PVP, POLYVINYLPYRROLIDONE 10% (W/V) IN HEPES-HTF

K991391 · Advanced Reproductive Technologies · MQL · Jan 10, 2000 · Obstetrics/Gynecology

Device Facts

• Record ID: K991391
• Device Name: PVP, POLYVINYLPYRROLIDONE 10% (W/V) IN HEPES-HTF
• Applicant: Advanced Reproductive Technologies
• Product Code: MQL · Obstetrics/Gynecology
• Decision Date: Jan 10, 2000
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 884.6180
• Device Class: Class 2

Intended Use

PVP is used for the intracytoplasmic sperm injection (ICSI) procedure to decrease the motility of spermatozoa, prevent their sticking to the injection pipette during the procedure and to give more control over the flow of fluid in the ICSI needle.

Device Story

PVP (10% w/v in Hepes-HTF) is a tissue culture media additive used during intracytoplasmic sperm injection (ICSI). The solution increases fluid viscosity, which slows sperm motility and prevents spermatozoa from adhering to the glass injection pipette. This allows the embryologist greater control over fluid flow and sperm manipulation during the microinjection process. The device is used in clinical laboratory settings by trained embryologists. By facilitating precise sperm handling, the device assists in the successful execution of ICSI, a procedure used to treat male factor infertility.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

10% (w/v) Polyvinylpyrrolidone (PVP) in Hepes-HTF tissue culture media. Viscous solution designed for micro-manipulation in assisted reproductive technology.

Indications for Use

Indicated for use during intracytoplasmic sperm injection (ICSI) procedures to manage sperm motility and prevent adhesion to injection pipettes.

Regulatory Classification

Identification

Reproductive media and supplement are products that are used for assisted reproduction procedures. Media include liquid and powder versions of various substances that come in direct physical contact with human gametes or embryos (including water, acid solutions used to treat gametes or embryos, rinsing solutions, sperm separation media, supplements, or oil used to cover the media) for the purposes of preparation, maintenance, transfer or storage. Supplements are specific reagents added to media to enhance specific properties of the media (e.g., proteins, sera, antibiotics, etc.).

Special Controls

*Classification.* Class II (special controls) (mouse embryo assay information, endotoxin testing, sterilization validation, design specifications, labeling requirements, biocompatibility testing, and clinical testing). The device, when it is phosphate-buffered saline used for washing, and short-term handling and manipulation of gametes and embryos; culture oil used as an overlay for culture media containing gametes and embryos; and water for assisted reproduction applications, is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 884.9.

Submission Summary (Full Text)

{0}------------------------------------------------

Rockville MD 20850

Food and Drug Administration 9200 Corporate Boulevard

Image /page/0/Picture/2 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized caduceus symbol, featuring a triple-stranded helix intertwined with a staff. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" is arranged in a circular fashion around the symbol.

JAN 1 0 2000

Advanced Reproductive Technologies. Inc. c/o Mr. Greg Holland Holland & Associates 3722 Avenue Sausalito Irvine, CA 92606

Re: K991391

PVP, 10%, (W/V) in Hepes-HTF (Tissue Culture Media) Dated: November 29, 1999 Received: November 30, 1999 Requiatory Class: II 21 CFR 884.6180/Procode: 85 MQL

Dear Mr. Holland:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP requlation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or requlations.

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809,10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification"(21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or [phone], or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html".

Sincerely yours,

CAPT Daniel G. Schultz, M.D. Acting Director, Division of Reproductive, Abdominal, Ear, Nose and Throat, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{1}------------------------------------------------

Page 1

510(k) Number (if known):_____________________________________________________________________________________________________________________________________________________

PVP_ Device Name:_

Indications For Use:

PVP is used for the intracytoplasmic sperm injection (ICSI) procedure to decrease the motility of spermatozoa, prevent their sticking to the injection pipette during the procedure and to give more control over the flow of fluid in the ICSI needle.

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Prescription Use (Per 21 CFR 801.109) Over-The-Counter Use (Optional Format 1-2-96)

OR

(Division Sign-Off) Division of Reproductive, Abdominal, B and Radiological Devices 510(k) Number_