LnK Lumbar Interbody Fusion Cage System

K151140 · L&K BIOMED Co., Ltd. · MAX · Aug 18, 2015 · Orthopedic

Device Facts

Record IDK151140
Device NameLnK Lumbar Interbody Fusion Cage System
ApplicantL&K BIOMED Co., Ltd.
Product CodeMAX · Orthopedic
Decision DateAug 18, 2015
DecisionSESE
Submission TypeSpecial
Regulation21 CFR 888.3080
Device ClassClass 2
AttributesTherapeutic

Intended Use

LnK Lumbar Interbody Fusion Cage System is indicated for intervertebral body fusion procedures in skeletally mature patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by patient history and radiographic studies. These DDD patients may also have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s).This device is to be used with autogenous bone graft. LnK Lumbar Interbody Fusion Cage System is to be used with supplemental fixation. Patients should have at least six (6) months of non-operative treatment prior to treatment with an intervertebral cage.

Device Story

Intervertebral body fusion system; provides structural support for spinal fusion. Implants fabricated from PEEK-OPTIMA LT1; include Tantalum markers for radiographic visualization. Machined teeth on implant surfaces engage vertebral endplates. Available in multiple geometries for PLIF, T-PLIF, TLIF, ALIF, and DLIF surgical approaches. Implanted by surgeons in clinical/OR settings; used with autogenous bone graft and supplemental fixation. Provides mechanical stability to interbody space; facilitates fusion; reduces discogenic pain. Supplied sterile or non-sterile.

Clinical Evidence

Bench testing only. Mechanical performance evaluated per ASTM F2077 (static/dynamic axial compression, compression-shear, torsion, expulsion) and ASTM F2267 (subsidence). No clinical data provided.

Technological Characteristics

Materials: PEEK-OPTIMA LT1 (ASTM F2026) and Tantalum (ASTM F560). Form factor: Interbody cages with machined teeth for endplate engagement. Approaches: PLIF, T-PLIF, TLIF, ALIF, DLIF. Sterilization: Sterile or non-sterile.

Indications for Use

Indicated for skeletally mature patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1, including those with up to Grade 1 spondylolisthesis or retrolisthesis. Requires 6 months of prior non-operative treatment.

Regulatory Classification

Identification

An intervertebral body fusion device is an implanted single or multiple component spinal device made from a variety of materials, including titanium and polymers. The device is inserted into the intervertebral body space of the cervical or lumbosacral spine, and is intended for intervertebral body fusion.

