Last synced on 18 April 2025 at 11:05 pm

Resorbable Spinal Intervertebral Body Fixation Orthosis - Mesh

Page Type
Product Code
Definition
Maintain position of bone graft in spinal fusion procedures. Intended for use in spinal fusion procedures as a means to maintain the relative position of weak bony tissue such as allografts or autografts, in conjunction with traditional rigid fixation.
Physical State
Meshes and screws made from resorbable materials such polylactic acid
Technical Method
Attaches to anterior column of spine using screws
Target Area
Anterior column of lumbar or cervical spine
Regulation Medical Specialty
Orthopedic
Review Panel
Orthopedic
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
888.3060
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 888.3060 Spinal intervertebral body fixation orthosis

§ 888.3060 Spinal intervertebral body fixation orthosis.

(a) Identification. A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct “sway back,” scoliosis (lateral curvature of the spine), or other conditions.

(b) Classification. Class II.

Resorbable Spinal Intervertebral Body Fixation Orthosis - Mesh

Page Type
Product Code
Definition
Maintain position of bone graft in spinal fusion procedures. Intended for use in spinal fusion procedures as a means to maintain the relative position of weak bony tissue such as allografts or autografts, in conjunction with traditional rigid fixation.
Physical State
Meshes and screws made from resorbable materials such polylactic acid
Technical Method
Attaches to anterior column of spine using screws
Target Area
Anterior column of lumbar or cervical spine
Regulation Medical Specialty
Orthopedic
Review Panel
Orthopedic
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
888.3060
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 888.3060 Spinal intervertebral body fixation orthosis

§ 888.3060 Spinal intervertebral body fixation orthosis.

(a) Identification. A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct “sway back,” scoliosis (lateral curvature of the spine), or other conditions.

(b) Classification. Class II.