← Product Code [LZG](/submissions/HO/subpart-f%E2%80%94general-hospital-and-personal-use-therapeutic-devices/LZG) · K071788 # AVIATOR INSULIN PUMP (K071788) _Abbott Diabetes Care, Inc. · LZG · Jan 11, 2008 · General Hospital · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/HO/subpart-f%E2%80%94general-hospital-and-personal-use-therapeutic-devices/LZG/K071788 ## Device Facts - **Applicant:** Abbott Diabetes Care, Inc. - **Product Code:** [LZG](/submissions/HO/subpart-f%E2%80%94general-hospital-and-personal-use-therapeutic-devices/LZG.md) - **Decision Date:** Jan 11, 2008 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 880.5725 - **Device Class:** Class 2 - **Review Panel:** General Hospital - **Attributes:** Therapeutic ## Indications for Use The Aviator Insulin Pump is indicated for continuous delivery of insulin, at set and variable rates and as an aid in the management of diabetes mellitus in persons requiring insulin. ## Device Story Microprocessor-controlled, battery-powered external insulin infusion pump; delivers insulin via proprietary disposable syringe and infusion set. Features two delivery modes: basal (continuous pulses every three minutes) and bolus. Designed for diabetes management; operated by patient. System uses dual microprocessors for drug delivery control and monitoring. Enhanced user interface compared to predicate. Bench testing, software validation, human factors study, and electromagnetic compatibility testing performed to ensure safety and effectiveness. ## Clinical Evidence No clinical data. Evidence consists of bench testing, software validation, human factors study, and electromagnetic compatibility testing. Biocompatibility testing per ISO 10993-1 and sterilization per ISO 11135-1994. ## Technological Characteristics Microprocessor-controlled, battery-powered infusion pump. Dual-microprocessor architecture for delivery control/monitoring. Disposable syringe and infusion set. Biocompatibility per ISO 10993-1; sterilization per ISO 11135-1994. Electromagnetic compatibility testing performed. ## Regulatory Identification An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm. ## Predicate Devices - Abbott Diabetes Care Insulin Pump (K05104-) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ Abbott Diabetes Care Inc. Image /page/0/Picture/1 description: The image shows the text "K071788 p. lot of 2" in handwritten font. Below this text is the text "Aviator Insulin Pump" in a printed font. The image appears to be a label or document related to the Aviator Insulin Pump, possibly indicating a lot number or identification code. | JAN 1 1 2008
Section 5: 510(k) Summary
(as required by 21 CFR 807.92) | | |-----------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------| | Submitted by: | Abbott Diabetes Care
1360 South Loop Road
Alameda, CA 94502 | | Company Contact: | Sarah Harrington
Senior Regulatory Specialist
(510) 239-2732
sarah.harrington@abbott.com | | Date Prepared: | June 29, 2007 | | Trade Name: | Aviator insulin pump | | Common/Usual Name: | External Insulin Infusion Pump | | Classification Name: | Class II: Insulin Infusion Pump (LZG)
21 CFR 880.5725 | | Substantially Equivalent
Device: | Abbott Diabetes Care Insulin Pump, K05104- | ## Device Description The Aviator insulin pump is a microprocessor controlled, battery powered, insulin pump system. The pump continuously delivers insulin according to an individualized software plan. A proprietary, disposable syringe is used as the insulin reservoir. The other component of the system is a disposable infusion set. There are two modes of delivery: basal and bolus. Basal delivery is a continuous infusion providing insulin the body needs to maintain target blood glucose levels under fasting conditions. To conserve power, basal delivery occurs in discrete pulses that are spaced nominally three minutes apart. {1}------------------------------------------------ K071788 fr 2042 Aviator Insulin Pump ## Intended Use The Aviator insulin pump is indicated for continuous delivery of insulin, at set and variable rates and as an aid in the management of diabetes mellitus in persons requiring insulin. #### Technological Characteristics The Aviator insulin pump shares the same intended use and indications for use as the predicate device, the Abbott Diabetes Care infusion pump. Both the Aviator infusion pump and the predicate pump have two microprocessors to control and monitor drug delivery. The user interface on the Aviator was enhanced as a result of user needs. ## Performance Data Bench testing and software validation verified the requirements stated in the specification documents. A Human Factors Study was conducted to validate the overall design of the Aviator insulin pump in the hands of the user. Environmental testing includes testing for clectromagnetic compatibility. The syringe and infusion set materials will undergo biocompatibility testing, if required, in accordance to ISO 10993-1. The syringe will be sterilized to the requirements stated in ISO 11135-1994. #### Conclusion The performance data demonstrates substantial equivalence between the Aviator infusion pump and the Abbott Diabetes Care infusion pump. When compared to the legally marketed Abbott Diabetes Care infusion pump, the Aviator insulin pump is safe and effective for its intended use. {2}------------------------------------------------ Image /page/2/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo consists of a stylized caduceus symbol, which features three abstract human figures connected by flowing lines. The text "DEPARTMENT OF HEALTH AND HUMAN SERVICES - USA" is arranged in a circular pattern around the symbol. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 JAN 1 1 2008 Ms. Sarah Harrington Senior Regulatory Specialist Abbott Diabetes Care, Incorporated 1360 South Loop Road Alameda, California 94502 Re: K071788 Trade/Device Name: Aviator Insulin Pump Regulation Number: 21 CFR 880.5725 Regulation Name: Infusion Pump Regulatory Class: II Product Code: LZG Dated: December 19, 2007 Received: December 20, 2007 Dear Ms. Harrington: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {3}------------------------------------------------ Page 2 - Ms. Harrington Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0115. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html. Sincerely vours. Clus Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ # Indications for Use 510(k) Number (if known): ____________________________________________________________________________________________________________________________________________________ Device Namc:__________________________________________________________________________________________________________________________________________________________________ Indications For Use: The Aviator Insulin Pump is indicated for continuous delivery of insulin, at set and variable rates and as an aid in the management of diabetes mellitus in persons requiring insulin. Prescription Use _____________________________________________________________________________________________________________________________________________________________ AND/OR Over-The-Counter Use (Part 21 CFR 801 Subpart D) (21 CFR 801 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of In Vitro Diagnostic Devices (OIVD) Cun (Division Sign-Off) Division of Anesthesiology, General Hospital Infection Control, Dental Devices 510(k) Number: الأدار الأكل ال Response to FDA Deficiency Letter --- **Source:** [https://fda.innolitics.com/submissions/HO/subpart-f%E2%80%94general-hospital-and-personal-use-therapeutic-devices/LZG/K071788](https://fda.innolitics.com/submissions/HO/subpart-f%E2%80%94general-hospital-and-personal-use-therapeutic-devices/LZG/K071788) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com