BELL PROSTHESIS (PARTIAL)

K972492 · Heinz Kurz · ETB · Aug 4, 1997 · Ear, Nose, Throat

Device Facts

Record IDK972492
Device NameBELL PROSTHESIS (PARTIAL)
ApplicantHeinz Kurz
Product CodeETB · Ear, Nose, Throat
Decision DateAug 4, 1997
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 874.3450
Device ClassClass 2
AttributesTherapeutic, Pediatric

Intended Use

a. Bell Implants (Gold and Titanium) The KURZ Bell implants are intended for partial replacement of the ossicular chain to facilitate conduction of sound energy from the ear drum to the inner ear. The prostheses are implanted into the middle ear during a tympanoplasty procedure and are retained in the middle ear by the design configuration of the devices and the favorable biocompatible characteristics of gold and titanium. b. Angular Prosthesis (Plester) (Gold with Titanium Bands) The KURZ Angular Prosthesis is intended to bridge defects at the long incudal process and otherwise intact chain. The devices can be used on adults and children.

Device Story

KURZ Bell and Angular prostheses are middle-ear implants used during tympanoplasty to restore sound conduction. Bell implants consist of gold wire or titanium mesh plates with a bell-shaped end featuring slits; these are placed on the stapes head or arch to bridge the gap between the stapes and the eardrum or manubrium mallei. The Angular (Plester) prosthesis features a gold wire bell and two titanium bands that function as clamps to attach to the long incudal process. Surgeons manually bend and shape the implants to fit individual patient anatomy; the devices retain their shape post-placement. Titanium components provide firm bone connection. These single-use sterile implants benefit patients by reconstructing the ossicular chain, thereby facilitating sound energy transmission to the inner ear.

Clinical Evidence

No clinical data provided; substantial equivalence is based on design, material, and intended use similarities to legally marketed predicate devices.

Technological Characteristics

Materials: Gold and titanium. Design: Bell-shaped head with slits, stems available in 1/4mm increments, or angular stems with titanium clamping bands. Form factor: Bendable/shapeable to patient anatomy. Energy source: None (passive implant). Sterilization: Sterile packaging.

Indications for Use

Indicated for partial ossicular replacement in adults and children with interrupted sound conducting chain and intact, mobile stapes footplate, or for bridging defects at the long incudal process with otherwise intact mobile chain.

Regulatory Classification

Identification

A partial ossicular replacement prosthesis is a device intended to be implanted for the functional reconstruction of segments of the ossicular chain and facilitates the conduction of sound wave from the tympanic membrane to the inner ear. The device is made of materials such as stainless steel, tantalum, polytetrafluoroethylene, polyethylene, polytetrafluoroethylene with carbon fibers composite, absorbable gelatin material, porous polyethylene, or from a combination of these materials.

