POLYPROPYLENE

K993997 · Trading Consultants and Distributors Intl., Inc. · GAW · Feb 4, 2000 · General, Plastic Surgery

Device Facts

• Record ID: K993997
• Device Name: POLYPROPYLENE
• Applicant: Trading Consultants and Distributors Intl., Inc.
• Product Code: GAW · General, Plastic Surgery
• Decision Date: Feb 4, 2000
• Decision: SESE
• Submission Type: Traditional
• Regulation: 21 CFR 878.5010
• Device Class: Class 2
• Attributes: Therapeutic

Intended Use

POLYPROPYLENE is indicated for use in general soft tissue approximation and/or ligation, including use in cardiovascular, ophthalmic and neurological procedures.

Device Story

POLYPROPYLENE is a sterile, nonabsorbable surgical monofilament suture made from long-chain polyolefin polymer (polypropylene). It is used by surgeons for soft tissue approximation and ligation in cardiovascular, ophthalmic, and neurological procedures. The suture is provided as a monofilament thread, either undyed or dyed with FDA-listed color additives (D&C Blue No. 6 or [Phthalocyaninato(2-)] copper), and may be supplied with or without attached surgical needles. The device is intended for single use. It functions by providing mechanical tissue support; it does not undergo significant changes in tensile strength in vivo. The device is sterilized via gamma irradiation.

Clinical Evidence

No clinical data. Substantial equivalence is supported by non-clinical bench testing demonstrating conformance to U.S.P. standards for nonabsorbable surgical sutures, including physical properties, tensile strength, and needle attachment strength.

Technological Characteristics

Material: Long-chain polyolefin polymer (polypropylene). Form: Monofilament thread. Sterilization: Gamma irradiation. Standards: U.S.P. monograph for Nonabsorbable Surgical Suture, ISO 9002, EN 46002, EN 552. Packaging: Aluminum foil and polyester. Connectivity: None (mechanical device).

Indications for Use

Indicated for general soft tissue approximation and/or ligation in cardiovascular, ophthalmic, and neurological procedures. Prescription use only.

Regulatory Classification

Identification

Nonabsorbable polypropylene surgical suture is a monofilament, nonabsorbable, sterile, flexible thread prepared from long-chain polyolefin polymer known as polypropylene and is indicated for use in soft tissue approximation. The polypropylene surgical suture meets United States Pharmacopeia (U.S.P.) requirements as described in the U.S.P. Monograph for Nonabsorbable Surgical Sutures; it may be undyed or dyed with an FDA approved color additive; and the suture may be provided with or without a standard needle attached.

Special Controls

*Classification.* Class II (special controls). The special control for this device is FDA's “Class II Special Controls Guidance Document: Surgical Sutures; Guidance for Industry and FDA.” See § 878.1(e) for the availability of this guidance document.

Predicate Devices

• Surgilene® Non-Absorbable Polypropylene Surgical Sutures (Davis & Geck) (K945701)
• Prolene® Nonabsorbable Polypropylene Surgical Suture (Ethicon, Inc.)

Submission Summary (Full Text)

{0}------------------------------------------------

#### 4 2000 FEB

# K 993997

T.CAD International 990929/MG-510(k) POLYPROPYLENE

## SECTION III

# 510(K) Summary of Safety and Effectiveness

This summary of safety and effectiveness information is being submitted in accordance with the requirements of the Safe Medical Devices Act (SMDA) of 1990 and Title 21 CFR §807.92

#### A. Applicant & Submitted By:

Trading Consultants And Distributors International Inc.
(T.CAD International)
157 WindDance Dr.
Chicago, IL 60046-6681
Telephone: [phone]
Fax.: [phone]

| Contact Person: | Main M. Ghazal, President |
|-----------------|---------------------------|
| Date Prepared: | September 29th 1999. |

#### B. Device Name:

- Trade Name: POLYPROPYLENE a.
- b. Common or Usual Name: Polypropylene Surgical Suture
- Classification Name: Nonabsorbable Polypropylene Surgical Suture C. (Per 21CFR878.5010)

### C. Predicate Device:

Surgilene® Non-Absorbable Polypropylene Surgical Sutures (Davis & Geck) (K945701)

Prolene® Nonabsorbable Polypropylene Surgical Suture (Ethicon, Inc.)

#### D. Device Description:

- e. POLYPROPYLENE is a nonabsorbable sterile surgical monofilament suture composed of flexible thread prepared from Long-chain polyolefin polymer known as polypropylene and is indicated for use in general soft tissue approximation and/or ligation, including use in cardiovascular, ophthalmic and neurological procedures. POLYPROPYLENE meets all requirements as described in the United States Pharmacopeia (U.S.P.) monograph for Nonabsorbable Surgical Suture. Offered as monofilament in form, it maybe offered undyed or dyed with an FDA listed color additive, either D&C Blue No. 6, (21CFR74.3106) or D&C Blue No. 6 (21CFR74.3106) or [Phthalocyaninato(2-)] copper (21CFR74.3045). It will be offered with or without standard needles attached.

{1}------------------------------------------------

T.CAD International 990929/MG-510(k) POLYPROPYLENE

## E. Intended Use:

POLYPROPYLENE is indicated for use in general soft tissue approximation and/or ligation, including use in cardiovascular, ophthalmic and neurological procedures.

