← Product Code [HTN](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HTN) · K091799 # CABLE READY CABLE GRIP SYSTEM CABLE BUTTON (K091799) _Zimmer, Inc. · HTN · Sep 11, 2009 · Orthopedic · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HTN/K091799 ## Device Facts - **Applicant:** Zimmer, Inc. - **Product Code:** [HTN](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HTN.md) - **Decision Date:** Sep 11, 2009 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 888.3030 - **Device Class:** Class 2 - **Review Panel:** Orthopedic - **Attributes:** Therapeutic ## Intended Use The Cable Button is intended for use in combination with the Zimmer Locking Bone Plating Systems and Cerclage Cables, to stabilize multiple fractures or butterfly fragments in long bones. ## Device Story Cable-Ready Cable Grip System Cable Button is a temporary internal fixation component. Device is threaded into a vacant screw hole of Zimmer Locking Bone Plates to provide a positioning point for a Cerclage Cable. Used in orthopedic surgery to stabilize multiple fractures or butterfly fragments in long bones. Available in Titanium (Ti-6AL-4V Alloy) and Stainless Steel (22-13-5 SST). ## Clinical Evidence No clinical data was required or provided for this device. Substantial equivalence was demonstrated through non-clinical performance testing and engineering analysis. ## Technological Characteristics Materials: Titanium (Ti-6AL-4V Alloy) and Stainless Steel (22-13-5 SST). Form factor: Threaded button component for bone plates. Function: Provides positioning point for cerclage cables in orthopedic fixation. Sterilization: Not specified. ## Regulatory Identification Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system. ## Predicate Devices - Hex Button ([K992617](/device/K992617.md)) - Cerclage Positioning Pin ([K992891](/device/K992891.md)) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ Image /page/0/Picture/0 description: The image shows the logo for Zimmer Biomet. The logo consists of a circle with a stylized "Z" inside it. Below the logo, the word "zimmer" is written in lowercase letters. The image is black and white and appears to be a digital rendering. ## SEP 1 1 2009 P.O. Box 708 Warsaw, IN 46581-0708 574 267-6131 KO91799 ### Summary of Safety and Effectiveness Sponsor: Contact Person: Date: Trade Name: Common Name: Classification Name and Reference: Predicate Device: Device Description: Intended Use: Comparison to Predicate Device: Zimmer. Inc. P.O. Box 708 Warsaw, IN 46581-0708 Anthony Francalancia, RAC Senior Associate, Regulatory Affairs Telephone: (574) 372-4570 Fax: (574) 372-4605 September 9, 2009 Cable Ready® Cable Grip System Cable Button Washer, Bolt, Nut, Orthopedic HTN - Washer, Bolt, Nut, Orthopedic 21 CFR § 888.3030 Hex Button, manufactured by Pioneer Laboratories, K992617, cleared October 27, 1999. Cerclage Positioning Pin, manufactured by Synthes, K992891, cleared November 2, 1999. The Cable-Ready Cable Grip System Cable Button is a temporary internal fixation component used in conjunction with Zimmer Locking Bone Plates and Cerclage Cables. The Cable Button is threaded into a vacant screw hole of Zimmer Locking Bone Plates and provides a positioning point for a Cerclage Cable. The Cable Button is available in Titanium (Ti-6AL-4V Alloy) and Stainless Steel (22-13-5 SST). The Cable Button is intended for use in combination with the Zimmer Locking Bone Plating Systems and Cerclage Cables, to stabilize multiple fractures or butterfly fragments in long bones. The proposed devices, like the predicates, are used in conjunction with bone plates and cerclage devices to provide a positioning point for the 10 {1}------------------------------------------------ K091799 Page 2 September 9, 2009 Performance Data (Nonclinical and/or Clinical): cerclage device. The proposed devices are made of similar materials (Stainless Steel and Titanium Alloy) as the predicates. Non-Clinical Performance and Conclusions: Testing and Engineering Analysis demonstrates that the proposed devices meet performance requirements. Clinical Performance and Conclusions: Clinical data and conclusions were not needed for these devices. {2}------------------------------------------------ ### DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" around the perimeter. Inside the circle is a stylized symbol that resembles an abstract human figure or a bird-like shape. Food and Drug Administration 10903 New Hampshire Avenue Document Mail Center - WO66-G609 Silver Spring, MD 20993-0002 # SEP 1 1 2009 Zimmer, Inc. % Anthony Francalancia, RAC Senior Associate, Regulatory Affairs P.O. Box 708 Warsaw. Indiana 46581-0708 Re: K091799 Trade/Device Name: Cable Ready® Cable Grip System Cable Button Regulation Number: 21 CFR 888.3030 Regulation Name: Single/multiple component metallic bone fixation appliances and accessories Regulatory Class: Class II Product Code: HTN Dated: August 19, 2009 Received: August 20, 2009 Dear Mr. Francalancia: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA), You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical) device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set {3}------------------------------------------------ ### Page 2 - Anthony Francalancia, RAC forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), plcase go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Sincerely yours, Carbare Buehl Mark N. Melkers Director Division of Surgical, Orthopedic and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ ## Indications for Use ## 510(k) Number (if known): K091799 #### Device Name: Cable-Ready® Cable Grip System Cable Button ### Indications for Use: The Cable Button is intended for use in combination with the Zimmer Locking Bone Plating Systems and Cerclage Cables, to stabilize multiple fractures or butterfly fragments in long bones. Prescription Use _ X (Part 21 CFR 801 Subpart D) #### AND/OR Over-The-Counter Use (21 CFR 807 Subpart C) (Please do not write below this line - Continue on another page if needed) Concurrence of CDRH, Office of Device Evaluation (ODE) Jonita 2 for mxn (Division Size: 262 vision of Surgical, Orthopedic, Restorative Devices \$10(k) Number K091799 Page 1 of 1 9 --- **Source:** [https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HTN/K091799](https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HTN/K091799) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com