Trochlear Salvage Plating System

K261135 · Skeletal Dynamics, Inc. · HRS · Oct 26, 2026 · Orthopedic

Device Facts

Record IDK261135
Device NameTrochlear Salvage Plating System
ApplicantSkeletal Dynamics, Inc.
Product CodeHRS · Orthopedic
Decision DateOct 26, 2026
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 888.3030
Device ClassClass 2
AttributesTherapeutic

Indications for Use

The Trochlear Salvage System Plates are intended for the fixation of intra-articular distal humerus fractures, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus in skeletally mature patients. The IJS-E component is intended to provide temporary stabilization of the elbow joint following trauma or chronic elbow dislocation

Device Story

System comprises distal humerus plates with PEEK bearing sleeves; interfaces with Internal Joint Stabilization (IJS) components (IJS-E base plate assembly or modified proximal ulna plate). Used by surgeons in clinical settings for bone fixation and temporary elbow joint stabilization. PEEK bearing serves as interface between plates and axis pins. Output is mechanical stabilization of fracture/joint; aids healing by maintaining alignment and stability. Benefits include restoration of joint function and fracture healing.

Clinical Evidence

Bench testing only. Fatigue and wear testing performed on the Trochlear Salvage System to evaluate mechanical performance and PEEK bearing wear under clinically relevant conditions. Results demonstrate system meets fatigue requirements and exhibits acceptable wear behavior, maintaining functional integrity.

Technological Characteristics

Metallic bone fixation plates and screws; PEEK bearing sleeves; Ti6Al4V ELI components. Mechanical fixation principle. System is modular, interfacing with existing IJS constructs. Sterilization method not specified. No software or electronic components.

Indications for Use

Indicated for skeletally mature adults requiring fixation of intra-articular distal humerus fractures, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus, or temporary stabilization of the elbow joint following trauma or chronic dislocation.

Regulatory Classification

Identification

Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.

Predicate Devices

Reference Devices

Submission Summary (Full Text)

