PROFEEL POWDER FREE SURGICAL GLOVES (PROTEIN CONTENT LABELING)

K972621 · Wembley Rubber Products (M) Sdn Bhd · KGO · Oct 24, 1997 · General, Plastic Surgery

Device Facts

Record IDK972621
Device NamePROFEEL POWDER FREE SURGICAL GLOVES (PROTEIN CONTENT LABELING)
ApplicantWembley Rubber Products (M) Sdn Bhd
Product CodeKGO · General, Plastic Surgery
Decision DateOct 24, 1997
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 878.4460
Device ClassClass 1

Intended Use

The gloves are intended to be worn on the hand of healthcare personnel, operating room personnel and similar personnel to prevent contamination between the healthcare or similar personnel and the patient's body, fluids, waste, or environment.

Device Story

Profeel Powder Free Surgical Gloves are natural rubber latex gloves designed for use by healthcare and operating room personnel. The device acts as a physical barrier to prevent cross-contamination between personnel and patients, including exposure to body fluids, waste, or the environment. The gloves are manufactured to meet ASTM D3577-91 standards and feature a protein content labeling claim of 50 micrograms or less per gram. They are intended for use in clinical and surgical settings to maintain sterile fields and protect both the wearer and the patient.

Clinical Evidence

Bench testing only. Performance data compared against ASTM D3577-91 requirements, including 1000 ml watertight testing (passed at AQL 1.0), dimensions (length and palm width), and physical properties (tensile strength and ultimate elongation before and after aging). Protein content was measured using ASTM D5712, confirming levels below 50 micrograms/gram. Powder content was measured at below 2 mg/glove.

Technological Characteristics

Natural rubber latex surgeon glove. Meets ASTM D3577-91 standards. Powder-free (below 2 mg/glove). Protein content below 50 micrograms/gram. Dimensions and physical properties (tensile strength, elongation) verified against ASTM specifications. Sterilization method not specified.

Indications for Use

Indicated for use by operating room personnel to protect surgical wounds from contamination. Device is made of natural rubber latex.

Regulatory Classification

Identification

A non-powdered surgeon's glove is a device intended to be worn on the hands of operating room personnel to protect a surgical wound from contamination. A non-powdered surgeon's glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing.

