Last synced on 19 July 2024 at 11:05 pm

Filler, Bone Void, Non-Alterable Compound For Cranioplasty

Page Type
Product Code
Definition
A nonalterable cranial bone void filler is a device that is created from patient-specific computerized tomography (CT) imaging data and intended to fill bony voids, defects, and contour irregularities in non-load bearing regions of the cranial skeleton, and are not intrinsic to the stability of the bony structure. The materials used (e.g., metals, polyether ether ketone (PEEK), etc.) in the construction of the nonalterable cranial bone void fillers are not resorbable and cannot be altered or reshaped at the time of surgery or after implantation without changing the chemical behavior of the material.
Physical State
Manufactured as Patient-Specific Preformed Implant
Technical Method
The device is implanted in the bony void and may be secured using plates and screws to prevent the movement of the cranial bone void filler.
Target Area
Cranium, Skull
Regulation Medical Specialty
Neurology
Review Panel
Neurology
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
882.5330
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 882.5330 Preformed nonalterable cranioplasty plate

§ 882.5330 Preformed nonalterable cranioplasty plate.

(a) Identification. A preformed nonalterable cranioplasty plate is a device that is implanted in a patient to repair a skull defect and is constructed of a material, e.g., stainless steel or vitallium, that cannot be altered or reshaped at the time of surgery without changing the chemical behavior of the material.

(b) Classification. Class II (performance standards).

Filler, Bone Void, Non-Alterable Compound For Cranioplasty

Page Type
Product Code
Definition
A nonalterable cranial bone void filler is a device that is created from patient-specific computerized tomography (CT) imaging data and intended to fill bony voids, defects, and contour irregularities in non-load bearing regions of the cranial skeleton, and are not intrinsic to the stability of the bony structure. The materials used (e.g., metals, polyether ether ketone (PEEK), etc.) in the construction of the nonalterable cranial bone void fillers are not resorbable and cannot be altered or reshaped at the time of surgery or after implantation without changing the chemical behavior of the material.
Physical State
Manufactured as Patient-Specific Preformed Implant
Technical Method
The device is implanted in the bony void and may be secured using plates and screws to prevent the movement of the cranial bone void filler.
Target Area
Cranium, Skull
Regulation Medical Specialty
Neurology
Review Panel
Neurology
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
882.5330
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 882.5330 Preformed nonalterable cranioplasty plate

§ 882.5330 Preformed nonalterable cranioplasty plate.

(a) Identification. A preformed nonalterable cranioplasty plate is a device that is implanted in a patient to repair a skull defect and is constructed of a material, e.g., stainless steel or vitallium, that cannot be altered or reshaped at the time of surgery without changing the chemical behavior of the material.

(b) Classification. Class II (performance standards).