ORTHOSLENDERIZER
Device Facts
| Record ID | K111249 |
|---|---|
| Device Name | ORTHOSLENDERIZER |
| Applicant | Orthomatics, Inc. |
| Product Code | EFB · Dental |
| Decision Date | Feb 8, 2012 |
| Decision | SESE |
| Submission Type | Traditional |
| Regulation | 21 CFR 872.4200 |
| Device Class | Class 1 |
| Attributes | Therapeutic |
Intended Use
The OrthoSlenderizer is intended for use as a method of achieving interproximal enamel reduction of teeth using a reciprocal movement.
Device Story
OrthoSlenderizer is a dental handpiece accessory designed for interproximal enamel reduction (stripping). Device utilizes reciprocal movement to abrade enamel between teeth. Operated by dental professionals in clinical settings. Output is mechanical abrasion of tooth surfaces to create space for orthodontic alignment. Benefits include precise enamel removal to facilitate tooth movement.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Mechanical dental handpiece accessory; utilizes reciprocal motion for enamel reduction. No software, electronics, or specific material standards cited in the provided documentation.
Indications for Use
Indicated for interproximal enamel reduction of teeth in patients requiring orthodontic treatment.
Regulatory Classification
Identification
A dental handpiece and accessories is an AC-powered, water-powered, air-powered, or belt-driven, hand-held device that may include a foot controller for regulation of speed and direction of rotation or a contra-angle attachment for difficult to reach areas intended to prepare dental cavities for restorations, such as fillings, and for cleaning teeth.
Related Devices
- K053368 — INTERPROXIMAL REDUCTION SYSTEM · Dentsply International · Mar 29, 2006
- K221814 — OK Handpiece · Jaintek Co.,Ltd · Jul 15, 2022
- K971732 — DENTAL HANDPIECE · Pauline M. Nicholls · Jan 11, 2000
- K180648 — Park Dental Research Aligners · Park Dental Research Corporation · Jan 8, 2019
- K981990 — MRS-400, MAXI 400, MRSL-400, MAXI 400L · D.B.I. America Corp. · Jun 22, 1998
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a stylized eagle with three stripes forming its wing and tail feathers. The words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" are arranged in a circular fashion around the eagle.
Food and Drug Administration 10903 New Hampshire Avenue Document Control Room -WO66-G609 Silver Spring, MD 20993-0002
Dr. Paul A. Rocke Orthomatics, Incorporated 200 West County Line Road #340 Highlands Ranch, Colorado 80129
FEB - 8 2012
Re: K111249
Trade/Device Name: OrthoSlenderizer Regulation Number: 21 CFR 872.4200 Regulation Name: Dental Handpiece and Accessories Regulatory Class: I Product Code: EFB Dated: April 21, 2011 Received: February 6, 2012
Dear Dr. Rocke:
We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. Please note: CDRH does not evaluate information related to contract liability warranties. We remind you, however, that device labeling must be truthful and not misleading.
If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Eederal Register.
{1}------------------------------------------------
Page 2- Dr. Rocke
Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please go to http://www.fda.gov/AboutFDA/CentersOffices/CDRH/ CDRHOffices/ucm115809.htm for the Center for Devices and Radiological Health's (CDRH's) Office of Compliance. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please go to http://www.fda.gov/MedicalDevices/Safety/ReportaProblem/default.htm for the CDRH's Office of Surveillance and Biometrics/Division of Postmarket Surveillance.
You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 796-7100 or at its Internet address http://www.fda.gov/MedicalDevices/Resourcesfor You/Industry/default.htm.
Sincerely yours,
Susan Runnee
Anthony D. Watson, B.S., M.S., M.B.A. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
111249
## Intended Use
The OrthoSlenderizer is intended for use as a method of achieving interproximal enamel reduction of teeth using a reciprocal movement.
Susan Rummer
(Division Sign-Off) (Division Sign-Dit)
Division of Anesthesiology, General Hospital
Division of Anesthesiology, General Devices Division of Anoothoon Control, Devices
510(k) Number: k111249
