STRYKER TRAUMA PELVIC SET

K001614 · Howmedica Osteonics Corp. · KTW · Aug 4, 2000 · Orthopedic

Device Facts

Record IDK001614
Device NameSTRYKER TRAUMA PELVIC SET
ApplicantHowmedica Osteonics Corp.
Product CodeKTW · Orthopedic
Decision DateAug 4, 2000
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 888.3030
Device ClassClass 2
AttributesTherapeutic

Intended Use

The Stryker Trauma Pelvic Set is indicated for: - Fractures of the acetabulum, sacrum, illium, and entire pelvic ring . - Revision surgery of pseoduarthroses, non-unions and mal-unions . - Osteonomies ● - Arthrodeses ● - . Sacroilic joint dislocations - Symphysis pubis disruptures ●

Device Story

Stryker Trauma Pelvic Set consists of bone plates and screws for orthopedic fixation. System includes reconstruction plates, pelvic plates, and symphysis-pubis plates in varying lengths and thicknesses (1.2mm to 2.5mm), paired with 3.5mm and 4.5mm diameter screws. Used by surgeons in clinical/OR settings to stabilize pelvic fractures, dislocations, and perform reconstructive procedures like osteotomies or arthrodeses. Devices provide mechanical support to bone segments to facilitate healing and restore structural integrity. Provided sterile or non-sterile.

Clinical Evidence

Bench testing only.

Technological Characteristics

Components manufactured from stainless steel conforming to ASTM F-138. System includes various plate geometries and 3.5mm/4.5mm diameter screws. Sterilization provided for both sterile and non-sterile configurations.

Indications for Use

Indicated for patients requiring surgical fixation of pelvic fractures (acetabulum, sacrum, ilium, pelvic ring), revision surgery for pseudoarthroses, non-unions, or mal-unions, osteotomies, arthrodeses, sacroiliac joint dislocations, and symphysis pubis disruptions.

Regulatory Classification

Identification

Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ #### 4 2000 AUG # 510(k) PREMARKET NOTIFICATION SUMMARY OF SAFETY AND EFFECTIVENESS Stryker Trauma Pelvic Set # Submission Information Name and Address of the Sponsor of the 510(k) Submission: Howmedica Osteonics Corp. 59 Route 17 Allendale, NJ 07401-1677 201-825-4900 Regulatory Affairs Team Member Mary-Catherine Dillon March 23, 2000 Contact Person: Date Summary Prepared: Device Identification Proprietary Name: Common Name: Classification Name and Reference: Stryker Trauma Pelvic Set Pelvic Set Plate, Fixation, Bone 21 CFR §888.3030 # Predicate Device Identification The Stryker Trauma Pelvic Set is substantially equivalent to the Synthes Pelvic Implant Set. ### Device Description Device Description I he buyker Trainia Perrobulum plates, and symphysis-pubis plates. All curves and straight plate pervice plates, buttight accuse pravidens and 2.5mm thicknesses. The symphysis-pubis plates are components arouventions in rotening 1.2mm thickness. The subject components vary in length from also available in a 12.5mm Water and shincludes 3.5mm diameter and 4.5mm diameter screws. All devices in the system are provided both sterile and non-sterile. ### Intended Use The Stryker Trauma Pelvic Set is indicated for: - Fractures of the acetabulum, sacrum, illium, and entire pelvic ring . - Revision surgery of pseoduarthroses, non-unions and mal-unions . Kooib14 {1}------------------------------------------------ - Osteonomies ● - Arthrodeses ● - . Sacroilic joint dislocations - Symphysis pubis disruptures ● # Materials The subject components are manufactured from stainless steel which conforms to ASTM F-138. # Statement of Technological Comparison The subject components of the Stryker Trauma Pelvic Set are substantially equivalent in design and intended use to the predicate device offered by Synthes. {2}------------------------------------------------ ## DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle or bird-like figure, represented by three curved lines that suggest the shape of a bird in flight. #### Public Health Service Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 #### 4 2000 AUG Ms. Mary-Catherine Dillon Regulatory Affairs Specialist Howmedica Osteonics Corporation 59 Route 17 Allendale, New Jersey 07401-1677 Re: K001614 Trade Name: Stryker Trauma Pelvic Set Regulatory Class: II Product Code: KTW Dated: May 24, 2000 Received: May 25, 2000 ### Dear Ms. Dillon: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general control provisions of the Act. The general control provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Flectronic Product Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally parketed predicate device results in a classification for your device and thus, permits your dryice to proceed to the market. {3}------------------------------------------------ ### Page 2 - Ms. Mary-Catherine Dillon If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4659. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or at (301) 443-6597, or at its Internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, Duma R. Lochner. Celia M. Witten, Ph.D., M.D. Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ # 510(k) Number (if known): KOO ﺎ ﻫﺎﻟﻢ ﺍ ﻫﺎﻟﻜ Device Name: Stryker Trauma Pelvic Set Indications For Use: The Stryker Trauma Pelvic Set is indicated for: - Fractures of the acetabulum, sacrum, illium, and entire pelvic ring - Revision surgery of pseoduarthroses, non-unions and mal-unions - Osteonomies - . Arthrodeses - Sacroilic joint dislocations - Symphysis pubis disruptures (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Dune R. Vochner. (Division Sign-Off) Division of General Restorative Devices 510(k) Number KOO 1614 Prescription Use (Per 21 CFR 801.109) OR Over-The-Counter Use (Optional Format 1-2-96)
Innolitics
510(k) Summary
Decision Summary
Classification Order
Enter a record ID and click Load to view the document.
100%