CARDIOIMMUNE CARDIAC MARKER CONTROL LEVELS 1,2, AND 3

K992430 · Medical Analysis Systems, Inc. · JJT · Aug 30, 1999 · Clinical Chemistry

Device Facts

• Record ID: K992430
• Device Name: CARDIOIMMUNE CARDIAC MARKER CONTROL LEVELS 1,2, AND 3
• Applicant: Medical Analysis Systems, Inc.
• Product Code: JJT · Clinical Chemistry
• Decision Date: Aug 30, 1999
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 862.1660
• Device Class: Class 1

Intended Use

Cardiolmmune Cardiac Marker Control Levels 1, 2, and 3 is intended for use in the clinical laboratory as an assayed control serum suitable for monitoring various immunoassay and general chemistry assays. Include Cardiolmmune Cardiac Marker Control Levels 1, 2, and 3 when assaying for any of the listed constituents. Assay values are provided for the specific systems listed. The user can compare observations with expected ranges as a means of assuring consistent performance of reagent and instrument.

Device Story

CardioImmune Cardiac Marker Control Levels 1, 2, and 3 are assayed control sera used in clinical laboratories. The product serves as a quality control material to monitor the performance of immunoassay and general chemistry analytical systems. Laboratory personnel use the control by assaying it alongside patient samples; observed results are compared against provided expected ranges. This process ensures consistent performance of reagents and instruments, helping to verify the accuracy and reliability of cardiac marker testing.

Clinical Evidence

No clinical data provided; device is an in vitro diagnostic control serum.

Technological Characteristics

Assayed control serum; liquid or lyophilized form (implied by control serum classification); intended for use with clinical laboratory immunoassay and general chemistry instrumentation.

Indications for Use

Indicated for use in clinical laboratories as an assayed control serum to monitor performance of immunoassay and general chemistry assays for cardiac markers.

Regulatory Classification

Identification

A quality control material (assayed and unassayed) for clinical chemistry is a device intended for medical purposes for use in a test system to estimate test precision and to detect systematic analytical deviations that may arise from reagent or analytical instrument variation. A quality control material (assayed and unassayed) may be used for proficiency testing in interlaboratory surveys. This generic type of device includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds), single (specified) analytes, or urinalysis controls.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized caduceus, which is a symbol of medicine and health. The words "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" are arranged in a circle around the caduceus.

## DEPARTMENT OF HEALTH & HUMAN SERVICES

AUG 30 1999

Food and Drug Administration 2098 Gaither Road Rockville MD 20850

Mr. Scot D. Kinghorn Vice President, Quality and Regulatory Affairs Medical Analysis Systems, Inc. 542 Flynn Road Camarillo, California 93012

K992430 Re:

Trade Name: CardioImmune Cardiac Marker Control Levels 1, 2, and 3 Regulatory Class: I Product Code: JJT Dated: July 16, 1999 Received: July 21, 1999

Dear Mr. Kinghorn:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.

{1}------------------------------------------------

Page 2

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at [phone].

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification"(21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or [phone], or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html".

Sincerely yours,

Steven Sutman

Steven I. Gutman, M.D. M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

Page__________________________________________________________________________________________________________________________________________________________________________

510(k) Number (if known): ____________________________________________________________________________________________________________________________________________________

Device Name: _________________________________________________________________________________________________________________________________________________________________

Indications For Use:

510(k) Notification ● July 16, 1999 Cardiolmmune Cardiac Marker Control Levels 1, 2, and 3

## Statement of Indications for Use

Cardiolmmune Cardiac Marker Control Levels 1, 2, and 3 is intended for use in the clinical laboratory as an assayed control serum suitable for monitoring various immunoassay and general chemistry assays.

Include Cardiolmmune Cardiac Marker Control Levels 1, 2, and 3 when assaying for any of the listed constituents. Assay values are provided for the specific systems listed. The user can compare observations with expected ranges as a means of assuring consistent performance of reagent and instrument.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Suter E. Mason

(Division Sign-Off)
Division of Clinical Laboratory Devices

| 510(k) Number | K992430 |
|---------------|---------|
|---------------|---------|

| Prescription Use | ✓ |
|------------------|---|
|------------------|---|

(Per 21 CFR 801.109)

OR

Over-The-Counter Use__________________________________________________________________________________________________________________________________________________________

(Optional Format 1-2-96)