SYNTHES LCP DIAPHYSEAL-METAPHYSEAL (DIA-META) VOLAR DISTAL RADIUS PLATES

K070946 · Synthes (Usa) · HRS · Jun 6, 2007 · Orthopedic

Device Facts

• Record ID: K070946
• Device Name: SYNTHES LCP DIAPHYSEAL-METAPHYSEAL (DIA-META) VOLAR DISTAL RADIUS PLATES
• Applicant: Synthes (Usa)
• Product Code: HRS · Orthopedic
• Decision Date: Jun 6, 2007
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 888.3030
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Synthes LCP Dia-Meta Volar Distal Radius Plates are indicated for fractures, osteotomies, and non-unions of the radius and other small bones.

Device Story

Synthes LCP Dia-Meta Volar Distal Radius Plates provide stable internal fixation for radius fractures; osteotomies; non-unions. Plates feature threaded locking holes in head for 2.4 mm locking screws; dynamic compression holes combined with locking holes in shaft for 3.5 mm cortex, 3.5 mm locking, or 4.0 mm cancellous screws. Available in various lengths; right/left versions to accommodate patient anatomy. Used by orthopedic surgeons in clinical/surgical settings to stabilize bone segments; promote healing. Mechanical fixation device; no software or electronic components.

Technological Characteristics

Metallic bone fixation plate; titanium or stainless steel construction. Features threaded locking holes and dynamic compression holes. Compatible with 2.4 mm locking screws, 3.5 mm cortex/locking screws, and 4.0 mm cancellous screws. Mechanical device; no software, energy source, or connectivity.

Indications for Use

Indicated for patients requiring fixation for fractures, osteotomies, and non-unions of the radius and other small bones.

Regulatory Classification

Identification

Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.

Predicate Devices

• Synthes Locking Distal Radius Plating System
• Synthes Small Fragment Dynamic Compression Locking System

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/0 description: The image shows the word "SYNTHES" in bold, black letters. To the left of the word is a circular logo with a design inside. There is a registered trademark symbol to the right of the word.

3.0

:

## K07D946 (page 1/1)

| 510(k) Summary | | Page 1 of 1 |
|-----------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|
| Sponsor: | Synthes (USA)<br>1301 Goshen Parkway<br>West Chester, PA 19380<br>[phone] | JUN - 6 2007 |
| Contact: | Sheri L. Musgnung<br>Synthes (USA)<br>1301 Goshen Parkway<br>West Chester, PA 19380<br>[phone] | |
| Device Name: | Synthes LCP Diaphyseal-Metaphyseal (Dia-Meta) Volar Distal<br>Radius Plate | |
| Classification: | Class II, §888.3030 - Single/multiple component metallic bone<br>fixation appliances and accessories | |
| Predicate Device: | Synthes Locking Distal Radius Plating System<br>Synthes Small Fragment Dynamic Compression Locking System | |
| Device Description: | The Synthes LCP Dia-Meta Volar Distal Radius Plates provide<br>stable fixation for radius fractures. The plates have threaded<br>locking holes in the head of the plate that accept 2.4 mm locking<br>screws, and dynamic compression holes combined with locking<br>holes in the shaft of the plate which accept 3.5 mm cortex, 3.5 mm<br>locking, or 4.0 mm cancellous screws. The plates are available in<br>various lengths and are available in right and left versions to<br>accommodate varying patient anatomy. The plates are<br>manufactured in either titanium or stainless steel. | |
| Intended Use: | Synthes LCP Dia-Meta Volar Distal Radius Plates are indicated for<br>fractures, osteotomies, and non-unions of the radius and other<br>small bones. | |
| Substantial<br>Equivalence: | Information presented supports substantial equivalence. | |

{1}------------------------------------------------

Image /page/1/Picture/1 description: The image shows the seal of the U.S. Department of Health and Human Services. The seal features a stylized eagle with three stripes representing the three branches of government. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" is arranged in a circular pattern around the eagle.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Synthes (USA) % Ms. Sheri L Musgnung Senior Regulatory Affairs Specialist 1301 Goshen Parkway West Chester, Pennsylvania 19380

Re: K070946

Trade/Device Name: Synthes LCP Diaphyseal-Metaphyseal (Dia-Meta) Volar Distal Radius Plate Regulation Number: 21 CFR 888. 3030 Regulation Name: Single/multiple component metallic bone fixation appliances and accessories Regulatory Class: II Product Code: HRS Dated: April 3, 2007 Received: April 4, 2007

Dear Ms. Musgnung:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set

JUN -6 2007

{2}------------------------------------------------

Page 2 - Ms. Sheri L Musgnung

forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at toll-free number [phone] or [phone] or the Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours,

fontarebrent

Mark N. Melker Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{3}------------------------------------------------

Image /page/3/Picture/0 description: The image shows the word "SYNTHES" in bold, black letters. To the left of the word is a circular logo with a design inside. A horizontal line runs beneath the word. The "R" in "SYNTHES" has a registered trademark symbol next to it.

Indications for Use

4070946

510(k) Number (if known):

Device Name:

Synthes LCP Diaphyseal-Metaphyseal (Dia-Meta) Volar Distal Radius Plates

Indications for Use:

Synthes LCP Dia-Meta Volar Distal Radius Plates are indicated for fractures, osteotomies, and non-unions of the radius and other small bones.

Prescription Use _ X (Per 21 CFR 801.109)

. AND/OR

Over-The-Counter Use (21 CFR 807 Subpart C)

- 4 -

(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Verlane Brechd for war

(Division Sign-( Division of General, Restorative, and Neurological Devices

510(k) Number K070946

2.0