Last synced on 18 April 2025 at 11:05 pm

Syringe, Balloon Inflation, Exempt

Page Type
Product Code
Definition
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Physical State
Exemption is limited to non-patient contacting balloon inflation syringes intended only to inflate/deflate balloon catheters and monitor pressure within the balloon.
Technical Method
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Target Area
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Regulation Medical Specialty
Cardiovascular
Review Panel
Cardiovascular
Submission Type
510(K) Exempt
Device Classification
Class 2
Regulation Number
870.1650
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 870.1650 Angiographic injector and syringe

§ 870.1650 Angiographic injector and syringe.

(a) Identification. An angiographic injector and syringe is a device that consists of a syringe and a high-pressure injector which are used to inject contrast material into the heart, great vessels, and coronary arteries to study the heart and vessels by x-ray photography.

(b) Classification. Class II (special controls). The device, when it is a non-patient contacting balloon inflation syringe intended only to inflate/deflate balloon catheters and monitor pressure within the balloon, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 870.9.

[45 FR 7907, Feb. 5, 1980, as amended at 84 FR 71811, Dec. 30, 2019]

Syringe, Balloon Inflation, Exempt

Page Type
Product Code
Definition
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Physical State
Exemption is limited to non-patient contacting balloon inflation syringes intended only to inflate/deflate balloon catheters and monitor pressure within the balloon.
Technical Method
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Target Area
This product code is the class II exempt counterpart of MAV, and was exempted, subject to the limitations of exemption, under the procedures established by the 21st Century Cures Act. This device type does not require premarket notification (510(k)) to market if it does not exceed the general limitations of exemption found in 21 CFR 870.9 and the specific limitations of exemption as stated in the “Physical State” field of this product code description.
Regulation Medical Specialty
Cardiovascular
Review Panel
Cardiovascular
Submission Type
510(K) Exempt
Device Classification
Class 2
Regulation Number
870.1650
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 870.1650 Angiographic injector and syringe

§ 870.1650 Angiographic injector and syringe.

(a) Identification. An angiographic injector and syringe is a device that consists of a syringe and a high-pressure injector which are used to inject contrast material into the heart, great vessels, and coronary arteries to study the heart and vessels by x-ray photography.

(b) Classification. Class II (special controls). The device, when it is a non-patient contacting balloon inflation syringe intended only to inflate/deflate balloon catheters and monitor pressure within the balloon, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 870.9.

[45 FR 7907, Feb. 5, 1980, as amended at 84 FR 71811, Dec. 30, 2019]