Progenikine Concentrating System 25 mL System

K191564 · Emcyte Corporation · MUU · Nov 7, 2019 · General, Plastic Surgery

Device Facts

• Record ID: K191564
• Device Name: Progenikine Concentrating System 25 mL System
• Applicant: Emcyte Corporation
• Product Code: MUU · General, Plastic Surgery
• Decision Date: Nov 7, 2019
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 878.5040
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

The Progenikine Concentrating System is used in medical procedures involving the harvesting of autologous adipose tissue. The Progenikine® Concentrating System is used for concentrating adipose tissue harvested with a legally marketed lipoplasty system. The Progenikine Concentrating System is intended for use in the following surgical specialties when the concentration of harvested adipose tissue is desired. Neurosurgery, Gastrointestinal Surgery, Urological Surgery, Plastic and Re-constructive Surgery, General Surgery, Orthopedic Surgery, Gynecological Surgery, Laparoscopic Surgery, Arthroscopic Surgery.

Device Story

Progenikine Concentrating System processes autologous adipose tissue harvested via legally marketed lipoplasty systems; device concentrates harvested tissue for clinical use; intended for use in various surgical specialties including neurosurgery, orthopedic, and plastic surgery; operated by clinicians in surgical settings; provides concentrated adipose tissue for re-implantation; benefits patient by facilitating autologous tissue grafting procedures.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

System for concentrating autologous adipose tissue; mechanical processing; 25 mL system capacity; classified under 21 CFR 878.5040 (Suction Lipoplasty System).

Indications for Use

Indicated for patients undergoing medical procedures requiring the concentration of autologous adipose tissue harvested via a legally marketed lipoplasty system across various surgical specialties including neurosurgery, GI, urology, plastic/reconstructive, general, orthopedic, gynecological, laparoscopic, and arthroscopic surgery.

Regulatory Classification

Identification

A suction lipoplasty system is a device intended for aesthetic body contouring. The device consists of a powered suction pump (containing a microbial filter on the exhaust and a microbial in-line filter in the connecting tubing between the collection bottle and the safety trap), collection bottle, cannula, and connecting tube. The microbial filters, tubing, collection bottle, and cannula must be capable of being changed between patients. The powered suction pump has a motor with a minimum of 1/3 horsepower, a variable vacuum range from 0 to 29.9 inches of mercury, vacuum control valves to regulate the vacuum with accompanying vacuum gauges, a single or double rotary vane (with or without oil), a single or double diaphragm, a single or double piston, and a safety trap.

Special Controls

*Classification.* Class II (special controls). Consensus standards and labeling restrictions.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/0 description: The image contains the logo of the U.S. Food and Drug Administration (FDA). The logo consists of two parts: the Department of Health & Human Services logo on the left and the FDA logo on the right. The FDA logo features the letters "FDA" in a blue square, followed by the words "U.S. FOOD & DRUG ADMINISTRATION" in blue text.

November 07, 2019

Emcyte Corporation Patrick Pennie Chairman and CEO 4331 Veronica S. Shoemaker Blvd, Suite 4 Fort Meyers, Florida 33916

Re: K191564

Trade/Device Name: Progenikine Concentrating System 25 mL System Regulation Number: 21 CFR 878.5040 Regulation Name: Suction Lipoplasty System Regulatory Class: Class II Product Code: MUU Dated: June 7, 2019 Received: June 13, 2019

Dear Patrick Pennie:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. Although this letter refers to your product as a device, please be aware that some cleared products may instead be combination products. The 510(k) Premarket Notification Database located at https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm identifies combination product submissions. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's

{1}------------------------------------------------

requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803) for devices or postmarketing safety reporting (21 CFR 4, Subpart B) for combination products (see https://www.fda.gov/combination-products/guidance-regulatory-information/postmarketing-safety-reportingcombination-products); good manufacturing practice requirements as set forth in the quality systems (OS) regulation (21 CFR Part 820) for devices or current good manufacturing practices (21 CFR 4, Subpart A) for combination products; and, if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to https://www.fda.gov/medical-device-safety/medical-device-reportingmdr-how-report-medical-device-problems.

For comprehensive regulatory information about mediation-emitting products, including information about labeling regulations, please see Device Advice (https://www.fda.gov/medicaldevices/device-advice-comprehensive-regulatory-assistance) and CDRH Learn (https://www.fda.gov/training-and-continuing-education/cdrh-learn). Additionally, you may contact the Division of Industry and Consumer Education (DICE) to ask a question about a specific regulatory topic. See the DICE website (https://www.fda.gov/medical-device-advice-comprehensive-regulatoryassistance/contact-us-division-industry-and-consumer-education-dice) for more information or contact DICE by email ([e-mail]) or phone [phone] or 301-796-7100).

Sincerely,

For Cindy Chowdhury, Ph.D., M.B.A. Acting Assistant Director DHT4B: Division of Infection Control and Plastic Surgery Devices OHT4: Office of Surgical and Infection Control Devices Office of Product Evaluation and Quality Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

## Indications for Use

510(k) Number (if known) K191564

Device Name Progenikine Concentrating System

## Indications for Use (Describe)

The Progenikine Concentrating System is used in medical procedures involving the harvesting of autologous adipose tissue. The Progenikine® Concentrating System is used for concentrating adipose tissue harvested with a legally marketed lipoplasty system. The Progenikine Concentrating System is intended for use in the following surgical specialties when the concentration of harvested adipose tissue is desired.

Neurosurgery, Gastrointestinal Surgery, Urological Surgery, Plastic and Re-constructive Surgery, General Surgery, Orthopedic Surgery, Gynecological Surgery, Laparoscopic Surgery, Arthroscopic Surgery.

| Type of Use (Select one or both, as applicable) | |
|---------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------|
| <div style="display:flex; align-items:center;"><input checked="" type="checkbox"/> Prescription Use (Part 21 CFR 801 Subpart D)</div> | <div style="display:flex; align-items:center;"><input type="checkbox"/> Over-The-Counter Use (21 CFR 801 Subpart C)</div> |

## CONTINUE ON A SEPARATE PAGE IF NEEDED.

This section applies only to requirements of the Paperwork Reduction Act of 1995.

## *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.*

The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:

> Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff [e-mail]

"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."