K973072 · Wako Chemicals USA, Inc. · JJX · Sep 12, 1997 · Clinical Chemistry
Device Facts
Record ID
K973072
Device Name
WAKO NEFA LINEARITY SET
Applicant
Wako Chemicals USA, Inc.
Product Code
JJX · Clinical Chemistry
Decision Date
Sep 12, 1997
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 862.1660
Device Class
Class 1
Indications for Use
The Wako NEFA Linearity set is to be used with the wako NEFAC fest kit for the estimation of the linearity limits of the reagent/instrument system for the NEFA analyte.
Device Story
Wako NEFA Linearity set functions as a calibration verification or linearity assessment tool for the Wako NEFA test kit. It is used in clinical laboratory settings by laboratory technicians to determine the upper and lower limits of the analytical measurement range for NEFA (Non-Esterified Fatty Acids) testing. By processing the linearity set through the reagent/instrument system, the user verifies that the system provides accurate, linear results across the intended clinical range. This ensures the reliability of patient test results, allowing clinicians to make informed decisions regarding lipid metabolism and related metabolic conditions.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
In vitro diagnostic linearity set for NEFA analyte. Designed for use with Wako NEFA test kit. Class I device (Product Code: JJX).
Indications for Use
Indicated for use with the Wako NEFA test kit to estimate the linearity limits of the reagent/instrument system for the NEFA analyte.
Regulatory Classification
Identification
A quality control material (assayed and unassayed) for clinical chemistry is a device intended for medical purposes for use in a test system to estimate test precision and to detect systematic analytical deviations that may arise from reagent or analytical instrument variation. A quality control material (assayed and unassayed) may be used for proficiency testing in interlaboratory surveys. This generic type of device includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds), single (specified) analytes, or urinalysis controls.
Related Devices
K030065 — WAKO NEFA LINEARITY SET · Wako Chemicals USA, Inc. · Feb 11, 2003
K042550 — MULTI-LIPID CALIBRATOR · Wako Chemicals USA, Inc. · Nov 8, 2004
K040918 — WAKO LIPID CONTROL, LEVEL 1 AND LEVEL 2 · Wako Chemicals USA, Inc. · May 17, 2004
K033860 — AUTOKIT TOTAL KETONE BODIES KIT (SERUM) AND WAKO KETONE BODY CALIBRATOR · Wako Chemicals USA, Inc. · Apr 23, 2004
K070223 — AUDIT MICROCV LIPIDS LINEARITY SET (LOW) · Aalto Scientific, Ltd. · Mar 13, 2007
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image contains the words "Public Health Service". The text is written in a simple, sans-serif font. The words are stacked on top of each other, with "Public Health" on the top line and "Service" on the bottom line.
Image /page/0/Picture/2 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" arranged around the perimeter. Inside the circle is a stylized symbol featuring three abstract human profiles facing to the right, stacked on top of each other.
Food and Drug Administration 2098 Gaither Road Rockville MD 20850
SEP | 2 1997
Tonya Mallory . Manager Wako Chemicals USA, Inc. 1600 Bellwood Road Richmond, Virginia 23237
K973072 Re : Wako NEFA Linearity Set Regulatory Class: I Product Code: JJX Dated: August 11, 1997 Received: August 18, 1997
Dear Ms. Mallory:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ਰ substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Reqister. Please note:
this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
{1}------------------------------------------------
Paqe 2
Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at (770) 488-7655.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to Other qeneral information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Steven Sitman
Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices
Office of Device Evaluation II your device is classitied (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory In addition, FDA may publish further announcements action. concerning your device in the Federal Register. Please note:
this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or requlations.
{2}------------------------------------------------
CHEMICALS USA TEL:804-271-7697
Vrm
wuuz
Page **_ of _**
1973072 510(k) Number (if known):_ inearity wako Device Name:
Indications For Use:
The Wako NEFA Lineari
linearity set is to be used with
the wako NEFAC fest kit for the estimation of the
linearity limits of the reagent/instrument system
for the NEFA analyte.
| Post-It Fax Note | 7671 | Date 8/22/97 | # of pages 1 |
|--------------------|----------------------|--------------|--------------|
| To Damia Jackson | From Tonya Mallory | | |
| Co./Dept. FDA/ODE | Co. Wako Diagnostics | | |
| Phone # | Phone # 804 271 7677 | | |
| Fax # 301-594-5941 | Fax # 804 271-7791 | | |
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF SEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign-Off)
Division of Clinical Laboratory Devices
510(k) Number 6913072
Prescription Use
(Per 21 CFR 801.109)
OR
Over-The-Counter Use
(Optional Format 1-2-96)
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.