← Product Code [LPH](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/LPH) · K121308 # HIP SYSTEMS (K121308) _Howmedica Osteonics Corp. · LPH · Jul 30, 2012 · Orthopedic · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/LPH/K121308 ## Device Facts - **Applicant:** Howmedica Osteonics Corp. - **Product Code:** [LPH](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/LPH.md) - **Decision Date:** Jul 30, 2012 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 888.3358 - **Device Class:** Class 2 - **Review Panel:** Orthopedic - **Attributes:** Therapeutic ## Intended Use The hip system devices included in this submission are sterile, single-use devices intended for use in primary and revision total hip arthroplasty to alleviate pain and restore function. ## Device Story Hip system includes femoral heads, acetabular shells, acetabular inserts, modular necks, and modular stems for hip arthroplasty. Devices are sterile, single-use, and implanted by orthopedic surgeons in clinical settings. Components are press-fit or cemented into the proximal femur and acetabulum to replace diseased or damaged joint surfaces, alleviating pain and restoring function. This submission specifically updates labeling to include safety information regarding modular hip stem taper junctions and harmonizes language across Howmedica Osteonics' hip stem labeling. No changes to device design, materials, or operational principles were made; devices remain substantially equivalent to previously cleared systems. ## Clinical Evidence No clinical data provided. This is a labeling-only submission for previously cleared devices. ## Technological Characteristics Modular hip arthroplasty components including femoral heads, acetabular shells, inserts, necks, and stems. Materials include metal, polymer, and ceramic combinations. Designed for cementless (press-fit) or cemented fixation. Sterile, single-use. No software or electronic components. ## Regulatory Identification A hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis is a device intended to be implanted to replace a hip joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across the joint. This generic type of device has a femoral component made of a cobalt-chromium-molybdenum (Co-Cr-Mo) alloy or a titanium-aluminum-vanadium (Ti-6Al-4V) alloy and an acetabular component composed of an ultra-high molecular weight polyethylene articulating bearing surface fixed in a metal shell made of Co-Cr-Mo or Ti-6Al-4V. The femoral stem and acetabular shell have a porous coating made of, in the case of Co-Cr-Mo substrates, beads of the same alloy, and in the case of Ti-6Al-4V substrates, fibers of commercially pure titanium or Ti-6Al-4V alloy. The porous coating has a volume porosity between 30 and 70 percent, an average pore size between 100 and 1,000 microns, interconnecting porosity, and a porous coating thickness between 500 and 1,500 microns. The generic type of device has a design to achieve biological fixation to bone without the use of bone cement. ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ K121308 (pg 1/3) #### 510(k) Summary Hip Systems JUL 30 2012 Proprietary Name: Common Name: Classification Names And References: Artificial Hip Replacement Components -Acetabular and Femoral Hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis21 CFR §888.3358 Hip joint metal/polymer constrained cemented or uncemented prosthesis.21 CFR §888.3310 Hip joint metal/ceramic/polymer semi-constrained cemented or nonporous uncemented prosthesis 21 CFR §888.3353 Hip joint metal/polymer semi-constrained cemented prosthesis 21 CFR \$888.3350 Hip joint femoral (hemi-hip) metallic cemented or uncemented prosthesis 21 CFR 888.3360 Hip joint femoral (hemi-hip) metal/polymer cemented or uncemented prosthesis 21 CFR §888.3390 #### Proposed Regulatory Class: Class II Product Codes: LPH - prosthesis, hip, semi-constrained, metal/polymer, porous uncemented KWZ - prosthesis, hip, constrained, cemented or uncemented, metal/polymer LZO - prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented MEH - prosthesis, hip. semi-constrained. uncemented. metal/polymer, non-porous JDI - prosthesis, hip, semi-constrained, metal/polymer, cemented LWJ - prosthesis, hip, semi-constrained, metal/polymer, uncemented KWL - prosthesis, hip, hemi-, femoral, metal MAY - prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous cemented, osteophilic finish KWY - prosthesis, hip, hemi-, femoral, metal/polymer, cemented or uncemented MBL- prosthesis, hip. semi-constrained, uncemented, metal/polymer, porous {1}------------------------------------------------ K121308 (pg 2/3) For Information contact: Karen Ariemma, RAC Senior Strategic Regulatory Affairs Manager Howmedica Osteonics Corp. 325 Corporate Drive Mahwah. NJ 07430 Phone: (201) 831-5718 Fax: (201) 831-4718 Date Prepared: July 29, 2012 ## Description: The devices included in this submission are femoral heads, acetabular shells, acetabular inserts, modular necks, modular stems and accessory components used in hip arthroplasty procedures. All devices have been previously deemed substantially equivalent in prior 510(k) submissions and are commercially available. The purpose of this submission is to modify the labeling of these devices to include safety information in the Instructions for Use (IFUs) regarding modular hip stem junctions. In addition to this specific update, general revisions have been made to the IFUs to harmonize the language between the Howmedica Osteonics' hip stem labeling #### Intended Use: The hip system devices included in this submission are sterile, single-use devices intended for use in primary and revision total hip arthroplasty to alleviate pain and restore function. ### Indications: The overall indications for use for the subject total and hemi hip replacement prostheses include: - 1. noninflammatory degenerative joint disease including osteoarthritis and avascular necrosis: - 2. rheumatoid arthritis: - correction of functional deformity; 3. - 4. revision procedures where other treatments or devices have failed; and, - 5. treatment of nonunion, femoral neck and trochanteric fractures of the proximal femur with head involvement that are unmanageable using other techniques. The Rejuvenate Hip System is intended