K962829 · Harmac Medical Products, Inc. · DQO · Oct 16, 1997 · Cardiovascular
Device Facts
Record ID
K962829
Device Name
HARMAC BALLOON ANGIOGRAPHIC CATHETER
Applicant
Harmac Medical Products, Inc.
Product Code
DQO · Cardiovascular
Decision Date
Oct 16, 1997
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 870.1200
Device Class
Class 2
Indications for Use
The Balloon Angiographic catheter is indicated for use in right heart catheterization for cardiac angiography, and measurement of the right heart and pulmonary artery pressures. It can be used to inject radiopaque media and measure pressures in any chamber or vessel that can be entered from the right heart.
Device Story
Balloon Angiographic Catheter used for right heart catheterization; enables cardiac angiography and pressure monitoring in right heart chambers and pulmonary artery. Device facilitates injection of radiopaque contrast media. Operated by clinicians in hospital settings. Provides pressure data to assist in hemodynamic assessment and diagnostic imaging. Benefits include minimally invasive access to cardiac chambers for diagnostic pressure measurement and visualization.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Balloon-tipped catheter for vascular access and pressure monitoring. Materials and dimensions standard for angiographic catheters. No software or electronic components.
Indications for Use
Indicated for right heart catheterization, cardiac angiography, and pressure measurement in right heart chambers and pulmonary artery. Applicable to any vessel accessible from the right heart. Contraindicated for uses other than those specified.
Regulatory Classification
Identification
An intravascular diagnostic catheter is a device used to record intracardiac pressures, to sample blood, and to introduce substances into the heart and vessels. Included in this generic device are right-heart catheters, left-heart catheters, and angiographic catheters, among others.
Related Devices
K963248 — FLOW DIRECTED THERMODILUTION/INFUSION BALLOON CATHETER (575-110P) · J-Lloyd Medical, Inc. · Feb 3, 1997
K213666 — NuCath Wedge Pressure Catheter · Pfm Medical, Inc. · Oct 6, 2022
K963335 — HARMAC BALLOON WEDGE PRESSURE CATHETER · Harmac Medical Products, Inc. · Oct 16, 1997
K112452 — ANGIODYNAMICS SOFT-VU ANGIOGRAPHIC CATHETERS · AngioDynamics, Inc. · Mar 30, 2012
K014054 — EDWARDS LIFESCIENCES SWAN-GANZ MONITORING CATHETER WITH OLIGON MATERIAL · Edwards Lifesciences, LLC · Mar 8, 2002
Submission Summary (Full Text)
{0}
DEPARTMENT OF HEALTH & HUMAN SERVICES
Public Health Service
OCT 16 1997
Food and Drug Administration
9200 Corporate Boulevard
Rockville MD 20850
Mr. Michael Guzzo
Quality Assurance Engineer
Harmac Medical Products, Inc.
2201 Bailey Avenue
Buffalo, New York 14211-1797
Re: K962829
Harmac Balloon Angiographic Catheter
Regulatory Class: II (two)
Product Code: DQO
Dated: August 22, 1997
Received: August 29, 1997
Dear Mr. Guzzo:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
{1}
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for *in vitro* diagnostic devices), please contact the Office of Compliance at (301) 594-4648. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,

Thomas J. Callahan, Ph.D.
Director
Division of Cardiovascular and Respiratory Devices
Office of Device Evaluation
Center for Devices and Radiological Health
Enclosure
{2}
# INDICATIONS FOR USE
510(K) Number: K962829
Device Name: Harmac Balloon Angiographic Catheter
Indications for Use:
"The Balloon Angiographic catheter is indicated for use in right heart catheterization for cardiac angiography, and measurement of the right heart and pulmonary artery pressures. It can be used to inject radiopaque media and measure pressures in any chamber or vessel that can be entered from the right heart."
Contraindications:
"This device is not designed, sold, or intended for use except as indicated."
PLEASE DO NOT WRITE BELOW THIS LINE - CONTINUE ON ANOTHER PAGE IF NEEDED
Concurrence of CDRH, Office of Device Evaluation
Tara A. Ryn
(Division Signor)
Division of
and Neurologic
510(k) Number K962829
Prescription Use ☑
(Per 21 CFR 801.109)
OR
Over-The-Counter Use
Harmac Medical Products, Inc.
K962829
Attachment 4
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.