← Product Code MGQ · K992074 # MPM REGENECARE WOUND GEL (K992074) _Mpm Medical., Inc. · MGQ · Dec 23, 1999 · SU · SESE_ **Canonical URL:** https://fda.innolitics.com/device/K992074 ## Device Facts - **Applicant:** Mpm Medical., Inc. - **Product Code:** MGQ - **Decision Date:** Dec 23, 1999 - **Decision:** SESE - **Submission Type:** Traditional - **Device Class:** Class U - **Review Panel:** SU - **Attributes:** Therapeutic ## Intended Use Local management of skin wounds, including pressure ulcers, venous stasis ulcers, first and second degree burns, and superficial wounds and scrapes. ## Device Story MPM Regenecare™ Wound Gel is a viscous hydrogel dressing for local management of skin wounds. Supplied sterile in 3 oz. plastic tubes. Applied topically to wounds to provide a moist healing environment. Biocompatibility established via dermal irritation, sensitization, and cytotoxicity testing. ## Clinical Evidence Bench testing only. Biocompatibility established through primary dermal irritation test in rabbits, sensitization test in guinea pigs, and in vitro cytotoxicity test. ## Technological Characteristics Viscous hydrogel wound dressing. Supplied sterile in 3 oz. plastic tubes. Biocompatible materials. ## Predicate Devices - MPM Hydrogel™ Dressing ([K952276](/device/K952276.md)) ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ DEC 2 3 1999 ### K992074 ## 510 (k) SUMMARY #### 1. ADMINISTRATIVE MPM Medical, Inc. Submitter: P.O. Box 151335 Arlington, Texas 76015 Contact Person: Paul Miller Date of Preparation: October 18, 1999 #### DEVICE NAME ll. Proprietary Name: MPM Regenecare™ Wound Gel Common Name: Wound Dressing Classification Name: Hydrogel wound and burn dressing #### 111. PREDICATE DEVICE MPM Hydrogel™ Dressing (MPM Medical, Inc.; K952276) ### IV. DEVICE DESCRIPTION MPM Regenecare™ Wound Gel is a viscous hydrogel wound dressing intended for use in the local management of skin wounds. The product is supplied sterile in 3 oz. plastic tubes. Biocompatibility of the device has been established by a primary dermal irritation test in rabbits, a sensitization test in guinea pigs, and an in vitro cytotoxicity test. #### V. INTENDED USE Local management of skin wounds, including pressure ulcers, venous stasis ulcers, first and second degree burns, and superficial wounds and scrapes. {1}------------------------------------------------ Image /page/1/Picture/1 description: The image shows the logo for the Department of Health & Human Services - USA. The logo is circular, with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" arranged around the perimeter of the circle. Inside the circle is a stylized image of an eagle or bird, with its wings spread and head facing to the left. The logo is black and white. DEC 2 3 1999 Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 MPM Medical, Inc. c/o Mr. Richard A. Hamer Richard Hamer Associates, Inc. 6401 Meadows West Drive Ft. Worth, Texas 76132 Re: K992074 Trade Name: MPM Regenecare Wound Gel Regulatory Class: Unclassified Product Code: MGO Dated: November 30, 1999 Received: December 7, 1999 Dear Mr. Hamer: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the current Good Manufacturing Practice requirement, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic (QS) inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. {2}------------------------------------------------ Page 2 - Mr. Richard A. Hamer If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4595. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597 or at its internet address "http://www.fda.gov/cdrh/dsmamain.html". Sincerely yours, Neil R.P. Ogden James E. Dillard Acting Director Division of General and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ K99 2074 of Page 1 | 510(k) Number (if known): | K992074 | |---------------------------|---------| |---------------------------|---------| Device Name: MPM Regenecare™ Wound Gel # Indications for Use: Local management of skin wounds, including pressure ulcers, venous stasis ulcers, first and second degree burns, and superficial wounds and scrapes. (PLEASE DO NOT WRITE BELOW THIS LINE-CONTINUE ON ANOTHER PAGE IF NEEDED) | | Concurrence of CDRH, Office of Device Evaluation (ODE) | |-----------------------------------------|--------------------------------------------------------| | | NRO for JZD | | (Division Sign-Off) | | | Division of General Restorative Devices | | | 510(k) Number | K 992074 | | Prescription Use (Per 21 CFR 801.109) |
X
| OR | Over-the-Counter Use | |---------------------------------------|-----------------------------------------|----|--------------------------| | | | | (Optional Format 1-2-96) | Premarket Notification: MPM REGENECARE WOUND GEL --- **Source:** [https://fda.innolitics.com/device/K992074](https://fda.innolitics.com/device/K992074) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com