K133413 · Black Diamond Video · FTA · Jan 7, 2014 · General, Plastic Surgery
Device Facts
Record ID
K133413
Device Name
IDSS SLC
Applicant
Black Diamond Video
Product Code
FTA · General, Plastic Surgery
Decision Date
Jan 7, 2014
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 878.4580
Device Class
Class 2
Indications for Use
IDSS SLC allows the control of surgical lighting during a surgical procedure from the IDSS, which is a centralized interface for voice, video, audio, observational camera and teleconferencing for the operating room.
Device Story
IDSS SLC is an add-on function for the Integrated Operating Room System (IDSS). It provides a centralized touch-screen interface for controlling surgical lighting alongside existing capabilities for routing video, audio, observation cameras, and teleconferencing. Used in the operating room by surgical staff; the device acts as a remote control interface for lighting systems. By consolidating lighting controls into the existing IDSS interface, it simplifies OR equipment management, potentially improving workflow efficiency for the surgical team during procedures.
Clinical Evidence
No clinical data. Bench testing only, including validation of interfaces, feature functional requirements, non-function reliability, and electrical safety testing per EN 60601-1 and EN 60601-1-2:2007.
Technological Characteristics
Centralized touch-screen interface for surgical light control. Integrated into the IDSS system. Electrical safety compliance per EN 60601-1, EN 60601-1-2:2007, and CAN/CSA-C22.2 NO. 601.1.
Indications for Use
Indicated for use in the operating room to control surgical lighting during surgical procedures.
Regulatory Classification
Identification
A surgical lamp (including a fixture) is a device intended to be used to provide visible illumination of the surgical field or the patient.
Special Controls
*Classification.* Class II (special controls). The device, when it is an operating room lamp, a surgical instrument light, a surgical floor standing light, an endoscopic surgical light, a surgical light connector, a ceiling mounted surgical light, a surgical light carrier, surgical light accessories, a surgical lamp, a remote illuminator, or an incandescent surgical lamp, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 878.9.
{0}------------------------------------------------
Image /page/0/Picture/0 description: The image shows the logo for Black Diamond Video. The logo consists of the letters "BDV" in a bold, sans-serif font, with the words "BLACK DIAMOND VIDEO" printed in a smaller font underneath. To the left of the letters is a diamond shape made up of smaller diamonds. The logo is black and white.
- 510(K) Summary
Date Prepared: 10/17/2013
K133413 Page 1 of 2 JAN - 7 2014
, ''·
i
| 510K Owner: | Black Diamond Video |
|-------------|-------------------------------|
| | 503 Canal Blvd |
| | Richmond, CA94804 |
| Contact: | Ragunath Muniandy |
| | Regulatory Affairs Specialist |
| Trade Name: | IDSS SLC |
|-----------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Common Name: | Surgical Light Control |
| Classification Name: | Light, Surgical Accessories |
| Classification Panel: | General and Plastic Surgery |
| CFR section: | 21 CFR 878.4580 |
| Class: | 2 |
| Product Code: | FTA |
| Predicate Device: | Easy Suite Surgical Light Control (K102791)<br>OASYS Surgical Light Controller (K112133) |
| Device Description: | IDSS SLC is an additional function of the IDSS, which is an<br>integrated operating room system that controls video displays,<br>observation cameras, audio video equipment, teleconferencing<br>and the routing of videos and images from multiple sources to<br>multiple destination via touch screen interface. |
… 2017/06/2017 11:00:00 PM 11/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017 11:00 10/08/2017
{1}------------------------------------------------
Image /page/1/Picture/0 description: The image shows the logo for Black Diamond Video, which includes a diamond shape made up of smaller diamonds on the left side of the image. To the right of the diamond shape, the letters "BDV" are written in a bold, sans-serif font. Below the letters, the words "BLACK DIAMOND VIDEO" are written in a smaller, sans-serif font. The logo is black and white.
K133413
Page 2 of 2
Indications for use: IDSS SLC allows the control of surgical lighting during a surgical procedure from the IDSS, which is a centralized interface for voice, video, audio, observational camera and teleconferencing for the operating room.
## Substantial Equivalence
(SE) Rational: The IDSS SLC is substantially equivalent to predicate devices since intended use, operational principle, basic technology and design are similar. The minor differences between the IDSS SLC and predicate devices raise no new issues of safety and effectiveness, as these differences have no effect on the performance, function or general intended of use of the device. Therefore based on the applicable testing and the equivalence information presented in this submission, Black Diamond Video believes that IDSS SLC does not raise any new safety or efficacy issues.
