PROCERA ZIRCONIA ABUTMENT FOR CAMLOG IMPLANT SYSTEM

K061529 · Nobel Biocare AB · NHA · Aug 23, 2006 · Dental

Device Facts

• Record ID: K061529
• Device Name: PROCERA ZIRCONIA ABUTMENT FOR CAMLOG IMPLANT SYSTEM
• Applicant: Nobel Biocare AB
• Product Code: NHA · Dental
• Decision Date: Aug 23, 2006
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 872.3630
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Nobel Biocare's Procera Zirconia Abutment is a premanufactured prosthetic component intended for use as an aid in prosthetic rehabilitation. Nobel Biocare's Procera Zirconia Abutments fit the following endosseous implants: Camlog 3.3, 3.8, 4.3, 5.0, 6.0 mm

Device Story

Procera Zirconia Abutment is a premanufactured prosthetic component for dental implant systems. Device serves as an interface between endosseous dental implant and final dental restoration. Fabricated via custom design process to match patient-specific anatomical requirements. Used by dental professionals in clinical settings to facilitate prosthetic rehabilitation. Provides structural support for dental crowns or bridges. Benefits include precise fit and functional restoration of dentition.

Clinical Evidence

No clinical data provided; substantial equivalence based on design, material, and intended use similarities to legally marketed predicate devices.

Technological Characteristics

Material: Zirconia. Form factor: Custom-fabricated prosthetic abutment. Compatibility: Camlog endosseous dental implants (3.3mm to 6.0mm diameters).

Indications for Use

Indicated for patients requiring prosthetic rehabilitation using Camlog endosseous dental implants (diameters 3.3, 3.8, 4.3, 5.0, 6.0 mm).

Regulatory Classification

Identification

An endosseous dental implant abutment is a premanufactured prosthetic component directly connected to the endosseous dental implant and is intended for use as an aid in prosthetic rehabilitation.

Special Controls

*Classification.* Class II (special controls). The guidance document entitled “Class II Special Controls Guidance Document: Root-Form Endosseous Dental Implants and Endosseous Dental Implant Abutments” will serve as the special control. (See § 872.1(e) for the availability of this guidance document.)

Predicate Devices

• Procera Abutment Octagon (K041275)
• Procera Abutment Brånemark (K042658)
• Altatec Camlog Screwline Implant System (K022425)

Submission Summary (Full Text)

{0}------------------------------------------------

K06 1529

## 1.4 510(k) Summary of Safety and Effectiveness

| Submitted by: | Phuong Nguyen Son<br>Regulatory Affairs Specialist | AUG 23 2006 |
|----------------------------------------|---------------------------------------------------------------------------------------------------------------------------------|-------------|
| Address: | Nobel Biocare USA LLC<br>22715 Savi Ranch Parkway<br>Yorba Linda, CA 92887 | |
| Telephone: | [phone], ext. 7830 | |
| Facsimile: | [phone] | |
| Date of Submission: | June 1, 2006 | |
| Classification Name: | Endosseous Dental Implant Abutment (21 CFR 872.3630) | |
| Trade or Proprietary<br>or Model Name: | Procera Titanium Abutment for Camlog Implant System | |
| Legally Marketed Device(s): | Procera Abutment Octagon (K041275)<br>Procera Abutment Brånemark (K042658)<br>Altatec Camlog Screwline Implant System (K022425) | |

## Device Description:

Nobel Biocare's Procera Zirconia Abutment for Camlog Implant System is fabricated to the exact shape, size, and specifications determined in the design process in order to achieve a personalized device that fits precisely, and properly functions, according to each patient's individual needs.

Nobel Biocare's Procera Zirconia Abutment for Camlog Implant System is similar in design, intended use, and operation to the abutments cleared in predicate devices.

## Indications for Use:

Nobel Biocare's Procera Zirconia Abutment is a premanufactured prosthetic component intended for use as an aid in prosthetic rehabilitation. Nobel Biocare's Procera Zirconia Abutments fit the following endosseous implants:

| Camlog 3.3, 3.8, 4.3, 5.0, 6.0 mm

{1}------------------------------------------------

Image /page/1/Picture/1 description: The image shows the seal of the Department of Health and Human Services (HHS) of the United States. The seal features a stylized eagle with three heads, representing the department's focus on health, human services, and well-being. The eagle is surrounded by the words "DEPARTMENT OF HEALTH AND HUMAN SERVICES. USA" in a circular arrangement.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

AUG 2 3 2006

Nobel Biocare AB C/O Ms. Phuong Nguyen Son Regulatory Affairs Specialist Nobel Biocare USA, LLC 22715 Savi Ranch Parkway Yorba Linda, California 92887

Re: K061529

Trade/Device Name: Procera Zirconia Abutment for Camlog Implant System Regulation Number: 872.3630 Regulation Name: Endosseous Dental Implant Abutment Regulatory Class: II Product Code: NHA Dated: June 1, 2006 Received: June 12, 2006

Dear Ms. Son:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{2}------------------------------------------------

## Page 2 - Ms. Son

ﺎﻧ

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

This letter will allow you to begin marketing your device as described in your Section 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours,

Suette y. Michael Davis

Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{3}------------------------------------------------

K061539 510(k) Number (if known):

Device Name: Procera Zirconia Abutment for Camlog Implant System

Indications For Use:

Nobel Biocare's Procera Zirconia Abutment is a premanufactured prosthetic component intended for use as an aid in prosthetic rehabilitation. Nobel Biocare's Procera Zirconia Abutments fit the following endosseous implants:

– Camlog 3.3, 3.8, 4.3, 5.0, 6.0 mm

× Prescription Use (Part 21 CFR 801 Subpart D) AND/OR

Over-The-Counter Use (21 CFR 807 Subpart C)

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Susan Runne

on of Anesthesiology, General Hospital, con Control, Dental Devices

Page 1 of _1 _________________________________________________________________________________________________________________________________________________________________

1) Number: K061529

1.3