A patient Examination Glove is a disposable device intended for medical purpose that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.
Device Story
Powder-free latex examination glove; polymer coated; intended for medical use to prevent cross-contamination between patient and examiner. Device worn on hand or finger by healthcare personnel in clinical settings. Provides barrier protection; reduces protein content to 50 micrograms or less. Disposable; non-sterile.
Clinical Evidence
No clinical data provided; bench testing only.
Technological Characteristics
Latex material; polymer coated; powder-free; protein content labeled at 50 micrograms or less. Class I device; Product Code LYY.
Indications for Use
Indicated for use as a disposable medical glove worn on the examiner's hand or finger to prevent cross-contamination between patient and examiner.
Regulatory Classification
Identification
A non-powdered patient examination glove is a disposable device intended for medical purposes that is worn on the examiner's hand or finger to prevent contamination between patient and examiner. A non-powdered patient examination glove does not incorporate powder for purposes other than manufacturing. The final finished glove includes only residual powder from manufacturing.
Related Devices
K993500 — POWDERFREE LATEX EXAMINATION GLOVES (POLYMER COATED) (PROTEIN LABEL OF 50 MCROGRAM OR LESS) · Besglove Medicare Sdn. Bhd. · Dec 2, 1999
K040448 — GENTLE SKIN AND (MULTIPLE LABELS) LATEX EXAMINATION GLOVE, POWDER FREE, POLYMER COATED WITH PROTEIN CLAIM · Rosner-Mautby Meditrade(Thailand) , Ltd. · Mar 23, 2004
K093375 — KS-CARE POWDER FREE POLYMER COATED LATEX EXAMINATION GLOVE WITH PROTEIN CONTENT LABELING CLAIM (50UG OR LESS) · Koon Seng Sdn Bhd · Dec 2, 2009
K161006 — Latex Powder Free Polymer Coated Examination Glove with Protein Labeling Claim of 50 Microgram or Less Per Gram of Glove · Hartalega Sdn Bhd · Aug 4, 2016
K993529 — POWDER FREE LATEX EXAMINATION GLOVES, POLYMER COATED WITH PROTEIN CONTENT LABELING CLAIM (50 MICROGRAMS OR LESS) · Biografik (Malaysia) Sdn Bhd · Dec 29, 1999
Submission Summary (Full Text)
{0}------------------------------------------------
Image /page/0/Picture/1 description: The image is a black and white logo for the U.S. Department of Health & Human Services. The logo features the department's name in a circular arrangement around a central emblem. The emblem consists of three stylized, curved lines that resemble a human figure, possibly representing health and well-being.
Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850
DEC - 3 1999
Mr. Lim Lee Aik Manaqinq Director SRI Johani Sdn. Bhd. Lot PT 7178 Balakong N/V 43300 Seri Kembangan Selangor Darul Ehsan, Malaysia
K993454 Re : Powderfree Latex Examination Gloves (Polymer Trade Name: Coated) (Protein Label Claim - 50 micrograms or less) Requlatory Class: I Product Code: LYY Dated: October 8, 1999 Received: October 13, 1999
Dear Mr. Aik:
We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions The general controls provisions of the Act of the Act. include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration.
If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practice for Medical Devices: General (GMP) requlation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in
{1}------------------------------------------------
Page 2 - Mr. Aik
the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or requlations.
This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market.
If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4692. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference for transmitted information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html".
Sincerely yours,
Susan Runner
Timothy A. Ulatowski Director Division of Dental, Infection Control and General Hospital Devices Office of Device Evaluation Center for Devices and Radiological Health
Enclosure
{2}------------------------------------------------
Attachment 9
510 (K) number (if known): K993454
Device Name : Powderfree Latex Examination Gloves (Polymer Coated) (Protein Label Claim) 50
Indications For Use :
A patient Examination Glove is a disposable device intended for medical purpose that is worn on the examiner's hand or finger to prevent contamination between patient and examiner.
## (PILEASE DO NOT WRITE BELOW THIS LINE. CONTINUE ON ANOTHER PAGE IF NEEDED)
Concurrence of CDRH, Office of Device Evaluation (ODE)
Qiu S. Lin
(Division Sign Off Division of Dental, Infection Control and General Hospital Dev 510(K) Number
| Prescription Use | |
|----------------------|--|
| (Per 21 CFR 801.109) | |
OR Over-The-Counter Use X
Panel 1
/
Sort by
Ready
Predicate graph will load when search results are available.
Embedding visualization will load when search results are available.
PDF viewer will load when search results are available.
Loading panels...
Select an item from Submissions
Click any panel, subpart, regulation, product code, or device to see details here.
Section Matches
Results will appear here.
Product Code Matches
Results will appear here.
Special Control Matches
Results will appear here.
Loading collections...
Loading
My Alerts
You will receive email notifications based on the filters and frequency you set for each alert.