← Product Code [EBZ](/submissions/DE/subpart-g%E2%80%94miscellaneous-devices/EBZ) · K061395 # CALSET COMPOSITE HEATER (K061395) _Addent, Inc. · EBZ · Jun 23, 2006 · Dental · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/DE/subpart-g%E2%80%94miscellaneous-devices/EBZ/K061395 ## Device Facts - **Applicant:** Addent, Inc. - **Product Code:** [EBZ](/submissions/DE/subpart-g%E2%80%94miscellaneous-devices/EBZ.md) - **Decision Date:** Jun 23, 2006 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 872.6070 - **Device Class:** Class 2 - **Review Panel:** Dental ## Indications for Use The Calset unit is used to warm dental composite materials and whitening bleach to130°F (54°C) or 155°F (68°C). It is also used to warm anesthetic carpules to 98°F (37°C) (body temperature). ## Device Story Calset Composite Heater is a dental warming device; consists of base unit with heating element, temperature control circuit with LED indicators, removable metal tray, and low voltage wall transformer. Device heats dental composite materials and whitening bleach to 130°F or 155°F; also warms anesthetic carpules to 98°F (body temperature). Used in dental clinic settings by dental professionals. Heating materials prior to use in mouth improves handling properties of composites and patient comfort for anesthetic delivery. ## Clinical Evidence No clinical data; bench testing only. ## Technological Characteristics Base unit with heating element, temperature control circuit, LED indicators, and removable metal tray. Powered by low voltage wall transformer. Three selectable temperature settings: 98°F (37°C), 130°F (54°C), and 155°F (68°C). ## Regulatory Identification An ultraviolet activator for polymerization is a device that produces ultraviolet radiation intended to polymerize (set) resinous dental pit and fissure sealants or restorative materials by transmission of light through a rod. ## Predicate Devices - Aesthetic Warmer (Product code EFC) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ Image /page/0/Picture/0 description: The image shows the text "JUN 2 3 2006" on the top left and "K06 1395" on the top right. Below the date is the word "ADDENT" with the text "510(k) SUMMARY" below it. The text is black and the background is white. Submitters Name: Joshua Friedman, D.D.S Address: AdDent, Inc 43 Miry Brook Rd. Danbury, CT 06810 Phone: (203) 778-0200 Fax: (203) 792-2275 Device Name: Calset Composite Heater Common Name: Composite Warmer Classification Name: Not officially classified Marketed Device of Equivalence: Aesthetic Warmer. Product code EFC, regulation number 872.6100 (exempt). ## Description of the Device: The Calset is a warming device used to heat dental materials prior to their use in the mouth. It consists of a base unit that contains a heating element a temperature control circuit with LED indicators, a removable metal tray that is designed to hold different materials and a low voltage wall transformer that provides power to the unit. Intended Use: The Calset unit is used to warm dental composite materials to 130°F (54°C) or 155°F (68°C). It is also used to warm anesthetic carpules to 98°F (37°C) (body temperature). Characteristics of the Calset Compared to Predicate Device: Both the Calset and the Anesthetic Warmer heat material that are in contact with the patient. The SE device heats anesthetic solution to body temperature (98°F). The Calset has three temperature settings 98°F (37°C), 130°F (54°C) or 155°F (68°C). The 98°F setting on the Calset is used together with a removable metal tray that holds anesthetic carpules. 1.00000000 C. L. Mira Ago tare a miller 2012 (1 2018 128 120 (18) 2019-19130000000 {1}------------------------------------------------ Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health and Human Services. The logo features a stylized eagle with its wings spread, enclosed within a circle. The text "DEPARTMENT OF HEALTH AND HUMAN SERVICES, USA" is arranged around the perimeter of the circle. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 JUN 2 3 2006 Joshua Friedman, DDS President AdDent, Incorporated 43 Miry Brook Road Danbury, Connecticut 06810 Re: K061395 Trade/Device Name: Calset Composite Heater Regulation Number: 21 CFR 872.6070 Regulation Name: Ultraviolet Activator for Polymerization Regulatory Class: II Product Codes: EBZ, EFC, and EEG Dated: May 17, 2006 Received: May 24, 2006 Dear Dr. Friedman: We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register. {2}------------------------------------------------ ## Page 2 - Joshua Friedman, DDS Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at (240) 276-0115. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (240) 276-3150 or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html Sincerely yours. Chiu S. Lin, PhD Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ ## INDICATIONS FOR USE KO 61395 510(k) Number (if known): Device Name: Calset Composite Heater Indications for Use: Intended Use: The Calset unit is used to warm dental composite materials and whitening bleach to130°F (54°C) or 155°F (68°C). It is also used to warm anesthetic carpules to 98°F (37°C) (body temperature). Prescription Use (Part 21 CFR 801 Subpart D) ✓ AND/OR Over-The-Counter Use (21 CFR 801 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE OF NEEDED) Su Concurrence of CDRH, Office of Device Evaluation (ODE) Don Sign-Off) on of Anesthesiology, General Hospital, dion Control, Dental Devices 2 --- **Source:** [https://fda.innolitics.com/submissions/DE/subpart-g%E2%80%94miscellaneous-devices/EBZ/K061395](https://fda.innolitics.com/submissions/DE/subpart-g%E2%80%94miscellaneous-devices/EBZ/K061395) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com