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ Image /page/0/Picture/2 description: The image shows the word "KURZ" inside of a circle. The word is written in a simple, sans-serif font, and the letters are slightly spaced apart. The circle is not a solid line, but rather a series of small dots or dashes, giving it a slightly rough or textured appearance. The overall impression is simple and slightly distressed. Heinz Kurz GmbH Medizintechnik Hausanschrift: Tübinger Straße 3 D-72144 Dußlingen Telefon (0 70 72) 91 79- Telefax (0 70 72) 91 79- AUG - 4 1997 Heinz Kurz GmbH · Medizintechnik · Postfach 39 · D-72142 Dußlingen 6. # 510(k) SUMMARY As required by Section 807.92(c) - Submitter | {807.92(a)(1)} (1) Dagmar S. Mäser Business Support International Tel. 011 - 31 - 20 - 428 9591 Amstel 320-1 Fax -428 9429 Amsterdam, 1017AP The Netherlands BusinessSupportInternational@compuserve.com e-mail - (2) Identification of Devices [807.92(a)(2)] Bell Prostheses (Various Models) Trade Names a. Angular Prosthesis (Plester) b. Common Name Partial Ossicular Replacement Prosthesis (PORP) Middle-Ear, Prosthesis, Partial Ossicular Replacement Classification Name Product Code 77 ETB Class 【 Regulatory Number 874 3450 #### Identification of Predicate Devices [807.92(a)(3)] (3) The KURZ Bell ossicular implants are substantially equivalent to partial ossicular devices of Smith & Nephew Richards, Bartlett, TN, USA and Xomed, Jacksonville, FL, USA (which also markets Ionos devices); the Angular (Plester) is substantially equivalent to S&N Richards Applebaum Prosthesis. These devices have been found substantially equivalent through the 510(k) premarket notification process. #### (4) Description of Device [807.92(a)(4)] - The implant consists of a golden wire rectangle or an Gold (Bell) extremely thin mesh plate with a structured outer surface and a stem which is available in 1/4mm incremental lengths. It ends in a 'bell' with miniscule slits. - The implant consists of a titanium mesh plate that is b. Titanium (Bell) textured on the surface that faces the tvmpanum. A bell with four slits and a textured inner side is located at the upper end of the shaft. 6-1 a. 「: 北京博彩图|彩 n {1}------------------------------------------------ ### Heinz Kurz GmbH Medizintechnik 510(k) Summary (Cont'd) (C - The Angular prosthesis (Plester) consists of a slit bell, Angular C. an angular stem (both Au), and two (2) titanium clamps at its end. The open ends of the titanium clamps are slightly staggered, so that they do not touch each other. The devices are implants for single patient use. They come in an individual sterile package in a sealed carton. #### (ട) Intended Use of Device [807.92(a)(5)] - a. Bell Implants (Gold and Titanium) The KURZ Bell implants are intended for partial replacement of the ossicular chain to facilitate conduction of sound energy from the ear drum to the inner ear. The prostheses are implanted into the middle ear during a tympanoplasty procedure and are retained in the middle ear by the design configuration of the devices and the favorable biocompatible characteristics of gold and titanium. - b. Angular Prosthesis (Plester) (Gold with Titanium Bands) The KURZ Angular Prosthesis is intended to bridge defects at the long incudal process and otherwise intact chain. The devices can be used on adults and children. #### Technological Characteristics (6) The implants can be bent and easily shaped to the individual conditions in the middle ear, yet hold their shape after placement. #### Information Bearing on the Safety and Effectiveness (7) The KURZ Bell and Angular partial ossicular replacement prostheses have the same intended use as predicate devices. There are no additional characteristics known that should adversely affect the safety and effectiveness of these implants. Signature | Do<br>16<br>1 1010 | ---------------------------------------------------------------------------------<br>---------------------------------------------------------------------------------------------------------<br>Company Company College of Art | 1<br>COMPA | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------<br>And Income of each and and any and any | |--------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | t | | | Dagmar S. Mäser Date 111/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11/11 {2}------------------------------------------------ 1234567890 897249. 510(k) Number Device Name ### INDICATIONS FOR USE: For bridging defects at the long incudal process in patients with otherwise intact mobile chain. The Angular prosthesis (Plester) consists of two titanium bands which are connected by a gold wire to the bell with its cross-shaped slits. The bands function as clamps and are positioned on the long incudal process. In cases of arrosion at the distal end of the long incudal process, the prosthesis allows the reconstruction of the continuity of the auditory ossicular chain. By slight lateral displacement of one end of the bands overclosure is possible. Titanium ensures a firm connection with the bone. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) | (Division Sign-Off) | | |-----------------------------------------------------------------------|---------| | Division of Reproductive, Abdominal, ENT,<br>and Radiological Devices | | | 510(k) Number | K912492 | | Prescription Use | <div> <img alt="Checkmark" src="checkmark.png"/> </div> | OR | Over-The-Counter Use | |-------------------|---------------------------------------------------------|----|----------------------| | (Per CFR 801 109) | | | | (Optional Formal 1-2-96) ్లు వ KRZ-ang.ind {3}------------------------------------------------ Image /page/3/Picture/0 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized representation of a human figure in profile, with three overlapping heads suggesting a sense of community and support. The text "DEPARTMENT OF HEALTH & HUMAN SERVICES USA" is arranged in a circular fashion around the figure. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 AUG - 4 1997 Dagmar S. Maser Business Support International Amstel 320-1················· 1017 AP Amsterdam The Netherlands Re: K972492 Partial Ossicular Replacement Prosthesis ... Dated: June 20, 1997 ..... ... Received: July 2, 1997 Regulatory class: II 21 CFR 874.3450/Procode: 77 ETB Dear Mr. Maser: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Tile 21. Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4613. Additionally, for question and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (30) 443-6597 or at its Internet address http://www.fda.gov/cdrk/dsmamain.huml". Sincercly yours, h.T.Liau Yin Lillian Yin, Ph.D. Director, Division of Reproductive, Abdominal, Ear, Nose and Throat, and Radiological Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {4}------------------------------------------------ | 510(k) Number | K972492 | |---------------|---------------------------| | Device Name | Bell Prosthesis (Partial) | ## INDICATIONS FOR USE: Ossicle replacement in case of interrupted sound conducting chain and intact, mobile stapes footplate. -------- The Bell Prosthesis is intended for partial replacement of the auditory ossicles. The bell is mounted on the head of the stapes, i.e. interposed between stapes and ear drum or stapes and manubrium mallei. Should stapes head no longer exist, bell is placed on intact arch of crus. (PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) R. Shep (Division Sign-Off) and Redictive, Abdominal, ENT, and Radiological De 510(k) Number K972492 Prescription Use (Per CFR 801 109) ાર Over-The-Counter Use _____________ (Optional Formal 1-2-96) 17 KRZ-USE.IND V
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...