QUALITROL CARDIAC MARKER CONTROL, LEVELS, 1,2 AND 3

K993715 · Seracare Technology · JJT · Nov 16, 1999 · Clinical Chemistry

Device Facts

• Record ID: K993715
• Device Name: QUALITROL CARDIAC MARKER CONTROL, LEVELS, 1,2 AND 3
• Applicant: Seracare Technology
• Product Code: JJT · Clinical Chemistry
• Decision Date: Nov 16, 1999
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 862.1660
• Device Class: Class 1

Intended Use

QUALITROL CARDIAC MARKER CONTROL, Levels 1, 2 and 3, is a liquid human serum based assayed quality control material intended to monitor the performance of clinical test procedures that analyze for indicators of possible cardiac abnormalities.

Device Story

QUALITROL Cardiac Marker Control is a liquid, human serum-based, assayed quality control material. It is used in clinical laboratory settings to monitor the performance and accuracy of test procedures designed to detect cardiac markers. The control is provided in three levels (1, 2, and 3) to assess different points within the analytical range of cardiac marker assays. Laboratory personnel use the control to verify that testing equipment and reagents are functioning correctly, ensuring reliable results for patient samples. By comparing observed values against established target ranges, clinicians can identify potential analytical errors, thereby supporting accurate diagnosis and management of patients with suspected cardiac abnormalities.

Clinical Evidence

No clinical data; bench testing only.

Technological Characteristics

Liquid human serum-based control material. Provided in three levels (1, 2, and 3). Designed for use as an assayed quality control for cardiac marker clinical test procedures.

Indications for Use

Indicated for use as an assayed quality control material to monitor the performance of clinical laboratory test procedures measuring cardiac markers in human serum.

Regulatory Classification

Identification

A quality control material (assayed and unassayed) for clinical chemistry is a device intended for medical purposes for use in a test system to estimate test precision and to detect systematic analytical deviations that may arise from reagent or analytical instrument variation. A quality control material (assayed and unassayed) may be used for proficiency testing in interlaboratory surveys. This generic type of device includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds), single (specified) analytes, or urinalysis controls.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features the department's name arranged in a circular fashion around a symbol. The symbol consists of three stylized, curved lines that resemble a human figure or a flame. The overall design is simple and professional, reflecting the department's role in public health and human services.

NOV I 6 1999

Food and Drug Administration 2098 Gaither Road Rockville MD 20850

Mr. Rusty Sewell Product Development Engineer SeraCare Technology, Inc. DBA, Consolidated Technologies 2170 Woodward Street Austin, Texas 78744-1832

Re: K993715

Trade Name: OUALITROL Cardiac MarkerControl, Level 1, 2 and 3 Regulatory Class: I Product Code: JJT Dated: November 3, 1999 Received: November 3, 1999

Dear Mr. Sewell:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (OS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.

{1}------------------------------------------------

Page 2

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at [phone].

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification"(21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or [phone], or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html".

Sincerely yours.

Steven Sutman

Steven I. Gutman, M.D, M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

## INDICATIONS FOR USE STATEMENT

510(k) number (if known): K_ 937/5____________________________________________________________________________________________________________________________________________

Device name:

QUALITROL CARDIAC MARKER CONTROL, Levels 1 and 2

Indications for use:

QUALITROL CARDIAC MARKER CONTROL, Levels 1, 2 and 3, is a liquid human serum based assayed quality control material intended to monitor the performance of clinical test procedures that analyze for indicators of possible cardiac abnormalities.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

| | <img alt="Signature" src="signature.png"/> |
|---------------------|--------------------------------------------|
| (Division Sign-Off) | |

Division of Clinical Laboratory Devices

| 510(k) Number | K993715 |
|---------------|---------|
|---------------|---------|

Prescription Use
(Per 21 CFR 801.109)

OR

Over-The-Counter Use__________________________________________________________________________________________________________________________________________________________

(Optional Format 1-2-96)