K972452 · Alshifa Medical Syringes Mfg. Co., Ltd. · FMF · Jul 24, 1997 · General Hospital
Device Facts
Record ID
K972452
Device Name
RAMY INTEGRATED NEEDLE SYRINGE
Applicant
Alshifa Medical Syringes Mfg. Co., Ltd.
Product Code
FMF · General Hospital
Decision Date
Jul 24, 1997
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 880.5860
Device Class
Class 2
Attributes
Therapeutic
Indications for Use
Single use piston syringe used to inject fluids into the body. The device has an integrated attached needle and can be sold for prescription or non-prescription use. The tuberculin syringe is for prescription use and the insulin syringe can be sold for non-prescription use. The syringes are sold sterile and are also non-pyrogenic and non-toxic.
Device Story
Ramy Piston Syringe is a single-use, sterile, non-pyrogenic, non-toxic device featuring an integrated needle. Used for fluid injection into the body. Tuberculin version requires prescription; insulin version available over-the-counter. Operates as a standard manual piston syringe.
Clinical Evidence
No clinical data; bench testing only.
Technological Characteristics
Manual piston syringe with integrated needle. Sterile, non-pyrogenic, non-toxic materials.
Indications for Use
Indicated for injection of fluids into the body. Tuberculin syringe for prescription use; insulin syringe for non-prescription use.
Regulatory Classification
Identification
A piston syringe is a device intended for medical purposes that consists of a calibrated hollow barrel and a movable plunger. At one end of the barrel there is a male connector (nozzle) for fitting the female connector (hub) of a hypodermic single lumen needle. The device is used to inject fluids into, or withdraw fluids from, the body.
K153537 — Sol-M Insulin Syringe, Sol-M TB Syringe · Sol-Millennium Medical, Inc. · Jun 17, 2016
K063348 — TOP FINE INSULIN SYRINGE · Daejin Tech Medical Manufacturing Co., Ltd. · Mar 1, 2007
K062753 — FORSURE DISPOSABLE SYRINGE WITH NEEDLE, MODEL 1CC, 3C, 5CC, 10CC, 20CC, 50CC · Surgimed, Inc. · Feb 8, 2007
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image is a black and white seal for the Department of Health & Human Services - USA. The seal is circular with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the top half of the circle. The bottom half of the circle contains a stylized image of a bird with three human profiles inside of it.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
Mr. Milton N. Beneke, Jr. ·Official Correspondent Alshifa Medical Syringes Manufacturing Company, Itd. C/O MDI Consultants, Incorporated 55 Northern Boulevard, Suite 410 Great Neck, New York 11021
Re : K972452 JUL 2 4 1997 Trade Name: Ramy Syringe Regulatory Class: II Product Code: FMF Dated: May 5, 1997 Received: May 7, 1997
Dear Mr. Beneke, Jr.:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. ਕਿ substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory In addition, FDA may publish further announcements action. concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531
{1}------------------------------------------------
Page 2 - Mr. Beneke, Jr.
through 542 of the Act for devices under the Electronic enrough Siz or chorol provisions, or other Federal laws or requlations.
This letter will allow you to begin marketing your device as described in your 510 (k) premarket notification. The FDA findinq of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4618. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to ene regaracion chorosod) Missianalir by Dother general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Clivatast
Timoty A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
EXHIBIT #1 Page 1 of 1 ·
510(k) Number (if known):- K 9 72 4 5 2
Device Name: RAMY PISTON SYRINGE ·
Indications For Usc:
Single use piston syringe used to inject fluids into the body. The device has an integrated attached needle and can be sold for prescription or non-prescription use. The tuberculin syringe is for prescription use and the insulin syringe can be sold for non-prescription use. The syringes are sold sterile and are also non-pyrogenic and non-toxic.
(PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
(Division Sign-Off) Fabriccia Cccentr
Division of Dental, Infection Control,
and General Hospital Device
510(k) Number K972452
Prescription Use (Per 21 CFR 801.109)
ਾਲ
Over-The Counter Use Insulin
(Options) Forced 1-2-96)
Panel 1
/
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.