## F. Comparison to Predicate Device:

| | POLYPROPYLENE | Predicate Device |
|----------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------|
| Intended Use | General soft tissue approximation<br>and/or ligation, including use in<br>cardiovascular, ophthalmic and<br>neurological procedures. | General soft tissue approximation<br>and /or ligation, including use in<br>cardiovascular, ophthalmic and<br>neurological procedures. |
| Suture Material | Long-chain polyolefin polymer<br>known as polypropylene | Long-chain polyolefin polymer<br>known as polypropylene |
| Suture<br>Characteristics | Not absorbed and no significant<br>change in tensile strength retention<br>known to occur in vivo. | Not absorbed and no significant<br>change in tensile strength retention<br>known to occur in vivo. |
| Sterilization Method | Gamma Irradiation | Same or equivalent process |
| How Supplied | Monofilament thread, undyed or<br>dyed with an FDA listed color<br>additive. Sterile and offered for<br>Single Use Only. Available with<br>or without surgical needle. | Same |
| Suture Diameter,<br>Suture Length,<br>Knot Pull Tensile<br>Strength and Needle<br>Attachment<br>Strength | Meet U.S.P. Requirements | Meet U.S.P. Requirements |
| Packaging | Dry packaged in Aluminum Foil<br>and Polyester tear open packaging. | Same or equivalent manner. |
| Labeling | In conformance with CDRH<br>instructions of the "Medical<br>Device Quality Manual" dated<br>December 1996. Package Inserts<br>in accordance with the FDA<br>Guidance documents " Alternate<br>Suture Labeling" Resulting from<br>the January 11th 1993 meeting with<br>HIMA, reformatted on December<br>17th 1997. | Same |

{2}------------------------------------------------

大 793497

T.CAD International 990929/MG-510(k) POLYPROPYLENE

#### G. Clinical & Non-Clinical Testing:

Non-Clinical Testing was conducted on the subject device to prove conformance to the requirements of U.S.P. standards and to demonstrate substantial equivalence to the predicate device. Physical properties and functionality testing assured the safety and effectiveness of the subject device within its intended uses. Results of the non-clinical testing demonstrate conformance with the U.S.P. standards and requirements for Absorbable surgical suture.

Clinical Testing: Not available at the present time.

#### H. Conclusion:

Based on the technological characteristics and physical properties of the device, the device description, the intended use of the device, and conformance with voluntary performance standards like:

- a. United States Pharmacopeia Standards
- b. ISO 9002, EN 46002 & EN 552 Standards
- c. FDA Guidance documents "Alternate Suture Labeling" Resulting from the January 11th 1993 meeting with HIMA.

T.CAD International believes that the subject device demonstrates a substantial equivalence to the predicate device.

{3}------------------------------------------------

Image /page/3/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo features a stylized eagle with three lines forming its body and wings. The eagle is encircled by the text "DEPARTMENT OF HEALTH & HUMAN SERVICES-USA" in a circular arrangement.

Public Health Service

FEB 4 2000 Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850

Mr. Main M. Ghazal Trading Consultants and Distributors International, Inc. 157 WindDance Drive Chicago, Illinois 60046-6681

Re: K993997 Trade Name: Polypropylene Regulatory Class: II Product Code: GAW Dated: November 22, 1999 Received: November 24, 1999

Dear Mr. Ghazal:

We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices that were regulated as transitional devices and that have been reclassified into class II. Notice of this reclassification was published in the Federal Register on Friday, May 31, 1991 (Vol. 56, No. 105, Pages 24684 and 24685). A copy of this Federal Register can be obtained by calling the Division of Small Manufacturers Assistance (DSMA) at [phone] or [phone]. You may, therefore, market the device, subject to the general controls provisions of the Federal Food, Drug, and Cosmetic Act (Act) and the following limitations:

- The Polypropylene Suture is indicated for use in general soft tissue approximation and/or 1. ligation, including use in cardiovascular, ophthalmic and neurological procedures.
- 2. This device may not be manufactured from any material other than a long chain polyolefin polymer known as polypropylene. In addition, you must maintain documentation at your premises regarding vendor certification for raw or semiprocessed source material, all manufacturing and quality control release procedures, and validation of sterilization procedures used in the manufacture of the Polypropylene surgical suture. Any deviation of the source material or processing as described in this 510(k) notification requires submission of a new premarket notification and Food and Drug Administration (FDA) clearance prior to commercial distribution of the modified device.

The sale, distribution and use of this device are restricted to prescription use in accordance with 21 CFR 801.109.

{4}------------------------------------------------

Page 2 - Mr. Main M. Ghazal

The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practices, labeling, and prohibition against misbranding and adulteration.

Existing major regulations affecting your device can be found in the Code of Federal Regulations (CFR), Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practices (GMP) for Medical Devices: General GMP regulation (21 CFR Part 820) and that, through periodic GMP inspections, The Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control Provisions, or other Federal laws or regulations.

This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.

If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at [phone]. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at [phone]. Also, please note the regulation entitled. "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number [phone] or 301-443-6597, or at its internet address http://www.fda.gov/cdrh/dsmamain.html.

Sincerely vours.

Nel R.P. Ogden
James E. Dillard III

James E. Dillard III Acting Director Division of General and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health

{5}------------------------------------------------

K99 3997

T.CAD International 990929/MG-510(K) POLYPROPYLENE

## SECTION II

# Statement of indication for use

Device Name: POLYPROPYLENE

510(k) Number:

Indication for use:

POLYPROPYLENE is indicated for use in general soft tissue approximation and/or ligation, including use in cardiovascular, ophthalmic and neurological procedures.

(PLEASE DO NOT WRITE BELOW THE LINE -- CONTINUE ON ANOTHER PAGE IF NECESSARY)

### Concurrence of CDRH, Office of Device Evaluation (ODE)

Prescription Use
(Per 21 CFR 801.109)

Over-the-Counter Use _ OR

NRO IJD

(Division Sign-Off) Division of General Restorative Devices K993997 510(k) Number _