Last synced on 18 April 2025 at 11:05 pm

Anterior Staple As Supplemental Fixation For Fusion

Page Type
Product Code
Definition
Anterior cervical device for supplemental fixation to support a fusion.
Physical State
This is a metalic staple that is implanted into two adjacent vertebral bodies.
Technical Method
The staple provides physical support while a fusion develops between vertebral bodies.
Target Area
This is intended for the anterior, cervical spinal column in skeletally mature patients.
Regulation Medical Specialty
Orthopedic
Review Panel
Orthopedic
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
888.3060
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 888.3060 Spinal intervertebral body fixation orthosis

§ 888.3060 Spinal intervertebral body fixation orthosis.

(a) Identification. A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct “sway back,” scoliosis (lateral curvature of the spine), or other conditions.

(b) Classification. Class II.

Anterior Staple As Supplemental Fixation For Fusion

Page Type
Product Code
Definition
Anterior cervical device for supplemental fixation to support a fusion.
Physical State
This is a metalic staple that is implanted into two adjacent vertebral bodies.
Technical Method
The staple provides physical support while a fusion develops between vertebral bodies.
Target Area
This is intended for the anterior, cervical spinal column in skeletally mature patients.
Regulation Medical Specialty
Orthopedic
Review Panel
Orthopedic
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
888.3060
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 888.3060 Spinal intervertebral body fixation orthosis

§ 888.3060 Spinal intervertebral body fixation orthosis.

(a) Identification. A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct “sway back,” scoliosis (lateral curvature of the spine), or other conditions.

(b) Classification. Class II.