POWDERFREE LATEX EXAMINATION GLOVES (POLYMER COATED) (PROTEIN LABEL OF 50 MCROGRAM OR LESS)
K993500 · Besglove Medicare Sdn. Bhd. · LYY · Dec 2, 1999 · General Hospital
Device Facts
Record ID
K993500
Device Name
POWDERFREE LATEX EXAMINATION GLOVES (POLYMER COATED) (PROTEIN LABEL OF 50 MCROGRAM OR LESS)
Applicant
Besglove Medicare Sdn. Bhd.
Product Code
LYY · General Hospital
Decision Date
Dec 2, 1999
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 880.6250
Device Class
Class 1
Indications for Use
A patient Examination Glove is a disposable device intended for medical purpose that is worn on the examiner's hand or finger to pervent contamination between patient and examiner.
Device Story
Disposable powder-free latex examination glove; polymer coated; features protein label claim of 50 micrograms or less. Used by healthcare professionals in clinical settings to provide a protective barrier between examiner and patient; prevents cross-contamination. Device is worn on hands/fingers during examinations.
Indicated for use as a disposable medical glove worn on the examiner's hand or finger to prevent cross-contamination between patient and examiner.
Regulatory Classification
Identification
A non-powdered patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. A non-powdered patient examination glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing.
Related Devices
K093375 — KS-CARE POWDER FREE POLYMER COATED LATEX EXAMINATION GLOVE WITH PROTEIN CONTENT LABELING CLAIM (50UG OR LESS) · Koon Seng Sdn Bhd · Dec 2, 2009
K013333 — LATEX EXAMINATION GLOVES POWDERFREE POLYMER COATED WITH PROTEIN CONCENT LABEL CLAIM · Innovative Gloves Co;, Ltd. · Dec 7, 2001
K040408 — POLYMER COATED, POWDER-FREE LATEX EXAMINATION GLOVES WITH PROTEIN LABELING (LESS THAN 50 UG/G PER GLOVE) · Shun Thai Rubber Gloves Industry Public Co., Ltd. · Mar 17, 2004
K994354 — POLYMER COATED, POWDER FREE, LATEX EXAMINATION GLOVES WITH PROTEIN CONTENT LABELING CLAIM (50 MICROGRAMS OR LESS) · Flexitech Sdn. Bhd. · Jan 31, 2000
K993454 — POWDERFREE LATEX EXAMINATION GLOVES (POLYMER COATED) (PROTEIN LABEL CLAIM - 50 MICROGRAMS OR LESS) · Sri Johani Sdn. Bhd. · Dec 3, 1999
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo features a stylized abstract symbol resembling a person with outstretched arms, with three curved lines forming the body and arms. The symbol is positioned to the right of the text, which reads "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" in a circular arrangement around the symbol.
Public Health Service
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
DEC - 2 1999
Mr. Lee Aik Lim Managing Director Besglove Medicare Sdn. Bhd. Lot 6, Jalan P/2A Bangi Industrial Estate 43650 Bandar Baru Banqi Selangor Darul Ehsan, Malaysia
Re : K993500 Trade Name: Powderfree Latex Examination Gloves (Polymer Coated) (Protein Label Claim of 50 micrograms or less) Regulatory Class: I Product Code: LYY October 11, 1999 Dated: Received: October 15, 1999
Dear Mr. Lim:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). T You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will Failure to comply with the GMP verify such assumptions. regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in
{1}------------------------------------------------
Page 2 - Mr. Lim
the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to
premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Patino Cuerdi //oc
Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radioloqical Health
Enclosure
{2}------------------------------------------------
Attachment 9
K 99 35 ∅∅
510 (K) number (if known) : _
Device Name : Powderfree Latex Examination Gloves (Polymer Coated) (Protein Label Claim) 50 MICROGRAMS OR LESS
Indications For Use :
A patient Examination Glove is a disposable device intended for medical purpose that is worn on the examiner's hand or finger to pervent contamination between patient and examiner.
## (PLEASE DO NOT WRITE BELOW THIS LINE. CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Clim S. Lim
(Division Sign Off) Division of Dental, Infection Control, and General Hospital Dev 510(K) Number
Prescription Use _____________________________________________________________________________________________________________________________________________________________
Over-The-Counter Use ાર
Panel 1
/
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.