← Product Code [CCL](/submissions/AN/subpart-b%E2%80%94diagnostic-devices/CCL) · K040484 # MAXO2+, MODEL A AND AE (K040484) _Maxtec, Inc. · CCL · Jun 9, 2004 · Anesthesiology · SESE_ **Canonical URL:** https://fda.innolitics.com/submissions/AN/subpart-b%E2%80%94diagnostic-devices/CCL/K040484 ## Device Facts - **Applicant:** Maxtec, Inc. - **Product Code:** [CCL](/submissions/AN/subpart-b%E2%80%94diagnostic-devices/CCL.md) - **Decision Date:** Jun 9, 2004 - **Decision:** SESE - **Submission Type:** Traditional - **Regulation:** 21 CFR 868.1720 - **Device Class:** Class 2 - **Review Panel:** Anesthesiology ## Intended Use The MAXO2+ is intended as a tool for use by qualified personnel to spot-check or measure oxygen concentration of a delivered air/ oxygen mixture. The MAXO2+ is not intended for use in continuous monitoring of oxygen delivery to a patient. ## Device Story MAXO2+ is a handheld oxygen analyzer utilizing a MAX-250 oxygen sensor to measure oxygen concentration in air/oxygen mixtures. Operated by qualified personnel in hospitals, home care, transport, and sub-acute settings for spot-checking. Device provides digital readout of oxygen concentration; assists clinicians in verifying gas delivery mixtures. Not intended for continuous monitoring or MRI environments. ## Clinical Evidence No clinical data provided; bench testing only. ## Technological Characteristics Oxygen analyzer utilizing MAX-250 galvanic oxygen sensor. Handheld form factor. Standalone device. No software-based algorithmic processing described. ## Regulatory Identification An oxygen gas analyzer is a device intended to measure the concentration of oxygen in respiratory gases by techniques such as mass spectrometry, polarography, thermal conductivity, or gas chromatography. This generic type of device also includes paramagnetic analyzers. ## Predicate Devices - Caradyne - OxiCheck - [K023565](/device/K023565.md) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ Maxtec, Inc K040484 MAXO₂ 510(k) NOTIFICATION - 9 2004 ## Section 1 - 510(k) Summary of Safety and Effectiveness Non-Confidential Summary of Safety and Effectiveness February 19, 2004 Page 1 of 3 Maxtec, Inc 6526 S. Cottonwood Street Salt Lake City, UT 84107 U.S.A. Phone: (801) 266-5300 (801) 270-5590 Fax: | Official Contact: | Gordon R. Roth - Quality System Manager | |----------------------------|-----------------------------------------| | Proprietary or Trade Name: | MAXO2+ | | Common/Usual Name: | Oxygen Analyzer | | Classification Name: | Analyzer, Gas, Oxygen, Gaseous Phase | | Predicate Device: | Caradyne - OxiCheck - K023565 | #### Device Description: The MAXO2+ A(E) oxygen analyzer is a member of Maxtec's MAXO2 analyzer line of oxygen analyzers and monitors. It utilizes the MAX-250 oxygen sensor and is engineered for long life, maximum reliability and stable performance. ### Intended Use: The MAXO2+ is intended as a tool for use by qualified personnel to spot-check or measure oxygen concentration of a delivered air/ oxygen mixture. The MAXO2+ is not intended for use in continuous monitoring of oxygen delivery to a patient. ### Environment of Use: The MAXO2+ is intended for use in Hospitals, Home Care, Transport, and Sub-acute Institutions. The MAXO2+ is not intended for use in a MRI environment. {1}------------------------------------------------ Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the words "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter. Inside the circle is an abstract symbol resembling an eagle or bird in flight, composed of three curved lines. Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 JUN - 9 2004 Mr. Gordon R. Roth Quality System Manager Maxtec. Incorporated 6526 South Cottonwood Street Salt Lake City, Utah 84107 Re: K040484 Trade/Device Name: MAX02+ Model "A" and "AE" Regulation Number: 868.1720 Regulation Name: Oxygen Gas Analyzer Regulatory Class: II Product Code: CCL Dated: May 25, 2004 Received: May 26, 2004 Dear Mr. Roth: We have reviewed your Section 510(k) premarket notification of intent to market the device we nave roviewed your betermined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device mendments, or to devices that have been reclassified in accordance with the provisions of /incentinents, or to are rood Cosmetic Act (Act) that do not require approval of a premarket the redelar 1 000; Drag). You may, therefore, market the device, subject to the general approvial applicans of the Act. The general controls provisions of the Act include controls providens of an annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (PMA), it may be subject to such additional controls. Existing major regulations affecting (1 Mrx), it may of such of Federal Regulations, Title 21, Parts 800 to 898. In your device can be found in further announcements concerning your device in the Federal Register. {2}------------------------------------------------ Page 2 - Mr. Roth Please be advised that FDA's issuance of a substantial equivalence determination does not mean that FDA has made a determination that your device complies with other requirements Incan that I DA mas made a statutes and regulations administered by other Federal agencies. of the Act of ally I outeral timated including, but not limited to: registration r ou intist comply wan and 807); labeling (21 CFR Part 801); good manufacturing practice and fishing (21 CF Real 80%), systems (QS) regulation (21 CFR Part 820); and if requirenches as bet form inroduct radiation control provisions (Sections 531-542 of the Act); 21 CFR 1000-1050. This letter will allow you to begin marketing your device as described in your Section 510(k) This letter wifi and in J . The FDA finding of substantial equivalence of your device to a premaired predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801), If you desire specific at Compliance at (301) 594-4646. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21CFR Part 807.97). You may obtain other general information on your responsibilities under the Act from the may obtain of Small Manufacturers, International and Consumer Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its Internet address http://www.fda.gov/cdrh/dsma/dsmamain.html Sincerely yours, Carls Chiu Lin, Ph.D. Director Division of Anesthesiology, General Hospital, Infection Control and Dental Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ # Maxtec, Inc Statement of Indications for Use MAXO2+ 510(k) Number (if known): _ Ko4 o 40 40 4 Device Name: ----------------------------------------------------------------------------------------------------------------------------------------------------------------- Indications for Use: -------------------------------------- The MAXO2+ is intended as a tool for use by qualified personnel to spot-check or measure oxygen concentration of a delivered air/ oxygen mixture The MAXO2+ is not intended for use in continuous monitoring of oxygen delivery to a patient. Prescription Use X (Part 21 CFR 801 Subpart D) AND/OR Over-The-Counter Use (21 CFR 807 Subpart C) (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) Quytlepour (Division Sign-Off) Division of Anesthesiology, General Hospital, Infection Control, Dental Devices 510(k) Number:________________________________________________________________________________________________________________________________________________________________ --- **Source:** [https://fda.innolitics.com/submissions/AN/subpart-b%E2%80%94diagnostic-devices/CCL/K040484](https://fda.innolitics.com/submissions/AN/subpart-b%E2%80%94diagnostic-devices/CCL/K040484) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com