SYNTHES PROXIMAL HUMERAL NAIL
Device Facts
| Record ID | K002729 |
|---|---|
| Device Name | SYNTHES PROXIMAL HUMERAL NAIL |
| Applicant | Synthes (Usa) |
| Product Code | JDS · Orthopedic |
| Decision Date | Oct 6, 2000 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 888.3030 |
| Device Class | Class 2 |
| Attributes | Therapeutic |
Indications for Use
The Synthes Proximal Humeral Nail is intended for use in fractures of the proximal humerus.
Device Story
The Synthes Proximal Humeral Nail is an intramedullary rod designed for fixation of proximal humeral fractures. The device features a distal taper and is 150 mm in length, with proximal and distal holes to accommodate locking screws. It is intended for surgical use by physicians to stabilize fractures, facilitating bone healing. The device is constructed from Ti-6Al-7Nb alloy.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Material: Ti-6Al-7Nb. Design: Intramedullary rod with distal taper, 150 mm length, proximal and distal locking screw holes. Energy source: None (mechanical). Connectivity: None.
Indications for Use
Indicated for patients with fractures of the proximal humerus.
Regulatory Classification
Identification
Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.
Predicate Devices
- Synthes (USA) Unreamed Humeral Nail
- Acumed Polarus Proximal Humeral Fixation Rod
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/0 description: The image shows the word "SYNTHES" in bold, black letters. To the left of the word is a circular logo with a stylized figure inside. A registered trademark symbol is located to the right of the word.
OCT = 6 2000
## 3.0 Summary of Safety and Effectiveness Information
SPONSOR:
Synthes (USA) 1690 Russell Road Paoli, PA 19301 (610) 647-9700 Contact: Thomas M. Maguire
Synthes Proximal Humeral Nail DEVICE NAME:
Class II, Section 888.3020 - Intramedullary fixation rod. CLASSIFICATION:
Synthes (USA) Unreamed Humeral Nail; Acumed Polarus Proximal PREDICATE DEVICE: Humeral Fixation Rod
The Synthes Proximal Humeral Nail is an intramedullary rod that features a DEVICE DESCRIPTION: distal taper design. It is 150 mm in length and has holes in both the proximal and distal sections that accept locking screws.
INTENDED USE:
The Synthes Proximal Humeral Nail is intended for use in fractures of the proximal humerus.
MATERIAL:
Ti-6Al-7Nb
{1}------------------------------------------------
Image /page/1/Picture/1 description: The image is a seal for the Department of Health & Human Services - USA. The seal is circular and contains the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. In the center of the seal is an abstract image of an eagle.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
## OCT = 6 2000
Mr. Thomas M. Maguire Project Leader, Regulatory Affairs Synthes (USA) P.O. Box 1766 1690 Russell Road Paoli, Pennsylvania 19301
Re: K002729
Trade Name: Synthes Proximal Humeral Nail Regulatory Class: II Product Code: JDS Dated: August 31, 2000 Received: September 1, 2000
Dear Mr. Maguire:
We have reviewed your Section 510(k) notification of intent to market the device referenced we have reviewed your Section 910(x) from the materially equivalent (for the indisations for use, 1076, the stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the stated in the encreasure) to device Amendments, or to devices that have been reclassified in may enactifield date of the Medical Dorted Frances of the Rederal Food, Drug, and Cosmetic Act (Act). You may, accordance with the device, subject to the general control provisions of the Act. "The general therefore, market the device, subject to annual registration, listing of devices, control provisions of the rice increase requence misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III IT your device is classified (see asono) and additional controls. Existing major regulations (Fremarket Apploval), it may of success of Federal Regulations, Title 21, Parts 800 to 895. allecting your ac rive sant determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Manufacturing Places: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to inspections, the Food and Drug result in regulatory action. In addition, FDA may publish comply with the GMT regaraters in your device in the Federal Register. Please note: this response to your premarks betification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket I his letter will and w you would of substantial equivalence of your device to a legally marketed nothleate device results in a classification for your device and thus, permits your device to proceed to the market.
{2}------------------------------------------------
## Page 2 – Mr. Thomas M. Maguire
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4659. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Mark N. Milburn
Celia M. Witten, Ph.D., M.D. Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{3}------------------------------------------------
Image /page/3/Picture/0 description: The image shows the word "SYNTHES" in bold, black letters. To the left of the word is a logo that appears to be a stylized representation of a person. There is a small circle with an R in it to the right of the word, likely indicating a registered trademark.
Indications for Use Statement 2.0
> Page of
510(k) Number (if known):
Synthes (USA) Proximal Humeral Nail Device Name: _________________________________________________________________________________________________________________________________________________________________
Indications/Contraindications: The Synthes Proximal Humeral Nail is indicated for use in fractures of the proximal humerus.
(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign-Off) Division of General Restorative Devices 510(k) Number _
Prescription Use (Per 21 CFR 801.109) OR
Over-The-Counter Use_
Synthes (USA) Proximal Humeral Nail 510(k)
Image /page/3/Picture/14 description: The image shows the words "Page Number" in a bold, sans-serif font, followed by the number "00004" in a similar font. The words "Page Number" are positioned above the number, indicating that the image is likely a page number from a document. The number "00004" suggests that this is page four of a larger document.
