K993789 · General Air Service and Supply · CHL · Jan 10, 2000 · Clinical Chemistry
Device Facts
Record ID
K993789
Device Name
CLINICAL BLOOD GAS MIXTURE
Applicant
General Air Service and Supply
Product Code
CHL · Clinical Chemistry
Decision Date
Jan 10, 2000
Decision
SESE
Submission Type
Traditional
Regulation
21 CFR 862.1120
Device Class
Class 2
Indications for Use
Clinical Blood Gas Mixtures are intended for use as calibration gases for research and Blood Gas Analyzers.
Device Story
Clinical Blood Gas Mixture is a gas calibration standard used to calibrate blood gas analyzers. It serves as a reference material to ensure the accuracy of clinical diagnostic equipment. The device is used in clinical laboratory settings or research environments by laboratory technicians or clinicians. By providing a known gas concentration, it allows the analyzer to adjust its internal measurements, ensuring precise patient blood gas analysis. This calibration process is essential for the reliable assessment of patient respiratory and metabolic status.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Gas mixture for calibration purposes. No specific materials, energy sources, or software algorithms described.
Indications for Use
Indicated for use as calibration gases for research and Blood Gas Analyzers.
Regulatory Classification
Identification
A blood gases (PCO2 , PO2 ) and blood pH test system is a device intended to measure certain gases in blood, serum, plasma or pH of blood, serum, and plasma. Measurements of blood gases (PCO2 , PO2 ) and blood pH are used in the diagnosis and treatment of life-threatening acid-base disturbances.
Related Devices
K033643 — CO2 CALIBRATOR/DILUENT · Bayer Healthcare, Diagnostics Division · Jan 8, 2004
K962864 — THB CAL STANDARD FOR IL CO-OXIMETERS/OXIMETERS · Alko Diagnostic Corp. · Dec 18, 1996
K973544 — VACU*MED, GOLD EDITION CARBON DIOXIDE GAS ANALYZER · Vacumed, Div. of Vacumetrics, Inc. · May 26, 1998
K974526 — EASYBLOOD GAS ANALYZER · Medica Corp. · Feb 5, 1998
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image shows the seal of the Department of Health & Human Services - USA. The seal is circular and contains the department's name around the perimeter. In the center of the seal is an abstract image of an eagle.
Food and Drug Administration 2098 Gaither Road Rockville MD 20850
## JAN 1 0 2000
Mr. Michael Fisher Safety Coordinator General Air Service & Supply 6330 Colorado Boulevard Commerce City, Colorado 80022
Re: K993789
> Trade Name: Clinical Blood Gas Mixture Regulatory Class: II Product Code: CHL Dated: October 26, 1999 Received: November 9, 1999
Dear Mr. Fisher:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food. Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (OS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic OS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations.
{1}------------------------------------------------
Page 2
Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at (770) 488-7655.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification"(21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597, or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html".
Sincerely yours,
Steven Putman
Steven I. Gutman, M.D, M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
Image /page/2/Picture/0 description: The image shows the logo for "General Air". The text is in a bold, sans-serif font. A curved line extends over the "Air" portion of the logo, adding a dynamic element to the design.
Page 1 of 1
510 (k) NUMBER (IF KNOWN) : K993789
DEVICE NAME: Clinical Blood Gas Mixture
INDICATIONS FOR USE:
Clinical Blood Gas Mixtures are intended for use as calibration gases for research and Blood Gas Analyzers.
Stevin Cooper
ision Sign vices vision of Clinical Laboratory 510(k) Number .
(PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED.)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Prescription Use (Per 21 CFR 801.109)
OR
Over-The-Counter-Use (Optional Format 1-2-96)
BOULDER, CO 80301-2524 3750 WALNUT STREET (303) 444-2138 FAX (B03) 440-7730
DENVER, CO 80204-3399 1105 ZUNI STREET (303) 892-7003 FAX (303) 595-9036
FT. COLLINS, CO 80524-2723 1918 HEATH PKWY. (970) 221-0697 FAX (303) 572-8256
GREELEY, CO 80631-5931 1700 1ST AVENUE (970) 353-5224 FAX (303) 825-0906
LITTLETON, CO 80120 4901 RIO GRANDE (303) 797-0204 FAX (303) 797-0649
Look us up on the World Wide Web: www.generalair.com
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.
Sort by:
Create Alert
Search Filters
Agent Token
Create a read-only bearer token for Claude, ChatGPT, or other agents that can call HTTP APIs.