Special Controls

*Classification.* (1) Class II (special controls) for intervertebral body fusion devices that contain bone grafting material. The special control is the FDA guidance document entitled “Class II Special Controls Guidance Document: Intervertebral Body Fusion Device.” See § 888.1(e) for the availability of this guidance document.(2) Class III (premarket approval) for intervertebral body fusion devices that include any therapeutic biologic (e.g., bone morphogenic protein). Intervertebral body fusion devices that contain any therapeutic biologic require premarket approval. (c) *Date premarket approval application (PMA) or notice of product development protocol (PDP) is required.* Devices described in paragraph (b)(2) of this section shall have an approved PMA or a declared completed PDP in effect before being placed in commercial distribution.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002 August 18, 2015 L&K BIOMED Co., Ltd Ms. Yerim An RA Specialist #201, 202 16-25, Dongaekjungang-ro 16 beon-gil Giheung-gu, Yongin-si Gyeonggi-do, 446-916 Republic of Korea Re: K151140 Trade/Device Name: LnK Lumbar Interbody Fusion Cage System Regulation Number: 21 CFR 888.3080 Regulation Name: Intervertebral body fusion device Regulatory Class: Class II Product Code: MAX Dated: July 17, 2015 Received: July 20, 2015 Dear Ms. An: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical {1}------------------------------------------------ Page 2 - Ms. Yerim An device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Sincerely yours, # Mark N. Melkerson -S Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ ## Indications for Use Statement 510(k) Number (if known): K151140 Device Name: LnK Lumbar Interbody Fusion Cage System ### Indications For Use: LnK Lumbar Interbody Fusion Cage System is indicated for intervertebral body fusion procedures in skeletally mature patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by patient history and radiographic studies. These DDD patients may also have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s).This device is to be used with autogenous bone graft. LnK Lumbar Interbody Fusion Cage System is to be used with supplemental fixation. Patients should have at least six (6) months of non-operative treatment prior to treatment with an intervertebral cage. Prescription Use (Part 21 CER801 Subpart D) AND/OR Over-The-Counter Use (21 CER801 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED) Concurrence of CDRH, Office of Device Evaluation (OED) {3}------------------------------------------------ # 510(k) SUMMARY The following 510(k) summary is being submitted as required by 21 CFR 807.92(a): | 1. | Submitter: | Gook Jin Kang<br>L&K BIOMED Co., Ltd.<br>#201, 202 16-25, Dongbaekjungang-ro 16 beon-gil<br>Giheung-gu, Yongin-si, Gyeonggi-do, 446-916,<br>Korea<br>Phone. 82-2-6717-1985<br>FAX .82-2-6717-1989 | |----|-----------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | Contact Person: | Yerim An | | | Date prepared: | Aug. 13, 2015 | #### 2. Device Identification | Trade Name | LnK Lumbar Interbody Fusion Cage System | |---------------------|----------------------------------------------| | Common Name | Intervertebral Body Fusion Device | | Product Code | MAX | | Classification Name | Intervertebral body fusion device (888.3080) | #### 3. Predicate or legally marketed devices which are substantially equivalent The design feature and indications for use for the subject LnK Lumbar Interbody Fusion Cage System is substantially equivalent to the following predicates: - . Primary Predicate: LnK Lumbar Interbody Fusion Cage System L&K BIOMED Co., Ltd (K121096) - . Additional Predicate: LnK Lumbar Interbody Fusion Cage System_ L&K BIOMED Co., Ltd (K110783) #### Description of the Device 4. The LnK Lumbar Interbody Fusion Cage System is intervertebral body fixation devices intended for use as an aid in spinal fixation. This system is fabricated and manufactured from PEEK-OPTIMA® LT1 as described by ASTM F2026. The Tantalum marker used for this product is made to the voluntary standard of ASTM F560. The devices are available in a variety of different sizes and heights to match more closely the patient's anatomy. The ends of the implants have machined teeth which are designed to engage with the vertebral body end plates. LnK Lumbar Interbody Fusion Cage System Implants {4}------------------------------------------------ are supplied as sterile or non-sterile. The LnK PLIF PEEK Cages are to be implanted via posterior approach. These devices are placed two implants on each side of the interbody space (right and left). The LnK T-PLIF PEEK Cages which is used in transforaminal posterior lumbar interbody fusion technique. However, this kind of cage is to be implanted only one implant on interbody space. The LnK TLIF PEEK Cages are a "banana" shaped. Implants are dedicated to transforaminal approach. TLIF technique involves placing only one bone graft spacer in the middle of the interbody space, without retraction of the spinal nerves. The LnK ALIF PEEK Cages are to be implanted via anterior approach. The LnK DLIF PEEK Cages are to be implanted via direct lateral interbody fusion approach. LnK DLIF PEEK Cage can be used in an open approach and a percutaneous approach with MIS instrumentation. #### 5. Indication for use LnK Lumbar Interbody Fusion Cage System is indicated for intervertebral body fusion procedures in skeletally mature patients with degenerative disc disease (DDD) at one or two contiguous levels from L2-S1. DDD is defined as discogenic back pain with degeneration of the disc confirmed by patient history and radiographic studies. These DDD patients may also have up to Grade 1 spondylolisthesis or retrolisthesis at the involved level(s).This device is to be used with autogenous bone graft. LnK Lumbar Interbody Fusion Cage System is to be used with supplemental fixation. Patients should have at least six (6) months of non-operative treatment prior to treatment with an intervertebral cage. {5}------------------------------------------------ | No | Item | LnK Lumbar Interbody Fusion | LnK Lumbar Interbody Fusion | |----|---------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | Cage System | Cage System (Predicate) | | 1 | Manufacturer | L&K BIOMED Co., Ltd. | L&K BIOMED Co., Ltd. | | 2 | Material | PEEK and Tantalum | PEEK and Tantalum | | 3 | 510(K) Number | | K121096 | | 4 | Product Code | MAX | MAX | | 5 | Class | ClassII | ClassII | | 6 | Intended Use | LnK Lumbar Interbody<br>Fusion Cage System is<br>indicated for intervertebral<br>body fusion procedures in<br>skeletally mature patients with<br>degenerative disc disease<br>(DDD) at one or two<br>contiguous levels from L2-S1.<br>DDD is defined as discogenic<br>back pain with degeneration<br>of the disc confirmed by<br>patient history and<br>radiographic studies. These<br>DDD patients may also have<br>up to Grade 1<br>spondylolisthesis or<br>retrolisthesis at the involved<br>level(s).This device is to be<br>used with autogenous bone<br>graft. LnK Lumbar Interbody<br>Fusion Cage System is to be<br>used with supplemental<br>fixation. Patients should have<br>at least six (6) months of non-<br>operative treatment prior to<br>treatment with an<br>intervertebral cage | LnK Lumbar Interbody<br>Fusion Cage System is<br>indicated for intervertebral<br>body fusion procedures in<br>skeletally mature patients with<br>degenerative disc disease<br>(DDD) at one or two<br>contiguous levels from L2-S1.<br>DDD is defined as discogenic<br>back pain with degeneration<br>of the disc confirmed by<br>patient history and<br>radiographic studies. These<br>DDD patients may also have<br>up to Grade 1<br>spondylolisthesis or<br>retrolisthesis at the involved<br>level(s).This device is to be<br>used with autogenous bone<br>graft. LnK Lumbar Interbody<br>Fusion Cage System is to be<br>used with supplemental<br>fixation. Patients should have<br>at least six (6) months of non-<br>operative treatment prior to<br>treatment with an<br>intervertebral cage | ### Comparison of the technology characteristics of the device to predicate and 6. legally marketed devices #### 7. Performance Data Mechanical performance of additional components is same with predicated (K121096). Additional sizes are not worst case. Therefore, We substitute mechanical test data of additional components of LnK Lumbar Interbody Fusion Cage System with it of LnK Lumbar Interbody Fusion Cage System(K121096). {6}------------------------------------------------ The LnK Lumbar Interbody Fusion Cage System was tested according to the ASTM F 2077, specifically, Static and Dynamic Axial Compression, Static and Dynamic Compression-Shear Testing, Static and Dynamic Torsion Testing, Expulsion Testing and Static Subsidence testing under Axial Compression, per ASTM F 2267. #### Conclusion 8. The additional components of LnK Lumbar Interbody Fusion Cage System are substantially equivalent to the device.
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from the tree

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...