{1} **U.S. FOOD & DRUG** ADMINISTRATION October 26, 2026 Skeletal Dynamics, Inc. Alexandra Rodriguez Director of Regulatory Affairs 7300 N. Kendall Dr. Suite 800 Miami, Florida 33156 Re: K261135 Trade/Device Name: Trochlear Salvage Plating System Regulation Number: 21 CFR 888.3030 Regulation Name: Single/Multiple Component Metallic Bone Fixation Appliances And Accessories Regulatory Class: Class II Product Code: HRS, OZI Dated: September 23, 2026 Received: September 24, 2026 Dear Alexandra Rodriguez Rojas: We have reviewed your section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database available at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. U.S. Food & Drug Administration 10903 New Hampshire Avenue Silver Spring, MD 20993 www.fda.gov {2} K261135 - Alexandra Rodriguez Rojas Page 2 Before making any change significantly affecting the safety or effectiveness of the device, you must submit a new premarket notification in accordance with 21 CFR 807.81. Additional information about changes that may require a new premarket notification are provided in the FDA guidance documents entitled "Deciding When to Submit a 510(k) for a Change to an Existing Device" (https://www.fda.gov/media/99812/download) and "Deciding When to Submit a 510(k) for a Software Change to an Existing Device" (https://www.fda.gov/media/99785/download). Your device is also subject to, among other requirements, the Quality Management System Regulation (QMSR) (21 CFR Part 820), which includes, but is not limited to, ISO 13485 clause 7.3 (Design controls), ISO 13485 clause 8.3 (Nonconforming product), ISO 13485 clause 8.5.2 (Corrective action), and ISO 13485 clause 8.5.3 (Preventative action). Please note that regardless of whether a change requires premarket review, the QMSR requires device manufacturers to review and approve changes to device design and production (ISO 13485 clause 7.3 and ISO 13485 clause 7.5) and document changes and approvals in the Medical Device File (ISO 13485 clause 4.2.3). Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR Part 803) for devices or postmarketing safety reporting (21 CFR Part 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reporting-combination-products); good manufacturing practice requirements as set forth in the Quality Management System Regulation (QMSR) (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR Part 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR Parts 1000-1050. All medical devices, including Class I and unclassified devices and combination product device constituent parts are required to be in compliance with the final Unique Device Identification System rule ("UDI Rule"). The UDI Rule requires, among other things, that a device bear a unique device identifier (UDI) on its label and package (21 CFR 801.20(a)) unless an exception or alternative applies (21 CFR 801.20(b)) and that the dates on the device label be formatted in accordance with 21 CFR 801.18. The UDI Rule (21 CFR 830.300(a) and 830.320(b)) also requires that certain information be submitted to the Global Unique Device Identification Database (GUDID) (21 CFR Part 830 Subpart E). For additional information on these requirements, please see the UDI System webpage at https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/unique-device-identification-system-udi-system. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-devices/medical-device-safety/medical-device-reporting-mdr-how-report-medical-device-problems. For comprehensive regulatory information about medical devices and radiation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the {3} K261135 - Alexandra Rodriguez Rojas Page 3 Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-devices/device-advice-comprehensive-regulatory-assistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email (DICE@fda.hhs.gov) or phone (1-800-638-2041 or 301-796-7100). Sincerely, CHRISTOPHER FERREIRA -S Christopher Ferreira, M.S. Assistant Director DHT6C: Division of Restorative, Repair, and Trauma Devices OHT6: Office of Orthopedic Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health Enclosure {4} | Indications for Use | | | | --- | --- | --- | | Please type in the marketing application/submission number, if it is known. This textbox will be left blank for original applications/submissions. | K261135 | ? | | Please provide the device trade name(s). | | ? | | Trochlear Salvage Plating System | | | | Please provide your Indications for Use below. | | ? | | The Trochlear Salvage System Plates are intended for the fixation of intra-articular distal humerus fractures, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus in skeletally mature patients. The IJS-E component is intended to provide temporary stabilization of the elbow joint following trauma or chronic elbow dislocation | | | | Please select the types of uses (select one or both, as applicable). | ☑ Prescription Use (21 CFR 801 Subpart D) ☐ Over-The-Counter Use (21 CFR 801 Subpart C) | ? | | Please select the age group(s) for which the device(s) is to be used. | ☐ Neonates/Newborns (Birth to < 29 days old) ☐ Infants (29 days old to < 2 years old) ☐ Children (2 years old to < 12 years old) ☐ Adolescents (12 years old to < 22 years old) ☑ Adults (22 years old and greater) | ? | {5} 510(k) #: K261135 # 510(k) Summary Prepared on: 2026-10-14 Contact Details 21 CFR 807.92(a)(1) | Applicant Name | Skeletal Dynamics Inc | | --- | --- | | Applicant Address | 7300 North Kendall Drive Miami fl 33156 United States | | Applicant Contact Telephone | 305-596-7585 | | Applicant Contact | Ms. Alexandra Rodriguez Rojas | | Applicant Contact Email | arodriguez@skeletaldynamics.com | Device Name 21 CFR 807.92(a)(2) | Device Trade Name | Trochlear Salvage Plating System | | --- | --- | | Common Name | Single/multiple component metallic bone fixation appliances and accessories | | Classification Name | Plate, Fixation, Bone / Internal Hinged Elbow Fixator | | Regulation Number | 888.3030 | | Product Code(s) | HRS, OZI | Legally Marketed Predicate Devices 21 CFR 807.92(a)(3) | Predicate # | Predicate Trade Name (Primary Predicate is listed first) | Product Code | | --- | --- | --- | | K213895 | Distal Humerus Plating System | HRS | | K231447 | Double Internal Joint Stabilizer- Elbow | OZI | | K223318 | Internal Joint Stabilizer- Elbow | OZI | Device Description Summary 21 CFR 807.92(a)(4) The Skeletal Dynamics Trochlear Salvage Plating System includes distal humerus plates, referred to within this system as trochlear salvage plates, with PEEK bearing sleeves located in the most distal holes. These components are intended to interface with either the Double Internal Joint Stabilization (IJS) System (K231447), modified for use with a Ti6Al4V ELI Proximal Ulna Plate (K231623), or the IJS-E Base Plate Assembly, Proximal Ulna Plate (K223318). Intended Use/Indications for Use 21 CFR 807.92(a)(5) The Trochlear Salvage System Plates are intended for the fixation of intra-articular distal humerus fractures, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus in skeletally mature patients. The IJS-E component is intended to provide temporary stabilization of the elbow joint following trauma or chronic elbow dislocation Indications for Use Comparison 21 CFR 807.92(a)(5) The Trochlear Salvage Plating System (TSS) is substantially equivalent to the Skeletal Dynamics Distal Humerus Plating System (K213895) and the previously cleared Internal Joint Stabilizer (IJS) Systems (K231447 and K223318). The subject and predicate systems have the same intended use and similar indications for use. Specifically, the Trochlear Salvage System {6} Plates are intended for the fixation of intra-articular distal humerus fractures, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus in skeletally mature patients. The IJS-E component is intended to provide temporary stabilization of the elbow joint following trauma or chronic elbow dislocation. The predicate Distal Humerus Plating System is indicated for intra-articular fractures of the distal humerus, comminuted supracondylar fractures, osteotomies, and non-unions of the distal humerus. The predicate Internal Joint- Stabilizer – Elbow is intended to provide temporary stabilization of the elbow joint after trauma or chronic elbow dislocation. Thus, since the subject Trochlear Salvage Plating System indications for use fall within the intended use of the predicate devices, the subject device satisfies the first criterion for finding substantial equivalence. ## Technological Comparison 21 CFR 807.92(a)(6) The Trochlear Salvage Plating System (TSS) is substantially equivalent to the Skeletal Dynamics Distal Humerus Plating System (K213895) and the previously cleared Internal Joint Stabilizer (IJS) Systems (K231447 and K223318). The Trochlear Salvage Plating System has the same general intended use, similar indications for use, and comparable technological characteristics and principles of operation as the identified predicate devices. Both predicate systems include the same type of components with similar designs (bone plates, screws, and IJS constructs) as the subject device. The primary difference between the subject device and its predicate devices is the inclusion of a PEEK bearing, which serves as an interface between the trochlear salvage plates and the trochlear salvage axis pins. Any differences in technological characteristics or indications for use are minor and do not raise new questions of safety or effectiveness. Performance testing, including bench evaluations, demonstrates that the Trochlear Salvage Plating System performs in a manner that is as safe and effective as the predicate devices. ## Non-Clinical and/or Clinical Tests Summary & Conclusions 21 CFR 807.92(b) Fatigue and wear testing were conducted on the Skeletal Dynamics Trochlear Salvage System (TSS) to evaluate mechanical performance and characterize wear of the PEEK bearing components under clinically relevant conditions. The TSS meets fatigue performance requirements and demonstrates acceptable wear behavior under clinically relevant conditions. The PEEK bearing components maintain mechanical and functional integrity, and the observed wear does not adversely impact the safety or effectiveness of the device for its intended use. All screws included in the system were previously evaluated and cleared under K213895; therefore, additional testing for the screws was not required.
Innolitics
Guidance Recalls

Panel 1

/
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...