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Figure/0 description: The image shows the letters "WRP" in a bold, sans-serif font. The letters are arranged horizontally, with "W" on the left, "R" in the middle, and "P" on the right. The letters are black and are surrounded by a thick black border that forms a rounded rectangle. The background of the image is white. 5972621 ## WEMBLEY RUBBER PRODUCTS (M) S ' ot 1, Jalan 3, Kawasan Perusahaan Baru Salak Tinggi, 43900 Sepang, Selangor Darul Ehean, Malaysia nt 1, Jalan 3, Kawasan Petusanaan Baliuar Baru Baru Sarak Tinggi, 1990- Bopang, 1996-1495 / 1496 Fax: (603) 846-1488 / 1608 OCT 2 4 1997 ## CONTACT PERSON : MR. Y. W. CHOW ## 510 (K) SUMMARY - : PROFEEL POWDER FREE SURGICAL GLOVES 1. Trade Name (PROTEIN CONTENT LABELING) ( 50 MKroqram or - 2. Common Name : Surgeon Gloves . - 3. Classification Name : Surgeon Glove ## 4. Substantial Equivalence : Class I natural rubber latex surgeon glove, 79 KGO, powder free, protein content labeling, that meets all of the requirements of ASTM standard D3577-91. ## 5. Description of device : Class I natural rubber latex surgeon glove, 79 KGO, powder free, protein content labeling, that meets all of the requirements of ASTM standard D3577-91. ## 6. Intended use of device : The gloves are intended to be worn on the hand of healthcare personnel, operating room personnel and similar personnel to prevent contamination between the healthcare or similar personnel and the patient's body, fluids, waste, or environment. Page 1 of 3 Image /page/0/Picture/17 description: The image shows a circular logo with the letter 'A' in the center. The words 'REGISTERED MANUFACTURER' are written around the top half of the circle, and 'DM' is written at the bottom. The logo appears to be a stamp or seal, possibly indicating that a product or company is registered as a manufacturer. Image /page/0/Picture/18 description: The image shows a circular logo with a heart and an inverted triangle inside. The logo is surrounded by text, but the text is not clear enough to read. The logo appears to be a certification mark or a symbol of quality assurance. The image is black and white and has a slightly grainy texture. Image /page/0/Picture/19 description: The image shows a black and white logo. The logo consists of a black diamond shape with a white border. Above the diamond is a white oval shape with the word "REGISTERED" in black letters. Below the diamond are the letters "MS ISO 9002 : 1994". Image /page/0/Picture/20 description: The image shows the CE marking, a symbol used to indicate conformity with health, safety, and environmental protection standards for products sold within the European Economic Area. The letters 'CE' are prominently displayed, and below the marking, the text 'COUNCIL DIRECTIVE 93/42/EEC' is visible. This directive is related to medical devices, suggesting the product bearing this mark complies with the relevant European regulations for medical devices. {1}------------------------------------------------ ## 7. Summary of Performance data : # K972621 Performance data of gloves to ASTM D 3577-91 and FDA 1000 ml watertight test. | TEST | ASTM D 3577-91 | PROFEEL Powder Free<br>Surgical Gloves (Protein<br>Content Labeling) | |-------------------------|----------------|----------------------------------------------------------------------| | 1. Watertight (1000 ml) | S-4,AQL 1.5 | Pass based on AQL of 1.0 | | 2. Length (mm) | | | | Size | | | | 5½ | min 245 | 277 | | 6 | min 265 | 282 | | 6½ | min 265 | 281 | | 7 | min 265 | 299 | | 7½ | min 265 | 298 | | 8 | min 265 | 298 | | 8½ | min 265 | 298 | | 9 | min 265 | 299 | | 3. Palm width (mm) | | | | Size | | | | 5½ | 70 ± 6 | 72 | | 6 | 76 ± 6 | 78 | | 6½ | 83 ± 6 | 83 | | 7 | 89 ± 6 | 90 | | 7½ | 95 ± 6 | 95 | | 8 | 102 ± 6 | 102 | | 8½ | 108 ± 6 | 108 | | 9 | 114 ± 6 | 114 | | 4. Thickness (mm) | | | | Finger | min 0.10 | 0.23 | | Palm | min 0.10 | 0.20 | | 5. Physical Properties | | | | Before Aging : | | | | Tensile Strength (MPa) | min 24 | 28.19 | | Ultimate Elongation (%) | min 750 | 827 | | After Aging : | | | | Tensile Strength (MPa) | min 18 | 22.23 | | Ultimate Elongation (%) | min 560 | 898 | | 6. Powder Content | - | below 2 mg / glove | | 7. Protein Content | - | below 50 microgram / gram | Page 2 Of 3 {2}------------------------------------------------ K972621 ## 8. Substantial equivalence based on assessment of Non-Clinical performance data The performance test data of device as shown above indicate that this glove meets requirements of ASTM D 3577-91. Protein content tested on recently manufactured and accelerated ageing gloves using ASTM D5712 is below 50 microgram / gram #### 9. Conclusion This glove exceed the ASTM D 3577-91 requirements, meet pinhole FDA requirements and below 50 microgram / gram protein content labeling claim. Date Summary Prepared : June 14, 1997 Page 3 of 3 {3}------------------------------------------------ Image /page/3/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with its wings spread, enclosed within a circle. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" is arranged around the upper portion of the circle. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20856 Mr. Yue Wah Chow Vice President, Quality Assurance/Regulatory Affairs Wembley Rubber Products (M) Sdn. Bhd. OCT 2 4 1997 Lot 1, Jalan 3 Kawasan Perusahaan Bandar Baru Salak Tinggi, Sepang Selangor, Malaysia Re : K972621 Profeel Powder Free Latex Surgical Gloves Trade Name: (Protein Content Labeling Claim (50 Microgram or Less) Regulatory Class: I Product Code: KGO Dated: October 14, 1997 October 14, 1997 Received: Dear Mr. Chow: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions aqainst misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical General requlation (21 CFR Part 820) and that, Devices: through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory In addition, FDA may publish further announcements action. concerning your device in the Federal Register. Please note: {4}------------------------------------------------ Page 2 - Mr. Chow this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or requlations. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling requlation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4618. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the requlation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {5}------------------------------------------------ : . 510(k) Number (if known) : _ K 9 7 26 2 | ## Device Name : PROFEEL POWDER FREE SURGICAL GLOVES (PROTEIN CONTENT LABELING) 50 Microgram of Less 】 【 ## Indications For Use : - 1. The surgeon's glove is a device made of natural rubber intended to be worn by operating room personnel to protect a surgical wound from contamination. Concurrence of CDRH, Office of Device Evaluation (ODE) | | <i></i> S. Lim | |---------------------------------------------------------------------|----------------| | (Division Sign-Off) | | | Division of Dental, Infection Control, and General Hospital Devices | | | 510(k) Number | K972621 | | Prescription Use (Per 21 CFR 801.109) | OR Over-The-Counter Use X | |---------------------------------------|---------------------------| |---------------------------------------|---------------------------|
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...