TEMPORARY C&B COMPOSITE

K091894 · Voco GmbH · EBG · Jul 23, 2009 · Dental

Device Facts

• Record ID: K091894
• Device Name: TEMPORARY C&B COMPOSITE
• Applicant: Voco GmbH
• Product Code: EBG · Dental
• Decision Date: Jul 23, 2009
• Decision: SESE
• Submission Type: Special
• Regulation: 21 CFR 872.3770
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

Temporary C&B composite is a fluorescent cold polymerising pastepaste system for the production of temporary crowns, bridges, inlays and onlays. Temporary C&B composite consists of base paste and catalyst paste.

Device Story

Temporary C&B composite is a two-component (base and catalyst paste) cold-polymerizing dental material. Used by dental professionals in clinical settings to fabricate temporary crowns, bridges, inlays, and onlays. The material is applied to a dental impression or matrix, allowed to polymerize, and then shaped to restore temporary function and aesthetics for the patient. It provides a temporary solution while permanent restorations are being manufactured.

Clinical Evidence

No clinical data provided; bench testing only.

Technological Characteristics

Cold-polymerizing, two-paste (base and catalyst) composite resin system. Fluorescent properties included. Formulated for manual mixing and application in dental restorative procedures.

Indications for Use

Indicated for the production of temporary crowns, bridges, inlays, and onlays in dental patients requiring temporary restorations.

Regulatory Classification

Identification

A temporary crown and bridge resin is a device composed of a material, such as polymethylmethacrylate, intended to make a temporary prosthesis, such as a crown or bridge, for use until a permanent restoration is fabricated.

Submission Summary (Full Text)

{0}------------------------------------------------

Image /page/0/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features a stylized eagle with its wings spread, and the words "DEPARTMENT OF HEALTH & HUMAN SERVICES. USA" are arranged around the eagle in a circular fashion. The eagle is black, and the text is also black. The background is white.

Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Dr. T. Gerkensmeier Regulatory Affairs VOCO GmbH Anton-Flettner-Strasße 1-3 D-27472 Cuxhaven GERMANY

JUL 2 3 2009

Re: K091894

Trade/Device Name: Temporary C&B Composite Regulation Number: 21 CFR 872.3770 Regulation Name: Temporary Crown and Bridge Resin Regulatory Class: II Product Code: EBG Dated: June 22, 2009 Received: June 24, 2009

Dear Dr. Gerkensmeier:

We have reviewed your Section 510(k) premarket notification of intent to market the device referenced above and have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act) that do not require approval of a premarket approval application (PMA). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.

If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 898. In addition, FDA may publish further announcements concerning your device in the Federal Register.

{1}------------------------------------------------

## Page 2 - Dr. Gerkensmeier

Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements of the Act or any Federal statutes and regulations administered by other Federal agencies. You must comply with all the Act's requirements, including, but not limited to: registration and listing (21 CFR Part 807); labeling (21 CFR Part 801); medical device reporting (reporting of medical device-related adverse events) (21 CFR 803); good manufacturing practice requirements as set forth in the quality systems (QS) regulation (21 CFR Part 820); and if applicable, the electronic product radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), please contact the Center for Devices and Radiological Health's (CDRH's) Office of Compliance at [phone]. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). For questions regarding the reporting of adverse events under the MDR regulation (21 CFR Part 803), please contact the CDRH/Office of Surveillance and Biometrics/Division of Postmarket Surveillance at 240-276-3464. For more information regarding the reporting of adverse events, please go to http://www.fda.gov/cdrh/mdr/.

You may obtain other general information on your responsibilities under the Act from the Division of Small Manufacturers, International and Consumer Assistance at its toll-free number [phone] or [phone] or at its Internet address http://www.fda.gov/cdrh/industry/support/index.html.

Sincerely yours,

pt

Susan Runner, D.D.S., M.A. Acting Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health

Enclosure

{2}------------------------------------------------

## Indications for Use Statement

510(k) Number:

K091894

Device Name: Temporary C&B composite

Indications for Use:

Temporary C&B composite is a fluorescent cold polymerising pastepaste system for the production of temporary crowns, bridges, inlays and onlays. Temporary C&B composite consists of base paste and catalyst paste.

Prescription Use

OR

Over-The-Counter Use

(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED)

Concurrence of CDRH, Office of Device Evaluation (ODE)

Kein Mulig for MSR

(Division Sign-Off) Division of Anesthesiology, General Hospital Intection Control, Dental Devices

510(k) Number: K091894