Last synced on 17 January 2025 at 11:05 pm

Infusion Safety Management Software

Page Type
Product Code
Definition
Infusion safety management software is a prescription device intended for use with infusion pumps and may include one or more of the following capabilities: prepopulation of infusion programming parameters, data retrieval and analysis for tracking and trending, drug infusion error reduction algorithms, and alarm transmission.
Physical State
The device is a software application(s), which may be implemented as part of an infusion pump and may also be implemented onto a hospital information system for use with an infusion pump system.
Technical Method
Infusion safety management software may include one or more software applications that enforce safety control mechanisms through wireless or wired communication between the hospital information system, the infusion pump, and the healthcare provider.
Target Area
Target area is according to the approved drug or biologic product labeling.
Regulation Medical Specialty
General Hospital
Review Panel
General Hospital
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
880.5725
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 880.5725 Infusion pump

§ 880.5725 Infusion pump.

(a) Identification. An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.

(b) Classification. Class II (performance standards).

Infusion Safety Management Software

Page Type
Product Code
Definition
Infusion safety management software is a prescription device intended for use with infusion pumps and may include one or more of the following capabilities: prepopulation of infusion programming parameters, data retrieval and analysis for tracking and trending, drug infusion error reduction algorithms, and alarm transmission.
Physical State
The device is a software application(s), which may be implemented as part of an infusion pump and may also be implemented onto a hospital information system for use with an infusion pump system.
Technical Method
Infusion safety management software may include one or more software applications that enforce safety control mechanisms through wireless or wired communication between the hospital information system, the infusion pump, and the healthcare provider.
Target Area
Target area is according to the approved drug or biologic product labeling.
Regulation Medical Specialty
General Hospital
Review Panel
General Hospital
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
880.5725
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 880.5725 Infusion pump

§ 880.5725 Infusion pump.

(a) Identification. An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm.

(b) Classification. Class II (performance standards).