← Product Code [LYY](/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYY) · K993865 # GREEN PEPPERMINT FLAVORED POWDERED LATEX EXAMINATION GLOVES (K993865) _Supermax Sdn Bhd · LYY · Jan 20, 2000 · General Hospital · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYY/K993865 ## Device Facts - **Applicant:** Supermax Sdn Bhd - **Product Code:** [LYY](/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYY.md) - **Decision Date:** Jan 20, 2000 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 880.6250 - **Device Class:** Class 1 - **Review Panel:** General Hospital ## Indications for Use A powdered patient examination glove is a disposable device made of latex material that may bear a trace amount of glove powder and is intended to be worn on the hand or fingers for medical purposes to provide a barrier against potential infectious materials and other contaminants. ## Device Story Green Peppermint Flavored Powdered Latex Examination Gloves are disposable, single-use medical gloves. Constructed from latex, they feature a peppermint scent and trace amounts of powder to facilitate donning. Used in clinical and medical settings by healthcare professionals to provide a protective barrier against infectious agents and contaminants. The device functions as a physical barrier; it does not involve electronic components, software, or automated processing. The provider wears the gloves during patient examinations or procedures to prevent cross-contamination, thereby protecting both the patient and the clinician. ## Clinical Evidence No clinical data provided; bench testing only. ## Technological Characteristics Material: Latex. Form factor: Disposable examination glove. Features: Powdered, peppermint-flavored. Energy source: None. Connectivity: None. Sterilization: Not specified. ## Regulatory Identification A non-powdered patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. A non-powdered patient examination glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing. ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ Image /page/0/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo features a stylized depiction of an eagle with three curved lines representing its wings. The eagle is facing left. Encircling the eagle is the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" in a circular arrangement. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 JAN 2 0 2000 Mr. Stanley Thai Managing Director Supermax Glove Manufacturing SDN. BHD. Lot 42, Putra Industrial Park Bukit Rahman Putra 47000 Sungai Buloh Selangor Darul Ehsan, Malaysia Re : K993865 Green Peppermint Flavored Powdered Latex Trade Name: Examination Gloves Regulatory Class: I Product Code: LYY November 11, 1999 Dated: November 15, 1999 Received: Dear Mr. Thai: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual reqistration, listing of devices, qood manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in {1}------------------------------------------------ Page 2 - Mr. Thai the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, C. Whitmarsh Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ ## 510 (k) NUMBER (II: KNOWN) : 1<9938 6 5 ## DEVICE NAME GREEN PEPPERMINT FLAVORED POWDERED LATEX EXAMINATION GLOVES INDICATIONS FOR USE : A powdered patient examination glove is a disposable device made of latex material that may bear a trace amount of glove powder and is intended to be worn on the hand or fingers for medical purposes to provide a barrier against potential infectious materials and other contaminants. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH Office of Device Evaluation (ODE) Prescription Use (per 21 CFR 801.109) OR Over-The-Counter-Use (Optional Format 1-2-96) Division Sign-Off) Division of Dental, Infection Contro and General Hospital Device 510(k) Number - --- **Source:** [https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYY/K993865](https://fda.innolitics.com/submissions/HO/subpart-g%E2%80%94general-hospital-and-personal-use-miscellaneous-devices/LYY/K993865) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com