← Product Code [CZW](/submissions/IM/subpart-f%E2%80%94immunological-test-systems/CZW) · K994296 # DIMENSION C3 FLEX REAGENT CARTRIDGE (K994296) _Dade Behring, Inc. · CZW · Mar 1, 2000 · Immunology · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/IM/subpart-f%E2%80%94immunological-test-systems/CZW/K994296 ## Device Facts - **Applicant:** Dade Behring, Inc. - **Product Code:** [CZW](/submissions/IM/subpart-f%E2%80%94immunological-test-systems/CZW.md) - **Decision Date:** Mar 1, 2000 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 866.5240 - **Device Class:** Class 2 - **Review Panel:** Immunology ## Indications for Use The C3 Flex® reagent cartridge for the Dimension® clinical chemistry system is an in vitro diagnostic test intended to quantitatively measure complement C3 (C3) in serum as an aid in the diagnosis of immunologic disorders associated with complement C3 protein. ## Device Story C3 Flex® reagent cartridge is an in vitro diagnostic test for use on the Dimension® clinical chemistry system. It measures complement C3 protein levels in serum samples. The device utilizes a turbidimetric immunoprecipitation assay; it relies on the precipitation of complement C3 by rabbit polyclonal antibodies. The system performs bichromatic endpoint detection at 340 and 700 nm. The assay is intended for clinical laboratory use to assist physicians in diagnosing immunologic disorders. Results are provided as quantitative values, which clinicians use to assess patient complement C3 status. ## Clinical Evidence Clinical evidence consists of a split-sample method comparison study. 94 clinical patient serum samples were tested using both the Dimension® C3 Flex® reagent cartridge and the predicate Beckman Array® Complement C3 method. Results showed a correlation coefficient of 0.980, a slope of 1.01, and an intercept of 6.7 mg/dL. ## Technological Characteristics Quantitative, turbidimetric, immunoprecipitation assay. Uses rabbit polyclonal antibodies. Detection via bichromatic endpoint measurement at 340 and 700 nm. Designed for use on the Dimension® clinical chemistry system. ## Regulatory Identification A complement components immunological test system is a device that consists of the reagents used to measure by immunochemical techniques complement components C1q , C1r , C1s , C2 , C3 , C4 , C5 , C6 , C7 , C8 , and C9 , in serum, other body fluids, and tissues. Complement is a group of serum proteins which destroy infectious agents. Measurements of these proteins aids in the diagnosis of immunologic disorders, especially those associated with deficiencies of complement components. ## Predicate Devices - Beckman Array® Complement C3 Assay ([K780913](/device/K780913.md); [K922273](/device/K922273.md)) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ K994296 DADE BEHRING ## MAR - 1 2000 DADE BEHRING INC. P.O. Box 6101 Newark, DE 19714 ## Summary of Safety and Effectiveness Information This summary of 510(k) safety and effectiveness information is being submitted in accordance with the requirements of SMDA 1990 and 21 CFR 807.92. | Submitter's Name: | Richard M. Vaught
Dade Behring Inc.
P.O. Box 6101
Newark, DE 19714-6101 | |--------------------------|----------------------------------------------------------------------------------| | Date of Preparation: | February 17, 2000 | | Name of Product: | C3 Flex® Reagent Cartridge | | FDA Classification Name: | Complement C3, Antigen, Antiserum, Control; 82CZW | | Predicate Device: | Beckman Array® Complement C3 Assay (K780913; K922273) | Device Description: The C3 Flex® reagent cartridge for the Dimension® clinical chemistry system is a quantitative, turbidimetric assay using endpoint detection, based on the precipitation of complement CJ by its polyclonal antibody. Intended Use: The C3 Flex® reagent cartridge for the Dimension® clinical chemistry system is an in vitro diagnostic test intended to quantitatively measure complement C3 (C3) in serum as an aid in the diagnosis of immunologic disorders associated with complement C3 protein. | | Comparison to Predicate Device:
Dimension® C3 Flex®
Reagent Cartridge | Beckman
Complement C3 | |-------------|-----------------------------------------------------------------------------|--------------------------| | Item | | | | Sample Type | Serum | Serum | | Methodology | Immunoprecipitation | Immunoprecipitation | | Antibody | Rabbit polyclonal | Goat polyclonal | | Detection | Bichromatic endpoint
(340 and 700 nm)
(turbidimetry) | Nephelometry
(405 nm) | Comments on Substantial Equivalence: Split sample comparison between the Dimension® C3 Flex® reagent cartridge method and the Beckman Array® Complement C3 method gave a correlation coefficient of 0.980, slope of 1.01, and an intercept of 6.7 mg/dL when tested with 94 clinical patient samples. The C3 Flex® reagent cartridge method is substantially equivalent in principle and performance to Conclusion: the Beckman Array® Complement C3 method based on the split sample comparison discussed above. KmVaught Richard M. Vaught Richard M. Vaught Regulatory Affairs and Compliance Manager Date: February 17, 2000 {1}------------------------------------------------ Image /page/1/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo features a circular design with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is a stylized eagle emblem, composed of three curved lines that suggest the bird's head, body, and tail feathers. ## MAR - 1 2000 Food and Drug Administration 2098 Gaither Road Rockville MD 20850 Mr. Richard M. Vaught Regulatory Affairs and Compliance Manager Dade Behring, Inc. P.O. Box 6101 Newark, Delaware 19714-6101 Re: K994296 Trade Name: C3 Flex® Reagent Cartridge Regulatory Class: II Product Code: CZW Dated: December 20, 1999 Received: December 21, 1999 Dear Mr. Vaught: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. {2}------------------------------------------------ Page 2 This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device. please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html". Sincerely yours, Steven Butman Steven I. Gutman, M.D., M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ ## Indications For Use Statement Device Name: Dimension® C3 Flex® Reagent Cartridge Indications for Use: The C3 Flex® reagent cartridge for the Dimension® clinical chemistry system is an in vitro diagnostic test intended to quantitatively measure complement C3 (C3) in serum as an aid in the diagnosis of immunologic disorders associated with complement C3 protein. Rm Vaught Richard M. Vaught Regulatory Affairs and Compliance Manager February 28, 2000 (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Petu E. Mefin (Division Sign-Off, Division of Clinical Laboratory Der 510(k) Number Prescription Use V (Per 21 CFR 801.109) ' OR Over-the-counter Use (Optional format 1-2-96) --- **Source:** [https://fda.innolitics.com/submissions/IM/subpart-f%E2%80%94immunological-test-systems/CZW/K994296](https://fda.innolitics.com/submissions/IM/subpart-f%E2%80%94immunological-test-systems/CZW/K994296) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com