MAGLY 6.5MM CANNULATED SCREWS

K021662 · Magly Orthopedics, LLC · HWC · Aug 12, 2002 · Orthopedic

Device Facts

• Record ID: K021662
• Device Name: MAGLY 6.5MM CANNULATED SCREWS
• Applicant: Magly Orthopedics, LLC
• Product Code: HWC · Orthopedic
• Decision Date: Aug 12, 2002
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 888.3040
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Magly 6.5mm Cannulated Screws are generally intended for fracture fixation of large bones and large bone fragments

Device Story

Magly 6.5mm Cannulated Screws are titanium alloy orthopedic fixation devices used for large bone fracture stabilization. The device features a cannulated design for use with a guide wire to ensure precise placement. The distal tip includes 20mm of thread with five cutting flutes for reaming and tapping; the shank includes two reverse cutting flutes to facilitate screw removal. Available in 30mm-150mm lengths in 5mm increments. Used by orthopedic surgeons in clinical or surgical settings to provide mechanical fixation of bone fragments, promoting healing and structural stability.

Clinical Evidence

No clinical data provided; substantial equivalence is based on design, material, and functional similarities to the predicate device.

Technological Characteristics

Titanium alloy construction; cannulated design for guide wire compatibility; 6.5mm nominal major diameter; 20mm distal thread length; five distal cutting flutes; two reverse cutting flutes at thread runout; 30mm-150mm length range.

Indications for Use

Indicated for femoral neck fractures; metaphyseal fractures of distal femur and tibia; tibial plateau fractures; fractures of humerus, olecranon process, scapula, and os calcis; fractures of sacrum, acetabulum, and pelvic ring; fixation of ileo-sacral joint; and fusions of foot and ankle.

Regulatory Classification

Identification

A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.

Predicate Devices

• DePuy/ACE 6.5mm Titanium Cannulated Cancellous Screws

Submission Summary (Full Text)

{0}------------------------------------------------

# AUG 1 2 2002

K021662
page 1 of 1

### 510(k) PREMARKET NOTIFICATION SUMMARY OF SAFETY AND EFFECTIVENESS Maqly 6,5mm Cannulated Screws

## Submission Information

| Name and Address of the Sponsor<br>Of the 510(k) Submission: | Magly Orthopedics, LLC<br>14241 NE Woodinville-Duvall Road, #415<br>Woodinville, Washington 98072<br>425.489.2057 Phone<br>425.482.0147 Fax |
|--------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------|
| Contact Person: | Dave Stinson |
| Date Summary Prepared: | May 17, 2002 |
| Device Identification | |
| Proprietary Name: | Magly 6.5mm Cannulated Screws |
| Common Name: | 6.5 Cannulated Screw |
| Classification: | Screw, Fixation, Bone<br>21 CFR §888.3040 |

#### Predicate Device Identification

The Magly 6.5mm Cannulated Screws are substantially equivalent to that of the predicate DePuy/ACE 6.5mm Titanium Cannulated Cancellous Screws. The Magly 6.5mm Cannulated Screws are similar to the listed predicate device in design, function, materials used, and indications for use.

#### Device Description

Magly 6.5mm Cannulated Screws are of a single thread profile with a nominal major diameter of 6.5mm and can be used in conjunction with a guide wire for precise placement.

At the distal tip the screws will incorporate 20mm of thread and will embody five cutting flutes that are used for reaming and tapping the thread profile. Located at the thread runout to the shank, we placed two reverse cutting flutes, located 180° to each other, to assist in the removal of the screw.

The screws will be available in 5mm incremental lengths, from 30mm-150mm.

Magly 6.5mm Cannulated Screws will be manufactured from titanium alloy

#### Intended Use of the Device

Magly 6.5mm Cannulated Screws are generally intended for fracture fixation of large bones and large bone fragments

> Magly Orthopedics, LLC Magly 6.5mm Cannulated Screws 19

{1}------------------------------------------------

Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of three human profiles facing to the right, stacked on top of each other.

Food and Druq Administration 9200 Corporate Boulevard Rockville MD 20850

AUG 1 2 2002

Mr. Dave Stinson Partner Magly Orthopedics, LLC 14241 NE Woodinville-Duvall Road, #415 Woodinville, Washington 98072

Re: K021662

Trade/Device Name: Magly 6.5mm Cannulated Screws Regulation Number: 888.3040 Regulation Name: Smooth or threaded metallic bone fixation fastener Regulatory Class: II Product Code: HWC Dated: May 17, 2002 Received: May 20, 2002

Dear Mr. Stinson:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

{2}------------------------------------------------

Page 2 - Mr. Dave Stinson

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 21 CFR Part 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html

Sincerely yours.

Sincerely yours,

Mark M. Melleman

Celia M. Witten, Ph.D., M.D. Director Division of General, Restorative and Neurological Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{3}------------------------------------------------

## Statement of Indications for Use

510(k) Number:

Device Name:

Oxllald

Magly 6.5mm Cannulated Screws

Indication(s) for Use:

- · Femoral neck fractures
- Metaphyseal fractures of the distal femur and tibia
- · Fractures of the tibial plateau
- · Fractures of the humerus, olecranon process, scapuls, and os calcis
- · Fractures of the sacrum, acetabulum, and pelvic ring
- · Fixation of the ileo-sacral joint
- · Fusions of the foot and ankle

(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Prescription Use***_*****_ OR Over-the-Counter Use**
(Per 21 CFR 801.109)

(Division-Off)
(Optional Format 1-

(Optional Format 1-2-96)

(Division Sign-Off)
**Division of General, Restorative
and Neurological Devices**

510(k) Number
KV 2166

Magly Orthopedics, LLC Magly 6.5mm Cannulated Screws 12

Page 1 of 1