PIPERACILLIN/TAZOBACTAM ANTIMICROBIAL SUSCEPTIBILITY TEST DISC

K971633 · Oxoid , Ltd. · JTN · Jul 3, 1997 · Microbiology

Device Facts

• Record ID: K971633
• Device Name: PIPERACILLIN/TAZOBACTAM ANTIMICROBIAL SUSCEPTIBILITY TEST DISC
• Applicant: Oxoid , Ltd.
• Product Code: JTN · Microbiology
• Decision Date: Jul 3, 1997
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 866.1620
• Device Class: Class 2

Intended Use

Antimicrobial Susceptibility Test Discs are indicated for the semi-quantitative susceptibility testing by agar diffusion test procedure of rapidly growing micro-organisms. These include : Enterobacteriacae and Enterococcus spp., and by modified procedures, Haemophilus influenzae. The technical product insert details the Quality Control organisms to be use with this disc.

Device Story

Oxoid Piperacillin/Tazobactam Susceptibility Test Discs are used in clinical microbiology laboratories for in vitro diagnostic testing. The device consists of paper discs impregnated with a specific concentration of the antimicrobial agent piperacillin/tazobactam. In the agar diffusion procedure, discs are placed on inoculated agar plates; the antibiotic diffuses into the medium, inhibiting bacterial growth. The resulting zone of inhibition is measured by laboratory personnel to determine the susceptibility of the isolated microorganism to the antibiotic. This information assists clinicians in selecting appropriate antimicrobial therapy for patients with bacterial infections.

Clinical Evidence

No clinical data provided; device performance is established through bench testing and adherence to standardized agar diffusion susceptibility testing protocols.

Technological Characteristics

Paper-based antimicrobial susceptibility test discs impregnated with piperacillin/tazobactam. Operates via passive diffusion in agar media. In vitro diagnostic device.

Indications for Use

Indicated for semi-quantitative susceptibility testing of rapidly growing microorganisms, specifically Enterobacteriaceae, Enterococcus spp., and Haemophilus influenzae (via modified procedures), using agar diffusion methods.

Regulatory Classification

Identification

An antimicrobial susceptibility test disc is a device that consists of antimicrobic-impregnated paper discs used to measure by a disc-agar diffusion technique or a disc-broth elution technique the in vitro susceptibility of most clinically important bacterial pathogens to antimicrobial agents. In the disc-agar diffusion technique, bacterial susceptibility is ascertained by directly measuring the magnitude of a zone of bacterial inhibition around the disc on an agar surface. The disc-broth elution technique is associated with an automated rapid susceptibility test system and employs a fluid medium in which susceptibility is ascertained by photometrically measuring changes in bacterial growth resulting when antimicrobial material is eluted from the disc into the fluid medium. Test results are used to determine the antimicrobial agent of choice in the treatment of bacterial diseases.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image is a black and white logo for the Department of Health & Human Services USA. The logo features a stylized image of an eagle with three heads, representing the three branches of government. The words "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" are arranged in a circle around the eagle.

Food and Drug Administration 2098 Gaither Road Rockville MD 20850

Andy Hollingsworth Quality Systems Manager Oxoid Limited Wade Road Basingstoke Hants RG24 8PW England

JUL - 3 1997

Re: K971633

Trade Name: Piperacillin/Tazobactam Antimicrobial Susceptibility Test Regulatory Class: II Product Code: JTN Dated: June 10, 1997 Received: June 12, 1997

Dear Mr. Hollingsworth:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Paris 800 to 895. A substantially equivalent deterniuation assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal Laws or Regulations.

{1}------------------------------------------------

#### Page 2

Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at [phone].

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll free number [phone] or at [phone] or at its internet address "http://www.fda.gov/cdrh/dsmamain.html"

Sincerely yours,

Steven Sutman

Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

# 510(K) Submission for Oxoid Antimicrobial Susceptibility Test Disc

# PIPERACILLIN / TAZOBACTAM

### OXOID LTD

510(K) Number : K971633

Device Name : Oxoid Piperacillin/Tazobactam Susceptibility Test Disc

#### Indication for Use :

Antimicrobial Susceptibility Test Discs are indicated for the semi-quantitative susceptibility testing by agar diffusion test procedure of rapidly growing micro-organisms. These include : Enterobacteriacae and Enterococcus spp., and by modified procedures, Haemophilus influenzae.

The technical product insert details the Quality Control organisms to be use with this disc.

​

Arlen Penhos

(Division Sign-O Division of Clinical L 510(k) Number.

\✓ For prescription use

Image /page/2/Picture/12 description: The image shows a black and white drawing of a round object. The object is mostly black, but there are many small white dots scattered throughout. The object appears to be textured, and it is not perfectly round.