← Product Code [LYZ](/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYZ) · K971423 # VINYL PATIENT EXAMINATION GLOVE, POWDERED (K971423) _Shanghai Foremost Plastic Industrial Co., Ltd. · LYZ · May 23, 1997 · General Hospital · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYZ/K971423 ## Device Facts - **Applicant:** Shanghai Foremost Plastic Industrial Co., Ltd. - **Product Code:** [LYZ](/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYZ.md) - **Decision Date:** May 23, 1997 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 880.6250 - **Device Class:** Class 1 - **Review Panel:** General Hospital - **Attributes:** 3rd-Party Reviewed ## Indications for Use The applicant device is a disposable device intended for medical purpose that is worn on the examiner's hand to prevent contamination between patient and examiner. ## Device Story Vinyl patient examination glove; disposable; worn on examiner's hand/finger. Functions as physical barrier to prevent cross-contamination between patient and examiner during medical procedures. Manufactured from vinyl; powdered with absorbable dusting starch (USP). Used in clinical settings by healthcare providers. Provides protection through material integrity; verified via water leak testing and physical property testing (tensile strength/elongation). ## Clinical Evidence Clinical evidence includes a Modified Draize Test conducted on human subjects to evaluate skin irritation and allergic contact dermatitis potential. Results indicated the device did not induce clinically significant irritation or allergic contact dermatitis. ## Technological Characteristics Vinyl patient examination glove; powdered with absorbable dusting starch (USP). Dimensions and physical properties (tensile strength, elongation) conform to ASTM D5250-92. Barrier integrity verified via FDA 1000 ml water leak test (AQL 4.0). ## Regulatory Identification A non-powdered patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. A non-powdered patient examination glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing. ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ # SHANGHAI FOREMOST PLASTIC INDUSTRIAL CO., LTD. Yan Li River Bridge East, Che Xing Highway, Che Dun Town, Songjiang County, Shanghai 201611, PRC TEL: 86-21-5760-2752 FAX: 86-21-5760-1003 MAY 2 3 1997 K971423 Page 1 of 2 ## 510 (k) Summary Date of summary prepared: March 19, 1997 Applicant: l. > Shanghai Foremost Plastic Industrial Co., Ltd. Yan Li River Bridge East Che Xing Highway, Che Dun Town Songjiang County, Shanghai 201611 People's Republic of China Tel: 86 21 5760-2752 Fax: 86 21 5760-1003 - 2. Contact Person: Dr. Tiang S. Chang 1016 Seward Avenue Westfield, N. J. 07090 Fax: 908 233-0925 e-mail: tschang@earthlink.net Tel: 908 233-3571 - 3. Name of Device: Vinyl Patient Examination Gloves, Powdered - 4. Device Description: Classified by FDA's General and Plastic Surgery Device Panel as Class I, CFR 880.6250, Vinyl Patient Examination Glove, 80LYZ, powdered with an absorbable dusting starch powder, USP, Class III and conform to all requirements of ASTM Standard D5250-92 and FDA 1000 ml water leak test. - ર્ડ Intended Use The applicant device is a disposable device intended for medical purpose that is worn on the examiner's hand to prevent contamination between patient and examiner. {1}------------------------------------------------ ## SHANGHAI FOREMOST PLASTIC INDUSTRIAL CO., LTD. Yan Li River Bridge East, Che Xing Highway, Che Dun Town, Songjiang County, Shanghai 201611, PRC TEL: 86-21-5760-2752 FAX: 86-21-5760-1003 510 (k) summary continue. page 2 of 2. #### Comparison to Predicate Device 6. Non-Clinical Performance data Applicant devices comply with ASTM Standard D-5250-92 and FDA 1000 ml water leak test for pin-holes. | Test | | ASTM D5250-92 | Applicant Device | |-------------------------------------|-------------------------|---------------|-------------------------------------------------| | Length (mm) | | | | | Size | S | Min. 230 mm | 240 ± 5 mm | | | M | Min. 230 mm | 240 ± 5 mm | | | L | Min. 230 mm | 240 ± 5 mm | | | XL | Min. 230 mm | 240 ± 5 mm | | Width (mm) | | | | | Size | S | 85 ± 5 mm | 87 ± 3 mm | | | M | 95 ± 5 mm | 98 ± 3 mm | | | L | 105 ± 5 mm | 106 ± 3 mm | | | XL | 115 ± 5 mm | 114 ± 3 mm | | Thickness (mm) | | | | | | Finger | Min. 0.05 mm | Min. 0.08 mm | | | Palm | Min. 0.08 mm | Min. 0.11 mm | | Physical Properties
Before Aging | | | | | | Tensile Strength (MPa) | Min. 9 MPa | Min. 10 MPa | | | Ultimate Elongation (%) | Min. 300% | Min. 300% | | After Aging | | | | | | Tensile Strength (MPa) | Min. 9 MPa | Min. 9.5 MPa | | | Ultimate Elongation (%) | Min. 300% | Min. 300% | | FDA Water Leak Test | | | Meets AQL 4.0 with a
Inspection Level of S-4 | ### Clinical Performance Data The results of Modified Draize Test suggest the applicant device did not induce clinically significant irritation nor show any evidence of induced allergic contact dermatitis in human subjects. #### 7. Conclusions The applicant devices conform fully to ASTM D5250-92 and applicable 21 CFR requirements, and meets FDA 1000 ml Water Leak Test. {2}------------------------------------------------ Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES • USA" arranged around the perimeter. Inside the circle is a stylized symbol featuring three curved shapes that resemble human figures or abstract forms. MAY 2 3 1997 Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 Shanghai Foremost Plastic Industrial Co, Ltd. C/O Mr. Robert Mosenkis ......... President ………… CITECH 5200 Butler Pike Plymouth Meetling, Pennsyvania 19462-1298 Re: K971423 Vinyl Patient Examination Glove, Powdered Trade Name: Requlatory Class: I Product Code: LYZ Dated: April 16, 1997 Received: April 17, 1997 Dear Mr. Mosenkis: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major requlations affecting your device can be found in the Code of Federal Requlations, Title 21, Parts 800 to 895. ਖੇ substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any {3}------------------------------------------------ Page 2 - Mr. Mosenkis obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your device as . . described in your \$10(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) Additionally, for questions on the promotion and 594-4692. advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, Timothy A. Ulatowski Direc Division of Dental, Infection Control, and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ Attachment 1 b I İ of Page | Labels | Values | |-------------------------|-------------------------| | Number (if known): | KG711423 | evice Name: Patient Examination Glove, Powdered dications For Use: A patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Olin S. Lim --- (Division Sign-Off) Division of Dagcul, Infection Control Division of Danial, Infection Control. and General Hospital Devic 510(k) Number ecription Use 21 CFR 801.109) OR Over-The-Counter Use X (Optional Format 1-2-96) --- **Source:** [https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYZ/K971423](https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYZ/K971423) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com