Suture Wires and Wire Loops

K150889 · Zimmer, Inc. · JDQ · Jul 1, 2015 · Orthopedic

Device Facts

• Record ID: K150889
• Device Name: Suture Wires and Wire Loops
• Applicant: Zimmer, Inc.
• Product Code: JDQ · Orthopedic
• Decision Date: Jul 1, 2015
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 888.3010
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Suture wires and wire loops are indicated for use for bone fracture fixation, osteotomy, arthrodesis, correction of deformity, revision procedures where other treatments or devices have been unsuccessful, and bone reconstruction procedures.

Device Story

Suture wires and wire loops are orthopedic implants used for bone fracture fixation during the healing process. Available in multiple diameters and lengths; used by surgeons in clinical settings to stabilize bone segments. The device provides mechanical support to bone structures; clinical benefit includes stabilization of fractures or osteotomies to facilitate healing. No software or electronic components involved.

Clinical Evidence

No clinical data provided. Substantial equivalence supported by non-clinical performance data, including biocompatibility testing per ISO 10993-1 and engineering analysis of bending strength.

Technological Characteristics

Bone fixation cerclage wires and loops. Materials tested for biocompatibility per ISO 10993-1. Mechanical performance evaluated via bending strength analysis. No software, electronics, or energy sources.

Indications for Use

Indicated for patients requiring bone fracture fixation, osteotomy, arthrodesis, deformity correction, revision procedures, or bone reconstruction.

Regulatory Classification

Identification

A bone fixation cerclage is a device intended to be implanted that is made of alloys, such as cobalt-chromium-molybdenum, and that consists of a metallic ribbon or flat sheet or a wire. The device is wrapped around the shaft of a long bone, anchored to the bone with wire or screws, and used in the fixation of fractures.

Predicate Devices

• Ortho Solutions Limited, Ortho Solutions Trauma Implants for Osteosynthesis, Cerclage Wires (K110895)

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features the department's name in a circular arrangement around a stylized graphic. The graphic depicts a human figure in profile, with three overlapping faces suggesting a sense of community and support. The words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" are clearly visible in the logo.

Food and Drug Administration 10903 New Hampshire Avenue Document Control Center - WO66-G609 Silver Spring, MD 20993-0002

July 1, 2015

Zimmer, Incorporated Dorothy Snyder Associate Director, Regulatory Affairs P.O. Box 708 Warsaw, Indiana 46581

Re: K150889

Trade/Device Name: Suture Wires and Wire Loops Regulation Number: 21 CFR 888.3010 Regulation Name: Bone fixation cerclage Regulatory Class: Class II Product Code: JDQ Dated: May 26, 2015 Received: May 28, 2015

Dear Ms. Snyder:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug. and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set

{1}------------------------------------------------

forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Division of Industry and Consumer Education at its toll-free number [phone] or [phone] or at its Internet address

http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to

http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.

You may obtain other general information on your responsibilities under the Act from the Division of Industry and Consumer Education at its toll-free number [phone] or [phone] or at its Internet address

http://www.fda.gov/MedicalDevices/ResourcesforYou/Industry/default.htm.

Sincerely yours,

# Lori A. Wiggins -S

for Mark N. Melkerson Director Division of Orthopedic Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

## Indications for Use

510(k) Number (if known)

K150889

Device Name Suture Wires and Wire Loops

#### Indications for Use (Describe)

Suture wires and wire loops are indicated for use for bone fracture fixation, osteotomy, arthrodesis, correction of deformity, revision procedures where other treatments or devices have been unsuccessful, and bone reconstruction procedures.

Type of Use (Select one or both, as applicable)

| <div> <span> <span style="font-size: 16px;">☑</span> Prescription Use (Part 21 CFR 801 Subpart D) </span> </div> |
|----------------------------------------------------------------------------------------------------------------------|
| <div> <span> <span style="font-size: 16px;">☐</span> Over-The-Counter Use (21 CFR 801 Subpart C) </span> </div> |

### CONTINUE ON A SEPARATE PAGE IF NEEDED.

This section applies only to requirements of the Paperwork Reduction Act of 1995.

### *DO NOT SEND YOUR COMPLETED FORM TO THE PRA STAFF EMAIL ADDRESS BELOW.*

The burden time for this collection of information is estimated to average 79 hours per response, including the time to review instructions, search existing data sources, gather and maintain the data needed and complete and review the collection of information. Send comments regarding this burden estimate or any other aspect of this information collection, including suggestions for reducing this burden, to:

> Department of Health and Human Services Food and Drug Administration Office of Chief Information Officer Paperwork Reduction Act (PRA) Staff [e-mail]

"An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB number."

{3}------------------------------------------------

Image /page/3/Picture/0 description: The image shows the logo for Zimmer Biomet. The logo features a large, stylized letter "Z" in a blue circle. Below the circle, the word "zimmer" is written in lowercase letters, also in blue. The font used for "zimmer" is sans-serif and appears to be a custom design.

## 510(k) Summary

| Sponsor: | Zimmer. Inc.<br>P.O. Box 708<br>Warsaw, IN 46581-0708 |
|-----------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| Contact Person: | Dorothy A. Snyder<br>Associate Director, Regulatory Affairs<br>Telephone: [phone]<br>Fax: [phone] |
| Date: | March 23, 2015 |
| Trade Name: | Suture Wires and Wire Loops |
| Common Name: | Suture Wires and Wire Loops |
| Classification Names<br>and References: | Cerclage, fixation (JDQ) per 21 § CFR 888.3010, Bone<br>fixation cerclage |
| Classification Panel: | Orthopedics/87 |
| Predicate Device(s): | Ortho Solutions Limited, Ortho Solutions Trauma<br>Implants for Osteosynthesis, Cerclage Wires (K110895 -<br>cleared 12/19/2011) |
| Purpose and Device Description: | Suture wires and wire loops are used for bone fracture<br>fixation during the healing process. These wires are<br>available in multiple diameters and lengths. |
| Intended Use: | Suture wires and wire loops are indicated for use for bone<br>fracture fixation, osteotomy, arthrodesis, correction of<br>deformity, revision procedures where other treatments or<br>devices have been unsuccessful, and bone reconstruction<br>procedures. |
| Comparison to Predicate Device: | The Zimmer suture wires and wire loops are identical in<br>intended use and similar in materials, basic shape and<br>performance characteristics to the predicate devices. |

{4}------------------------------------------------

Performance Data (Nonclinical and/or Clinical):

Non-Clinical Performance and Conclusions:

- . Biocompatibility – Biocompatibility testing on the suture wire and wire loop materials was conducted per ISO 10993-1 and Good Laboratory Practices (21 CFR § 58). All testing passed.
- Performance Evaluation The engineering analysis . shows the bending strength of the subject devices is substantially equivalent to the predicate devices. The evaluation shows the differences in materials, diameter and length between the subject devices and the predicate devices do not affect the clinical strength of the subject suture wires and wire loops.

Conclusions: The data presented in this submission demonstrates that the subject devices are substantially equivalent to the predicate devices.

Clinical Performance and Conclusions:

- Clinical data and conclusions were not needed for . these devices.