for cementless use only. ## Additional indications specific to the Hipstar Stem: The Hipstar Femoral Stem is intended for cementless use only. When mated with a constrained acetabular liner the Hipstar Stem is indicated for use in primary and revision total hip arthroplasty for patients at high risk of hip dislocation due to a history of prior dislocations, bone loss, joint or soft tissue laxity, neuromuscular disease or intraoperative instability. t {2}------------------------------------------------ K121308(pg 3/3) # Additional indications specific to the Restoration Modular Hip System: The Restoration Modular Hip System is intended for primary and revision total hip arthroplasty as well as in the presence of severe proximal bone loss. These femoral stems are designed to be press fit into the proximal femur. ## Substantial Equivalence: The subject hip system devices have been deemed substantially equivalent to other commercially available hip arthroplasty systems based upon an evaluation of intended use, design, materials, and operational principles in prior 510(k) submissions. The purpose of this submission is solely to revise the labeling to add safety information regarding modular hip stem taper junctions. {3}------------------------------------------------ Image /page/3/Picture/1 description: The image shows the seal for the Department of Health & Human Services USA. The seal is circular with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" arranged around the perimeter. In the center of the seal is a stylized symbol that resembles an abstract human figure or a caduceus, with three curved lines representing the body and a single line representing the head. Food and Drug Administration 10903 New Hampshire Avenue Document Control Room -WO66-G609 Silver Spring, MD 20993-0002 JUL 30 2012 Howmedica Osteonics Corp. % Ms. Karen Ariemma Senior Strategic Regulatory Affairs Manager 325 Corporate Drive Mahwah, New Jersey 07430 Re: K121308 Trade/Device Name: Hip Systems Regulation Number: 21 CFR 888.3358 Regulation Name: Hip joint metal/polymer/metal semi-constrained porous-coated uncemented prosthesis Regulatory Class: Class II Regulatory Classi Class Class 22, LZO, MEH, JDI, LWJ, KWL, MAY, KWY, MBL Dated: April 30, 2012 Received: May 1, 2012 Dear Ms. Ariemma: We have reviewed your Section 510(k) premarket notification of intent to market the device we nave reviewed your becamed the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate for use stated in the encrosule) (o regars) to regard) (and in the Medical Device Amendments, or to conninered phor to May 20, 1978, the eccordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). alle Cosment Act (Act) that to nev request to the general controls provisions of the Act. The r ou may, merciole, market the device, occurements for annual registration, listing of general controls provisions of tactice, labeling, and prohibitions against misbranding and devices, good mananataring practices, and evaluate information related to contract liability adulteration. Ticase note: "ODIC assess that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it If your device is classified (See above) into ting major regulations affecting your device can be filly be subject to additional controls. "Enological of the 200 to 898. In addition, FDA may found in the Code of I cacrai resguing your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean Please be advised that FDA s issualled of a bacession with other requirements of the Act that FDA has made a determination that your device complies with other must that FDA has made a determination as administered by other Federal agencies. You must {4}------------------------------------------------ Page 2 – Ms. Karen Ariemma comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical Of it Fart 607); accemes (21 CFR 803); good manufacturing practice requirements as set de rior related davers over (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please 11 Jou atttp://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part note to for questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the I ou may oounn other geficitional and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.lftm. Sincerely yours, Mark N. Melkerson Director Division of Surgical, Orthopedic and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {5}------------------------------------------------ Indications for Use 510(k) Number (if known): K121308 (pg 1/1) Device Name: Stryker Hip Systems Indications for Use: The overall indications for use for the subject total and hemi hip replacement prostheses include: - 1. noninflammatory degenerative joint disease including osteoarthritis and avascular necrosis; - 2. rheumatoid arthritis; - correction of functional deformity; 3. - revision procedures where other treatments or devices have failed; and, 4. - treatment of nonunion, femoral neck and trochanteric fractures of the proximal femur ડ. with head involvement that are unmanageable using other techniques. The Rejuvenate Hip System is intended for cementless use only. # Additional indications specific to the Hipstar Stem: The Hipstar Femoral Stem is intended for cementless use only. When mated with a constrained acetabular liner the Hipstar Stem is indicated for use in primary w len nialed with a combroplasty for patients at high risk of hip dislocation due to a history of prior dislocations, bone loss, joint or soft tissue laxity, neuromuscular disease or intraoperative instability. # Additional indications specific to the Restoration Modular Hip System: The Restoration Modular Hip System is intended for primary and revision total hip arthroplasty as well as in the presence of severe proximal bone loss. These femoral stems are designed to be press fit into the proximal femur. (Division Sign-Oft) Division of Surgical, Orthopedic, and Restorative Devices Over-The-Counter Use X Prescription Use ANDAPO(k) Number LCFR 807 Subpart C) (Part 21 CFR 801 Subpart D) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Page 1 of 1 --- **Source:** [https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/LPH/K121308](https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/LPH/K121308) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com