← Product Code [HRS](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HRS) · K122005 # MAXLOCK EXTREME SYSTEM (K122005) _Orthohelix Surgical Designs, Inc. · HRS · Sep 6, 2012 · Orthopedic · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HRS/K122005 ## Device Facts - **Applicant:** Orthohelix Surgical Designs, Inc. - **Product Code:** [HRS](/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HRS.md) - **Decision Date:** Sep 6, 2012 - **Decision:** SESE - **Submission Type:** Special - **Regulation:** 21 CFR 888.3030 - **Device Class:** Class 2 - **Review Panel:** Orthopedic - **Attributes:** Therapeutic, Pediatric ## Intended Use The MaxLock Extreme System is indicated for the following: •The MaxLock Extreme Universal Module is indicated for use in adult or pediatric patients as indicated for pelvic, small and long bone fracture fixation of bones that have been surgically prepared (osteotomy) for correction of deformity or arthrodesis. Indications for use include internal fixation of the tibia, fibula, femur, humerus, ulna, radius, and bones in the hand, wrist, foot and ankle. • The MaxLock Extreme Clavicle Module is indicated for fractures, fusions and osteotomies of the clavicle and bones in the hand, wrist, foot and ankle. •The MaxLock Extreme Foot Module is indicated for fractures, fusions and osteotomies of bones in the hand, wrist, foot and ankle in pediatric and adult patients. •The MaxLock Extreme Distal Radius Module is indicated for fractures and osteotomies of the distal radius in adult patients. ## Device Story MaxLock Extreme System comprises metallic bone plates and screws for internal fixation; stabilizes fractures; aids fusion/repair of bone fragments; facilitates osteotomy correction. Used in orthopedic surgery; implanted by surgeons. Components manufactured from titanium alloy or PEEK. System modules include Universal, Clavicle, Foot, and Distal Radius configurations. Provides mechanical stabilization to bone segments to promote healing and structural alignment. ## Clinical Evidence Bench testing only. Finite element analysis performed to compare strength between subject and predicate devices. ## Technological Characteristics Metallic bone fixation plates and screws. Materials: Titanium alloy, PEEK. Mechanical fixation principle. Dimensions vary by module (Universal, Clavicle, Foot, Distal Radius). ## Regulatory Identification Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system. ## Predicate Devices - MaxLock Extreme® System ([K113048](/device/K113048.md)) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ # K122005 #### SEP 6 2012 li ### 510(k) SUMMARY ### Submitter Information : | Submitter's Name: | OrthoHelix Surgical Designs, Inc. | |------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Address: | 1065 Medina Rd, Suite 500 | | | Medina, Ohio 44256 | | Telephone Number: | 330-869-9562 | | Fax Number: | 330-247-1598 | | Prepared By: | Andy Leither | | Contact Person: | Derek Lewis | | Date Prepared: | 7/6/12 | | Device Information | | | Trade Name: | MaxLock Extreme® System | | Common Name: | Plates/Screws | | Classification Name: | Plate, Fixation, Bone and Screw, Fixation, Bone | | Device Classification: | Single/multiple component metallic bone fixation appliances (Class II
per 21 CFR 888.3030 and 888.3040)
Panel: Orthopedic, Product Code: HRS/HWC | | Predicate Device: | The MaxLock Extreme® System is equivalent to current legally
marketed devices. | | Material Composition: | Titanium Alloy, PEEK | | Device Description: | The MaxLock Extreme® System consists of various size plates and
screws used to stabilize and aid in the fusion or repair of fractured
bones and bone fragments. The plates are offered in different lengths
and sizes. The screws are offered in different diameters and lengths.
All implantable components are manufactured from implant grade
titanium alloy or PEEK | | Indications for Use: | The MaxLock Extreme® System plates and screws are indicated for the
following:
• The MaxLock Extreme® Universal Module is indicated for use in
adult or pediatric patients as indicated for pelvic, small and long
bone fracture fixation and fixation of bones that have been
surgically prepared (osteotomy) for correction of deformity or
arthrodesis. Indications for use include internal fixation of the tibia,
fibula, femur, humerus, ulna, radius, and bones in the hand, wrist,
foot and ankle.
• The MaxLock Extreme® Clavicle Module is indicated for fractures,
fusions and osteotomies of the clavicle and bones in the hand,
wrist, foot and ankle.
• The MaxLock Extreme® Foot Module is indicated for fractures,
fusions and osteotomies of bones in the hand, wrist, foot and ankle
in pediatric and adult patients. | {1}------------------------------------------------ - The MaxLock Extreme® Distal Radius Module is indicated for fractures and osteotomies of the distal radius in adult patients. The new MaxLock Extreme® System is substantially equivalent to the existing OrthoHelix MaxLock Extreme® System (K113048). Finite element analysis comparing the strength of the subject and predicate devices was performed and the results support substantial equivalence. Due to similarities in indications, design, and materials, no other testing was required. No new issues of safety and effectiveness have been raised.. Substantial Equivalence: {2}------------------------------------------------ #### DEPARTMENT OF HEALTH & HUMAN SERVICES Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a symbol to the right and text to the left. The symbol is a stylized representation of a human figure embracing a globe. The text reads "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" in a circular arrangement. #### Public Health Service Food and Drug Administration 10903 New Hampshire Avenue Document Control Room-WO66-G609 Silver Spring, MD 20993-0002 OrthoHelix Surgical Designs, Incorporated % Mr. Derek Lewis Vice President of Research and Development 1065 Medina Road, Suite 500 Medina, OH 44256 Re: K122005 Trade/Device Name: MaxLock Extreme® System Regulation Number: 21 CFR 888.3030 Regulation Name: Single/multiple component metallic bone fixation appliances Regulatory Class: Class II Product Code: HRS, HWC Dated: August 9, 2012 Received: August 15, 2012 Dear Mr. Lewis: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set SEP : 6 2012 {3}------------------------------------------------ #### Page 2 - Mr. Derek Lewis forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportalProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance. You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm. Sincerely vours Mark N. Melkerson Director Division of Surgical, Orthopedic and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ ## Indications for Use 510(k) Number (if known): K122005 Device Name: MaxLock Extreme® System Indications For Use: The MaxLock Extreme System is indicated for the following: - •The MaxLock Extreme Universal Module is indicated for use in adult or pediatric patients as indicated for pelvic, small and long bone fracture fixation of bones that have been surgically prepared (osteotomy) for correction of deformity or arthrodesis. Indications for use include internal fixation of the tibia, fibula, femur, humerus, ulna, radius, and bones in the hand, wrist, foot and ankle. - · The MaxLock Extreme Clavicle Module is indicated for fractures, fusions and osteotomies of the clavicle and bones in the hand, wrist, foot and ankle. - ·The MaxLock Extreme Foot Module is indicated for fractures, fusions and osteotomies of bones in the hand, wrist, foot and ankle in pediatric and adult patients. - ·The MaxLock Extreme Distal Radius Module is indicated for fractures and osteotomies of the distal radius in adult patients. × Prescription Use (Part 21 CFR 801 Subpart D) AND/OR Over-The-Counter Use (21 CFR 801 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) (Division Sign-Off) Division of Surgical, Orthopedic, and Restorative Devices Page 1 of 1 510(k) Number k122005 --- **Source:** [https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HRS/K122005](https://fda.innolitics.com/submissions/OR/subpart-d%E2%80%94prosthetic-devices/HRS/K122005) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com