Last synced on 25 April 2025 at 11:05 pm

Pump, Infusion, Insulin, To Be Used With Invasive Glucose Sensor

Page Type
Product Code
Definition
The insulin pump is intended to be used as a component of an invasive glucose device. The pump is designed to pump fluid (insulin) into a patient in a controlled manner as an aid in the mangement of diabetes mellitus in persons requiring insulin. It is intended to accept and display data from the glucose sensor.
Physical State
Must include product code MDS, sensor, invasive test system, or product code PQF, sensor, glucose, invasive, non-adjunctive.
Technical Method
The pump is designed to pump fluid (insulin) into a patient in a controlled manner as an aid in the mangement of diabetes mellitus in persons requiring insulin. It is intended to accept and display data from the glucose sensor
Target Area
see indications for use
Review Panel
Chemistry
Submission Type
PMA
Device Classification
Class 3
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

No Linked CFR Text

The FDA has not linked product code OYC to any particular section of the CFR (Code of Federal Regulations). There are multiple reasons why this might be the case:

  • The product code was created for a class III submission that does not follow the normal PMN or PMA path - e.g., for a device that falls under HDE (Humanitarian Device Exemption) or EUA (Emergency Use Authorization).
  • The FDA has generated the product code for an existing Class III device, as a result of a PMA supplement that modifies the device in a way that it can't fit under the existing product code originally assigned
  • The product code was created for internal use at the FDA, and not for classification or regulatory-related purposes.

Pump, Infusion, Insulin, To Be Used With Invasive Glucose Sensor

Page Type
Product Code
Definition
The insulin pump is intended to be used as a component of an invasive glucose device. The pump is designed to pump fluid (insulin) into a patient in a controlled manner as an aid in the mangement of diabetes mellitus in persons requiring insulin. It is intended to accept and display data from the glucose sensor.
Physical State
Must include product code MDS, sensor, invasive test system, or product code PQF, sensor, glucose, invasive, non-adjunctive.
Technical Method
The pump is designed to pump fluid (insulin) into a patient in a controlled manner as an aid in the mangement of diabetes mellitus in persons requiring insulin. It is intended to accept and display data from the glucose sensor
Target Area
see indications for use
Review Panel
Chemistry
Submission Type
PMA
Device Classification
Class 3
GMP Exempt?
No
Summary Malfunction Reporting
Ineligible
Implanted Device
No
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

No Linked CFR Text

The FDA has not linked product code OYC to any particular section of the CFR (Code of Federal Regulations). There are multiple reasons why this might be the case:

  • The product code was created for a class III submission that does not follow the normal PMN or PMA path - e.g., for a device that falls under HDE (Humanitarian Device Exemption) or EUA (Emergency Use Authorization).
  • The FDA has generated the product code for an existing Class III device, as a result of a PMA supplement that modifies the device in a way that it can't fit under the existing product code originally assigned
  • The product code was created for internal use at the FDA, and not for classification or regulatory-related purposes.