## Summary of Nonclinical
Testing:
- Validation testing performed on interfaces, feature functional requirements, and non-function reliability. - Electrical safety testing per EN 60601-1 and EN 60601-1-2:2007
| Summary of Safety<br>and Effectiveness: | Testing and evaluation indicate that the system meets the needs<br>of the users of the device and does not raise any new safety and<br>efficacy of the predicate device. The IDSS conforms to the<br>EN 60601-1 “Medical Electrical Equipment- Part 1-2 General<br>requirement for safety.<br>EN 60601-1-2:2007 “Medical Electrical Equipment- Part 1-2<br>General requirement for safety- Collateral Standard:<br>Electromagnetic compatibility- requirement and test.<br>CAN/CSA-C22.2 NO. 601.1 -Medical Electrical Equipment<br>Part 1, General Requirements for Safety, Adopted IEC601-1<br>2ed(90) |
|-----------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|-----------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
{2}------------------------------------------------
Image /page/2/Picture/0 description: The image shows the text "DEPARTMENT OF HEALTH & HUMAN SERVICES" in bold, uppercase letters. The text is centered and appears to be the heading of a document or official communication. The font is a sans-serif typeface, and the text is black against a white background.
Public Health Service
Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002
Black Diamond Video Incorporated Ragunath Muniandy Regulatory Affairs Specialist 503 Canal Boulevard Richmond, California 94804
January 7, 2014
Re: K133413
Trade/Device Name: IDSS SLC Regulation Number: 21 CFR 878.4580 Regulation Name: Surgical lamp Regulatory Class: Class II Product Code: FTA Dated: October 17, 2013 Received: November 7, 2013
Dear Muniandy:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you; however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set
{3}------------------------------------------------
Page 2 - Ragunath Muniandy
forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Small Manufacturers, International and Consumer Assistance at its tollfree number (800) 638-2041 or (301) 796-7100 or at its Internet address
http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to
http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.goy/MedicalDevices/Resourcesfor You/Industry/default.htm.
Sincerely yours,
## Joshua C. Nipper -S
Binita S. Ashar, M.D., M.B.A., F.A.C.S. Acting Director For Division of Surgical Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{4}------------------------------------------------
Indications for Use
510(k) Number (if known): K1333413
Device Name: IDSS SLC
Indications For Use:
IDSS SLC allows the control of surgical lighting during a surgical procedure from the IDSS, which is a centralized interface for voice, video, audio, observational camera and teleconferencing for the operating room.
Over-The-Counter Use Prescription Use __ × AND/OR (Part 21 CFR 801 Subpart D) (21 CFR 801 Subpart C)
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED)
## Concurrence of CDRH, Office of Device Evaluation (ODE)
| DSD-DIVISION SIGN-OFF | |
|------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Division of Surgical Devices | |
| 510(k) Number: | K133413 |
| | Long H. Chen -A |
| | Digitally signed by Long H. Chen -A<br>O=U.S. Government,<br>OU=HHS, OU=FDA, OU=People,<br>CN=Long H. Chen -A<br>0.9.2342.19200300.100.1.1=1300369<br>Date: 2014.01.02 14:40:06 -05'00' |
Page __ of _
4-1
Two short videos show you everything — or skip straight to the written tutorial if you'd rather read. You can reopen this any time from the Tutorial button in the top bar.
Part 1 — Search, results, and everyday workflows 16 min
Part 2 — Embeddings: the galaxy map 3 min
1. Search: exact and fuzzy
Type a phrase like "coronary artery calcification" into the search box. You get two kinds of results. Exact results match the literal phrase — prefix searches work ("coronary artery calcificati") but suffix searches do not. Fuzzy results match on the meaning and intent of your phrase rather than the exact words, and are sorted by relevance score. Hover over the Exact or Fuzzy badge on any row to see exactly why it matched.
Use the checkboxes above the results to narrow: SaMD keeps only software-only devices, AI / ML keeps only devices with AI.
Exact vs. fuzzy search: what's the difference?
Exact matches on the literal phrase (prefix search works, suffix does not). Fuzzy matches on the meaning and intent of the phrase rather than the exact words. Hover over the badge on any row to see why it matched.
You search "coronary artery calcification" and want only software devices with AI. What two filters do you apply?
Narrow by SaMD (software-only devices), then narrow by AI/ML (devices with AI).
2. The results table
Scroll right in the results table. The intended use is extracted for you — no need to open the PDF. The device story gives a high-level snapshot of what the device does and how it's used. The AI Performance sub-table shows each output name, acceptance criteria, observed values, and development/test dataset descriptions — the same format Innolitics uses for regulatory strategy outputs, and the fastest high-level fingerprint of an AI device. It is AI-generated but has been very reliable in practice.
Where do you find a device's intended use without opening the PDF?
Scroll right in the search results table. The intended use column is extracted for you; no need to dig into the 510(k) summary PDF.
What does the AI Performance sub-table show, and why is it useful?
