 www.hiossen.com 510(k) Number K
Device Name: HG II Fixture System
Indication for use : The HG II Fixture System is indicated for use in partially or fully edentulous mandibles and maxillae, in support of single or multiple-unit restorations including ; cemented retained, screw retained, or overdenture restorations, and terminal or intermediate abutment support for fixed bridgework. The HG II Fixture System is for single and two stage surgical procedures. It is not for immediate load.
Prescription Use X (Per 21CFR801 Subpart D) OR
Over-The-Counter Use (Per 21CFR807 Subpart C)
# (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Susan Rapper
(Division Sign-Off) Division of Anesthesiology, General Hospital Infaction Control, Dental Devices
510(k) Number: K090237