Last synced on 30 November 2024 at 11:09 am

Filler, Bone Void, Alterable Compound For Cranioplasty

Page Type
Product Code
Definition
An alterable cranial bone void filler is a device intended to be a bone substitute for the replacement of bony voids, defects, and contour irregularities in non-load bearing regions of the cranial skeleton, and are not intrinsic to the stability of the bony structure. The device is constructed from a material (e.g., calcium, polymer synthetic-based, etc.) that can be reshaped or altered at the time of surgery or after implantation without changing the chemical behavior of the material.
Physical State
Preformed Implant
Technical Method
The device is implanted in the bony void and may be secured using plates and screws to prevent the movement of the cranial bone void filler.
Target Area
Cranium, Skull
Regulation Medical Specialty
Neurology
Review Panel
Neurology
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
882.5320
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 882.5320 Preformed alterable cranioplasty plate

§ 882.5320 Preformed alterable cranioplasty plate.

(a) Identification. A preformed alterable cranioplasty plate is a device that is implanted into a patient to repair a skull defect. It is constructed of a material, e.g., tantalum, that can be altered or reshaped at the time of surgery without changing the chemical behavior of the material.

(b) Classification. Class II (performance standards).

Filler, Bone Void, Alterable Compound For Cranioplasty

Page Type
Product Code
Definition
An alterable cranial bone void filler is a device intended to be a bone substitute for the replacement of bony voids, defects, and contour irregularities in non-load bearing regions of the cranial skeleton, and are not intrinsic to the stability of the bony structure. The device is constructed from a material (e.g., calcium, polymer synthetic-based, etc.) that can be reshaped or altered at the time of surgery or after implantation without changing the chemical behavior of the material.
Physical State
Preformed Implant
Technical Method
The device is implanted in the bony void and may be secured using plates and screws to prevent the movement of the cranial bone void filler.
Target Area
Cranium, Skull
Regulation Medical Specialty
Neurology
Review Panel
Neurology
Submission Type
510(K)
Device Classification
Class 2
Regulation Number
882.5320
GMP Exempt?
No
Summary Malfunction Reporting
Eligible
Implanted Device
Yes
Life-Sustain/Support Device
No
Third Party Review
Not Third Party Eligible

CFR § 882.5320 Preformed alterable cranioplasty plate

§ 882.5320 Preformed alterable cranioplasty plate.

(a) Identification. A preformed alterable cranioplasty plate is a device that is implanted into a patient to repair a skull defect. It is constructed of a material, e.g., tantalum, that can be altered or reshaped at the time of surgery without changing the chemical behavior of the material.

(b) Classification. Class II (performance standards).