Output name, acceptance criteria, observed values, development dataset description, and test dataset description. It's the same format we use for regulatory strategy output and Fast 510(k) input, and the fastest high-level fingerprint of an AI device. AI-generated but reliable in practice.
3. Judging fuzzy relevance
Fuzzy results trail off in relevance as you scroll. Use three signals to decide how far down to go: the fuzzy badge explanations, the intended use column, and whether your target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, you're past the relevant zone. A top hit with a low score (~0.4) and a stretched explanation is a hint the closest predicates are far away — the project may be headed for De Novo. Note the fuzzy search is a pattern match: it doesn't handle negation ("not") well, and hardware devices can appear — filter by SaMD/AI ML to cut them.
How do you judge how far down fuzzy search results to go?
Use the relevancy signals: the fuzzy badge explanations, the intended use column, and whether the target output (e.g., Cobb angle) still appears in the AI Performance sub-table. Once it stops appearing, results are trailing off in relevancy.
4. Device detail page: chat and citations
Click a device name to open its detail page: device facts on the left, a chat window on the right. Ask something like "Describe the training data". The answer carries little citation bubbles — click one to jump to the highlighted passage in the source PDF, so you can verify every AI answer against the document. There's also a Download PDF button for sharing.
How do you verify an AI chat answer on the device detail page?
Click the citation bubbles to jump to the relevant highlight in the source document.
Reading rule for every project: how many summaries do you read in full?
At least the three most relevant 510(k) or De Novo summaries, in full. After that, use targeted chat questions to confirm your memory quickly. The tool supports this professional habit — it doesn't replace it.
5. Side-by-side comparison
Select multiple rows in the results table (aim for under ~10), then open the PDF Viewer tab. Ask one question — it goes to all selected devices in parallel, each with citations. This is the fastest way to compare and contrast devices: training data, PCCP scope, how they handled adding new scanners, and so on.
What does the side-by-side PDF viewer mode do?
Select multiple devices, open the PDF viewer tab, and ask one question (e.g., "Describe the training data"). It queries all selected devices simultaneously with citations, so you can compare and contrast quickly.
6. Collections
With rows selected, go to the Collections tab and create a labeled collection (e.g., "Cobb Angle Project"). Reload that selection any time — before a client call, pull up the collection and ask questions across all of its devices at once.
How do you save a set of selected devices for later use?
Select the rows, go to the Collections tab, and create a labeled collection (e.g., "Cobb Angle Project"). You can reload the selection anytime and carry it into the PDF viewer and other tabs that support selections.
7. Product codes and the regulations tree
Click a product code in the results to jump to it in the regulations tree — identification text, sibling product codes, and devices you can open in a PDF viewer on the right. Click a regulation number to see its identification, special controls, and related product codes. You can also search by product code or regulation number at the top of the tree. Always read the special controls if any exist for your device — it broadens your search and sharpens pre-kickoff research.
What can you do from the regulations tree view?
Browse product codes and regulation numbers, read the identification text and special controls, browse sibling product codes, open device PDFs on the right, and search by product code or regulation number at the top of the tree.
8. Chart view
Click Show Chart and segment by regulation number (or product code) to see which regulations dominate your result set. Clicking a regulation takes you into the regulations tree. Great for spotting that most matches are, say, hardware laparoscopic devices — a cue to go back and filter.
How do you see which regulations dominate a search result set?
Click "Show Chart" and segment by Regulation Number. Clicking a regulation takes you to the regulations tree.
9. The predicate graph
Open the Predicates tab for a family-tree view of predicate relationships. Click a node to trace its parents and children; selections from search carry over pre-selected. Commonly predicated devices are worth reading — a lot of people predicated them for a reason. The visual lineage is also handy on client calls, e.g. to show how a predicate family evolved and justify why your predicate still holds.
In the predicate graph, why are commonly predicated devices worth reading?
A lot of people predicated them for a reason. Clicking a node traces parents and children, and selections from search carry over pre-selected.
10. Embeddings: the galaxy map
The Embeddings tab plots every matching document in a 2-D "galaxy map" where semantically similar devices cluster together. Hover or click clusters to explore, and let AI label the clusters for you. Embeddings beat product codes for grouping: two devices can carry different product codes (LLZ vs. QIH) yet do the same thing — the embedding captures the meaning of the intended use and device story. This is also exactly how retrieval-augmented generation (RAG) works under the hood, and it makes a great visual on client calls.
Try it yourself
Head to the search page and work through a few of these AI/ML fuzzy searches to build intuition: perivascular fat on CT · aortic valve calcification opportunistic screening on noncontrast CT · breast cancer prediction on digital pathology slides · autism detection · gestational age prediction · a hearing aid that can also detect a pulse · foundation model based analysis of ECG · large language models · penetration test. Watch how the relevance scores, intended use, and AI Performance tables tell you when results stop being meaningful.