STARFLOW HV

K020760 · Danville Materials, Inc. · EBF · May 3, 2002 · Dental

Device Facts

• Record ID: K020760
• Device Name: STARFLOW HV
• Applicant: Danville Materials, Inc.
• Product Code: EBF · Dental
• Decision Date: May 3, 2002
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.3690
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Starflow HV is intended for use for the restoration of Class III, Class IV, and Class V cavities, small Class I cavities not in occlusion, repair of enamel defects, repair of porcelain restorations, minor occusal build-ups in non-stress bearing areas, pit and fissure sealant, cement for seramic/composite veneers, incisal abrasions, and core build-ups.

Device Story

Starflow HV is a light-cured, hybrid dental restorative material. It consists of BIS/GMA resin and Barium aluminosilicate glass filler (64% by weight). The device is used by dental professionals in a clinical setting to restore tooth structure or repair dental restorations. The material is applied to the target area and cured with a dental light source. It functions as a flowable restorative, sealant, or cement, providing structural support and aesthetic repair for various dental defects and cavities. The output is a hardened, tooth-colored resin restoration that benefits the patient by restoring tooth function and appearance.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Light-cured, hybrid dental restorative. Composition: BIS/GMA resin and Barium aluminosilicate glass filler (64% by weight). Form factor: flowable resin. Energy source: external dental curing light.

Indications for Use

Indicated for dental patients requiring restoration of Class III, IV, and V cavities, small Class I cavities (non-occlusal), enamel defect repair, porcelain restoration repair, minor non-stress bearing occlusal build-ups, pit and fissure sealing, cementation of ceramic/composite veneers, incisal abrasion treatment, and core build-ups.

Regulatory Classification

Identification

Tooth shade resin material is a device composed of materials such as bisphenol-A glycidyl methacrylate (Bis-GMA) intended to restore carious lesions or structural defects in teeth.

Predicate Devices

• Revolution by Sybron Dental Specialties (K013647)
• StarFlow by Danville Materials Inc (K990108)
• Tetric Flow (K993783) by Ivoclar Vivadent

Submission Summary (Full Text)

{0}------------------------------------------------

MAY 0 3 2002

K020760

510(k) Summary of Safety and Effectiveness (As Required by 21 C.F.R. §807.92)

| Submitted by: | Craig Bruns<br>Vice President<br>Danville Materials, Inc.<br>2021 Omega Dr.<br>San Ramon, CA 94583<br>Phone [phone]<br>Fax [phone]<br>e-mail: [e-mail] |
|----------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Date of summary | February 14, 2002 |
| Device name | Starflow HV |
| Common name | Tooth Shade Resin Material |
| Classification names | Regulation Number |
| | 21 CFR 872.3690 |
| | Product Code |
| | EBF |
| Device Description | Starflow HV is a light-cured, hybrid dental retorative which incorporates<br>BIS/GMA resin along with Barium aluminosilicate glass filler (64% by wt) to<br>yield a flowable dental restorative. |
| Predicate Device | The device is substantially equivalent to other legally marketed devices in the<br>United States including Revolution by Sybron Dental Specialties (K013647),<br>StarFlow by Danville Materials Inc (K990108), and Tetric Flow (K 993783) by<br>Ivoclar Vivadent. The primary differences are very minor changes to the<br>material composition. |
| Intended Use | Starflow HV is intended for use for the restoration of Class III, Class IV, and<br>Class V cavities, small Class I cavities not in occlusion, repair of enamel<br>defects, repair of porcelain restorations, minor occusal build-ups in non-stress<br>bearing areas, pit and fissure sealant, cement for seramic/composite veneers,<br>incisal abrasions, and core build-ups. |

{1}------------------------------------------------

## DEPARTMENT OF HEALTH & HUMAN SERVICES

Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features a stylized image of an eagle with three lines representing its wings. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" is arranged in a circular pattern around the eagle.

#### Public Health Service

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

# MAY 0 3 2002

Mr. Craig R. Bruns Vice President & General Manager Danville Materials, Incorporated 2021 Omega Drive San Ramon, California 94583

Re: K020760

Trade/Device Name: Starflow HV Regulation Number: 872.3690 Regulation Name: Tooth Shade Resin Material Regulatory Class: II Product Codes: EBF Dated: February 20, 2002 Received: March 07, 2002

### Dear Mr. Bruns:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies.

{2}------------------------------------------------

## Page 2 - Mr. Craig R. Bruns

You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html

Sincerely yours,

Timothy A. Ulatowski Director Division of Dental. Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{3}------------------------------------------------

Page / of /

1020760

510(k) Number:

Device Name: Starflow HV

Indications for use:

Starflow HV is intended for use for the restoration of Class IV, and Class V cavities, small Class Daarrow 11-11-15 in occlusion, repair of enamel defects, repair of porcelain restorations, minor occusal buildr variato not in obtained, reas, pit and fissure sealant, cement for seramic/composite veneers, incisal abrasions, and core build-ups.

(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

| | <img alt="Signature" src="signature.png"/> |
|---------------------------------------------------------------------|--------------------------------------------|
| (Division Sign-Off) | |
| Division of Dental, Infection Control, and General Hospital Devices | |
| 510(k) Number | K020760 |

| Prescription Use (Per 21 CFR 801.109) | OR | Over-The-Counter Use |
|---------------------------------------|----|----------------------|
|---------------------------------------|----|----------------------|

(Optional Format 1-2-96)

ರಿ