← Product Code [GDW](/submissions/SU/subpart-e%E2%80%94surgical-devices/GDW) · K970817 # MICROMARK CLIP (K970817) _Biopsys Medical, Inc. · GDW · Sep 11, 1997 · General, Plastic Surgery · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/SU/subpart-e%E2%80%94surgical-devices/GDW/K970817 ## Device Facts - **Applicant:** Biopsys Medical, Inc. - **Product Code:** [GDW](/submissions/SU/subpart-e%E2%80%94surgical-devices/GDW.md) - **Decision Date:** Sep 11, 1997 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 878.4750 - **Device Class:** Class 2 - **Review Panel:** General, Plastic Surgery ## Indications for Use The MicroMark clip is intended to staple soft breast tissue at the surgical site during an open or percutaneous biopsy procedure and radiographically mark the location. It is indicated for use to radiographically mark breast tissue following an open surgical breast biopsy or percutaneous breast biopsy. ## Device Story MicroMark Clip is a non-absorbable marker applied to soft breast tissue during open or percutaneous biopsy procedures. The device is deployed using a manual applier. Its primary function is to provide a radiographic marker at the surgical site, allowing clinicians to identify the biopsy location on subsequent X-ray imaging. The device is intended for use by physicians in clinical settings. By marking the biopsy site, the device assists in long-term follow-up and localization of the tissue area previously sampled. ## Clinical Evidence No clinical data provided; substantial equivalence is based on identical design, materials, and intended use to the predicate device. ## Technological Characteristics Non-absorbable material compatible with X-ray imaging; manual deployment mechanism; form factor designed for soft tissue marking. ## Regulatory Identification An implantable staple is a staple-like device intended to connect internal tissues to aid healing. It is not absorbable. ## Predicate Devices - BMI Surgical Staple Marker ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0} K970817 SEP 11 1997 APPENDIX V Summary of Safety and Effectiveness ## DETERMINATION OF SUBSTANTIAL EQUIVALENCE The MicroMark clip is substantially equivalent to the BMI Surgical Staple Marker. The MicroMark clip has technologic characteristics which are substantially equivalent to the predicate device. ## COMPANY AND CONTACT PERSON Biopsys Medical, Inc. (BMI) 3 Morgan Irvine, CA 92618 Mark A. Cole, Ph.D. 714-460-7800 ## DEVICE NAME MicroMark™ Clip ## NAME OF PREDICATE OR LEGALLY MARKETED DEVICE BMI Surgical Staple Marker ## STATEMENT OF INTENDED USE The MicroMark intended use is to be applied to soft breast tissue during open or percutaneous procedures and radiographically mark the surgical location. ## STATEMENT OF INTENDED USE OF PREDICATE/MARKETED DEVICES The BMI Surgical Staple Marker's intended use is to be applied to soft tissue during open or percutaneous procedures; the staple may be used to radiographically mark the surgical location. ## STATEMENT OF COMPARISON OF TECHNOLOGIC CHARACTERISTICS BETWEEN DEVICE AND PREDICATE DEVICE The design, construction, materials, nominal specifications are identical to the marketed predicate device. The devices consist of a non absorbable material compatible with X-ray, i.e., clearly visible on a radiograph; the staple/markers are deployed with manual appliers. 510(k) Notification Biopsys Medical, Inc. March 5, 1997 CONFIDENTIAL Page 29 {1} HUMAN SERVICES DEPARTMENT OF HEALTH & HUMAN SERVICES Public Health Service Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 SEP 11 1997 Ms. Irene Parker, R.N., M.B.A. Director, Medical Affairs Biopsys Medical, Inc. 3 Morgan Irvine, California 92618 Re: K970817 Trade Name: MicroMark™ Clip Regulatory Class: II Product Code: GDW Dated: June 18, 1997 Received: June 19, 1997 Dear Ms. Parker: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. {2} Page 2 - Ms. Irene Parker, R.N., M.B.A. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for *in vitro* diagnostic devices), please contact the Office of Compliance at (301) 594-4595. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, ![img-0.jpeg](img-0.jpeg) Enclosure {3} k970817 510(k) Number (if known): Device Name: MicroMark™ Clip Indications For Use: The MicroMark clip is intended to staple soft breast tissue at the surgical site during an open or percutaneous biopsy procedure and radiographically mark the location. It is indicated for use to radiographically mark breast tissue following an open surgical breast biopsy or percutaneous breast biopsy. Concurrence of CDRH, Office of Device Evaluation (ODE) Prescription Use ☑ Per 21 CFR 801.109 OR Over-The-Counter Use ☐ ![img-1.jpeg](img-1.jpeg) 510(k) Notification Biopsys Medical, Inc. March 5, 1997 CONFIDENTIAL --- **Source:** [https://fda.innolitics.com/submissions/SU/subpart-e%E2%80%94surgical-devices/GDW/K970817](https://fda.innolitics.com/submissions/SU/subpart-e%E2%80%94surgical-devices/GDW/K970817) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com