BARCO MEDIS 2MP1NT MEDICAL DIAGNOSTIC DISPLAY SYSTEM

K022773 · Barco N.V. · LLZ · Dec 13, 2002 · Radiology

Device Facts

• Record ID: K022773
• Device Name: BARCO MEDIS 2MP1NT MEDICAL DIAGNOSTIC DISPLAY SYSTEM
• Applicant: Barco N.V.
• Product Code: LLZ · Radiology
• Decision Date: Dec 13, 2002
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 892.2050
• Device Class: Class 2

Intended Use

The Barco MeDis 2MP1NT Medical Diagnostic Display System is intended to be used in displaying and viewing digital images for review by trained medical practitioners.

Device Story

The MeDis 2MP1NT is a digital image display system designed for medical diagnostic environments. It functions as a high-resolution monitor for the visualization of digital medical images. Operated by trained medical practitioners, the device allows for the review and analysis of clinical imagery. By providing high-resolution output, it assists clinicians in interpreting diagnostic data, thereby supporting clinical decision-making and patient care.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Digital image display system consisting of components for high-resolution visualization of digital images. Specific materials, energy sources, and software architecture details are not provided in the document.

Indications for Use

Indicated for the display and viewing of digital images for review and analysis by trained medical practitioners.

Regulatory Classification

Identification

A medical image management and processing system is a device that provides one or more capabilities relating to the review and digital processing of medical images for the purposes of interpretation by a trained practitioner of disease detection, diagnosis, or patient management. The software components may provide advanced or complex image processing functions for image manipulation, enhancement, or quantification that are intended for use in the interpretation and analysis of medical images. Advanced image manipulation functions may include image segmentation, multimodality image registration, or 3D visualization. Complex quantitative functions may include semi-automated measurements or time-series measurements.

Special Controls

*Classification.* Class II (special controls; voluntary standards—Digital Imaging and Communications in Medicine (DICOM) Std., Joint Photographic Experts Group (JPEG) Std., Society of Motion Picture and Television Engineers (SMPTE) Test Pattern).

Predicate Devices

• Barco NV Display Systems MeDis 2MP2 Dual-Head Medical Diagnostic Display System (K001747)

Submission Summary (Full Text)

{0}------------------------------------------------

# 510(K) SUMMARY

# ん 022773

| Manufacturer: | Barco NV Barcoview<br>Theodoor Sevenslaan 106<br>8500 Kortrijk<br>Belgium |
|--------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Submitted By: | Ferguson Medical<br>Consultant to Barco NV |
| Contact Information: | Phone: [phone]<br>FAX: [phone] |
| Classification Name: | System, image processing |
| Common/Usual Name: | Image display system, medical image<br>workstation, image monitor/display, and others |
| Proprietary Name: | Barco MeDis 2MP1NT Medical Diagnostic<br>Display System |
| Classification Number: | 21 CFR 892.2050/Procode 90LLZ |
| Substantial Equivalence: | Barco NV Display Systems MeDis 2MP2 Dual-<br>Head Medical Diagnostic Display System<br>(K001747) |
| Device Description: | The MeDis 2MP1NT device is a digital image<br>display system |
| Intended Use: | The Barco MeDis 2MP1NT Medical Diagnostic<br>Display System is intended to be used in<br>displaying and viewing digital images for<br>review by trained medical practitioners. |
| Technological Characteristics: | The Barco MeDis 2MP1NT device consists of<br>components to provide high resolution<br>visualization of digital images. |

in the

{1}------------------------------------------------

# DEPARTMENT OF HEALTH & HUMAN SERVICES

Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo is circular and contains the words "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" around the perimeter. In the center of the circle is an abstract symbol that resembles a stylized caduceus or a human figure with outstretched arms.

### Public Health Service

od and Drug Administra 9200 Corporate Boulevard Rockville MD 20850

Barco NV Display Systems % Mr. Frank Ferguson Official Correspondent Ferguson Medical P.O. Box 12038 LA JOLLA CA 92039-2038

## Re: K022773

Trade/Device Name: MeDis 2MP1NT Regulation Number: 21 CFR 892.2050 Regulation Name: Picture archiving and

communications system

Regulatory Class: II Product Code: 90 LLZ Dated: October 30, 2002 Received: November 4, 2002

## Dear Mr. Ferguson:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (sections 531-542 of the Act); 21 CFR 1000-1050.

{2}------------------------------------------------

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at one of the following numbers, based on the regulation number at the top of this letter:

| 8xx.1xxx | (301) 594-459 |
|----------------------------------|---------------|
| 876.2xxx, 3xxx, 4xxx, 5xxx | (301) 594-461 |
| 884.2xxx, 3xxx, 4xxx, 5xxx, 6xxx | (301) 594-461 |
| 892.2xxx, 3xxx, 4xxx, 5xxx | (301) 594-465 |
| Other | (301) 594-469 |

Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html.

Sincerely yours,

Nancy C. Snogdin

Nancy C. Progdon Director, Division of Reproductive, Abdominal, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{3}------------------------------------------------

Page 1 of 1

510(k) Number (If known): Kolz

Device Name: MeDis 2MP1NT

Indications For Use:

. . .

The MeDis 2MP1NT Medical Diagnostic Display System is intended to be used in displaying and viewing digital images for review and analysis by trained practitioners.

# PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED

Concurrence of CDRH, Office of Device Evaluation (ODE)

David G. Legron

Prescription Use XX (Per 21 CFR 801.109)

OR

Over-The- Counter Use ________________________________________________________________________________________________________________________________________________________