K973183 · R & D Medical Products, Inc. · KGZ · Jan 23, 1998 · General, Plastic Surgery
Device Facts
Record ID
K973183
Device Name
WOUND DRAINAGE HOLDER
Applicant
R & D Medical Products, Inc.
Product Code
KGZ · General, Plastic Surgery
Decision Date
Jan 23, 1998
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 878.4200
Device Class
Class 1
Intended Use
The wound drainage reservoir holder is to be used when the patent is using a Jackson-Pratt 100cc Suction Reservoir and would prefer to have the reservoir attached directly against his or her body instead of attaching it with a safety pin to one of the clothing garments they are wearing.
Device Story
Wound drainage reservoir holder; designed to secure Jackson-Pratt 100cc suction reservoirs to patient's body; alternative to safety-pinning reservoir to clothing; used by patients in home or clinical settings; improves patient comfort and convenience by providing a dedicated attachment mechanism.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Mechanical holder for 100cc suction reservoir; non-powered; patient-worn accessory.
Indications for Use
Indicated for patients using a Jackson-Pratt 100cc Suction Reservoir who prefer to secure the reservoir directly to their body rather than pinning it to clothing.
Regulatory Classification
Identification
An introduction/drainage catheter is a device that is a flexible single or multilumen tube intended to be used to introduce nondrug fluids into body cavities other than blood vessels, drain fluids from body cavities, or evaluate certain physiologic conditions. Examples include irrigation and drainage catheters, pediatric catheters, peritoneal catheters (including dialysis), and other general surgical catheters. An introduction/drainage catheter accessory is intended to aid in the manipulation of or insertion of the device into the body. Examples of accessories include adaptors, connectors, and catheter needles.
Related Devices
K231063 — SOMAVAC® 100 Sustained Vacuum System · Somavac Medical Solutions, Inc. · May 12, 2023
K222856 — SOMAVAC 100 Sustained Vacuum System · Somavac Medical Solutions, Inc. · Oct 19, 2022
K161599 — UNO Negative Pressure Wound Therapy System · Genadyne Biotechnologies, Inc. · Apr 6, 2017
K960955 — JACKSON-PRATT GOLD WOUND DRAINS WITH DURAFLO II COATING · Baxter Healthcare Corp · May 22, 1996
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular border with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES (USA)" arranged around the perimeter. Inside the circle is a stylized image of an eagle with three human profiles incorporated into its design.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. David A. Sheraton *President R & D Medical Products, Incorporated One Technology Drive, Building E, Suite 307 Irvine, California 92618
Re: K973183 Trade Name: Wound Drainage Holder Regulatory Class: I Product Code: KGZ Dated: October 27, 1997 Received: October 31, 1997
Dear Mr. Sheraton:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations. Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirements , as set forth in the Quality System Regulation (OS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for
JAN 2 3 1998
{1}------------------------------------------------
Page 2 - Mr. David A. Sheraton
devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4595. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely vours.
2 Celia M. Witten, Ph.D., M.D. Director Division of General and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
## Indication for Use
The wound drainage reservoir holder is to be used when the patent is using a Jackson-Pratt 100cc Suction Reservoir and would prefer to have the reservoir attached directly against his or her body instead of attaching it with a safety pin to one of the clothing garments they are wearing.
Prescription Use
(Per 21 CFR 801.109)
ion C 1-973183 5 | O(K) Ne
1025a97
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.