Last synced on 17 January 2025 at 11:05 pm

Administration Set Docking Station

Page Type
Product Code
Definition
Temporary closing IV administration set. Temporary aseptic closure of the male Luer connector of the IV tubing in between uses for the life of the administration set.
Physical State
Housing is made of polyethylene, piston is made of silicone
Technical Method
Temporary barrier against airborne contaminants
Target Area
indirect contact, intravascular administration of fluids
Regulation Medical Specialty
General Hospital
Review Panel
General Hospital
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
880.5440
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 880.5440 Intravascular administration set

§ 880.5440 Intravascular administration set.

(a) Identification. An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container.

(b) Classification. Class II (special controls). The special control for pharmacy compounding systems within this classification is the FDA guidance document entitled “Class II Special Controls Guidance Document: Pharmacy Compounding Systems; Final Guidance for Industry and FDA Reviewers.” Pharmacy compounding systems classified within the intravascular administration set are exempt from the premarket notification procedures in subpart E of this part and subject to the limitations in § 880.9.

[45 FR 69682, Oct. 21, 1980, as amended at 66 FR 15798, Mar. 21, 2001]

Administration Set Docking Station

Page Type
Product Code
Definition
Temporary closing IV administration set. Temporary aseptic closure of the male Luer connector of the IV tubing in between uses for the life of the administration set.
Physical State
Housing is made of polyethylene, piston is made of silicone
Technical Method
Temporary barrier against airborne contaminants
Target Area
indirect contact, intravascular administration of fluids
Regulation Medical Specialty
General Hospital
Review Panel
General Hospital
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
880.5440
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 880.5440 Intravascular administration set

§ 880.5440 Intravascular administration set.

(a) Identification. An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container.

(b) Classification. Class II (special controls). The special control for pharmacy compounding systems within this classification is the FDA guidance document entitled “Class II Special Controls Guidance Document: Pharmacy Compounding Systems; Final Guidance for Industry and FDA Reviewers.” Pharmacy compounding systems classified within the intravascular administration set are exempt from the premarket notification procedures in subpart E of this part and subject to the limitations in § 880.9.

[45 FR 69682, Oct. 21, 1980, as amended at 66 FR 15798, Mar. 21, 2001]