REDI-TEST METHAMPHETAMINE

K991504 · Redwood Biotech, Inc. · LAF · Jul 22, 1999 · Clinical Toxicology

Device Facts

Record IDK991504
Device NameREDI-TEST METHAMPHETAMINE
ApplicantRedwood Biotech, Inc.
Product CodeLAF · Clinical Toxicology
Decision DateJul 22, 1999
DecisionSESE
Submission TypeTraditional
Regulation21 CFR 862.3610
Device ClassClass 2

Intended Use

The Redi-Test Methamphetamine is a qualitative, one step immunochromatographic competitive assay used to screen human urine for the presence of d, methamphetamine at a cutoff concentration of 1000ng/mL. The test is qualitative and provides only a preliminary analytical result, which must be confirmed by an alternate methodology preferably, GC/MS.

Device Story

Redi-Test Methamphetamine is a one-step immunochromatographic competitive assay; utilizes specific antibodies to detect d-methamphetamine in human urine samples. Device provides qualitative preliminary results; requires confirmation by alternate methodology (e.g., GC/MS). Used as a screening tool; intended for professional or clinical use. Output is visual/qualitative; assists healthcare providers in identifying potential methamphetamine presence; necessitates follow-up confirmatory testing for clinical decision-making.

Clinical Evidence

Clinical performance evaluated by comparing Redi-Test Methamphetamine against DRI Amphetamine Enzyme Immunoassay using 102 urine specimens (45 negative, 57 positive). Results demonstrated 94% overall agreement. Discrepant samples were analyzed via GC/MS to confirm methamphetamine levels.

Technological Characteristics

Immunochromatographic competitive assay; utilizes specific antibodies for analyte detection. Qualitative, one-step test format. No electronic components, software, or external energy sources required.

Indications for Use

Indicated for the qualitative screening of human urine for the presence of d-methamphetamine at a 1000ng/mL cutoff concentration. Intended for preliminary analytical results requiring confirmation by alternate methods such as GC/MS.

Regulatory Classification

Identification

A methamphetamine test system is a device intended to measure methamphetamine, a central nervous system stimulating drug, in serum, plasma, and urine. Measurements obtained by this device are used in the diagnosis and treatment of methamphetamine use or overdose.

Special Controls

*Classification.* Class II (special controls). A methamphetamine test system is not exempt if it is intended for any use other than employment or insurance testing or is intended for Federal drug testing programs. The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in § 862.9, provided the test system is intended for employment and insurance testing and includes a statement in the labeling that the device is intended solely for use in employment and insurance testing, and does not include devices intended for Federal drug testing programs (*e.g.,* programs run by the Substance Abuse and Mental Health Services Administration (SAMHSA), the Department of Transportation (DOT), and the U.S. military).

Predicate Devices

Related Devices

Submission Summary (Full Text)

{0}------------------------------------------------ JUL 22 1999 K991504 ## 510(k) Summary I his summary of 510(k) safety and effectiveness information is being submitted in accordance with the requirements of the SMDA 1990 and 21 CFR Part 807.92. The assigned 510(k) number Is: 991504 1. Date of summary. July 1, 1999 Redwood Biotech 3573 2. Submitted by: Westwind Blvd. Santa Rosa, CA 95403 TEL 707-577-7959 FAX 707-577-0365 Contact: Robert Mount Redi-Test Methamphetamine 3. Device Name: 4. Device Classification: Class 11, 862.3610, Panel 91 Toxicology 5. Device description: The Redi-Test Methamphelamine is an immunochromatographic based one step in vitro lest. 6. Intended Use: The Redi-Test Methamphetamine Is a qualitative, one step immunochromatographic competitive assay used to screen human urine for the presence of d. melliamphetamine at a cutoff ooncontration of 1000ng/ml The test is qualitative and provides only a proliminary analytical result, which must be confirmed by an alternate methodology preferanty. GC/MS. 7. Substantial Equivalence: The Redi Test Methamphetamine was found substantially equivalent to the DRI. Amphetamine Enzyme Immunoassay. Both products are immunoassays and use spectic antibodies. The DRI Amphetamine assay detects amphetamine and methamine while the Rodi-Test Mothamphetamine detects methamphetamine. Both assays are proliminary screens and require confirmation will alternate methods such as GC/MS. The cut off sensitivity of both tests is 1000ng/ml. The tests demonstrated 94% agreement when 102 specimens (45 negative and 57 positive) were compared. Five of the six discrepant samples were positive by the DRI Amphetamine EIA, negative by the Redi-Test Methamphetamine and between 300 and 800ng/mL methamphetamine by GC/MS. One sample was negative by the DRI EIA and positive by the Redl-Test this sample had a GC/MS methamphetamine level of 1100ng/mL. Conclusion: The DRI Amphetamine Enzyme Immungassay and the Redi-Test Mcthamphetamine are substantially equivalent in performance characteristics. The correlation between the two tests was 94%. {1}------------------------------------------------ Image /page/1/Picture/1 description: The image shows the logo for the U.S. Department of Health & Human Services. The logo consists of a circular seal with the text "DEPARTMENT OF HEALTH & HUMAN SERVICES - USA" around the perimeter. Inside the circle is a stylized image of an eagle with three curved lines representing its wings. JUL 2 2 1999 Food and Drug Administration 2098 Gaither Road Rockville MD 20850 Redwood Biotech Inc. Ms. Janis Freestone c/o Advantage Diagnostics Corp. 2440 Leghorn Street Mountain View, California 94043 Re: K991504 > Trade Name: Redi-Test Methamphetamine Regulatory Class: II Product Code: LAF Dated: June 21, 1999 Received: June 30, 1999 Dear Ms. Freestone: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to legally marketed predicate devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments, or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (Act). You may, therefore, market the device, subject to the general controls provisions of the Act. The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practice, labeling, and prohibitions against misbranding and adulteration. If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval), it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations, Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Current Good Manufacturing Practice requirements, as set forth in the Quality System Regulation (QS) for Medical Devices: General regulation (21 CFR Part 820) and that, through periodic QS inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. {2}------------------------------------------------ ## Page 2 Under the Clinical Laboratory Improvement Amendments of 1988 (CLIA-88), this device may require a CLIA complexity categorization. To determine if it does, you should contact the Centers for Disease Control and Prevention (CDC) at (770) 488-7655. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4588. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification"(21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or (301) 443-6597, or at its internet address "http://www.fda.gov/cdrh/dsma/dsmamain.html". Sincerely yours, Steven Toutman Steven I. Gutman, M.D. M.B.A. Director Division of Clinical Laboratory Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {3}------------------------------------------------ 510k Number: Device Name: Redi-Test Methamphetamine Indications for Use: The Redi-Test Methamphetamine is a qualitative, one step immunochromatographic competitive assay used to screen human urine for the presence of d, methamphetamine at a cutoff concentration of 1000ng/mL. The test is qualitative and provides only a preliminary analytical result, which must be confirmed by an alternate methodology preferably, GC/MS. Sean Cooper (Division Sign-Off) Division of Clinical Laboratory Devices 504 510(k) Number ... Concurrence of CDRH, Office of Device Evaluation (ODE) Prescription Use (Per 21 CFR 801.109) OR Over the counter use
Innolitics

Panel 1

/
Sort by
Ready

Predicate graph will load when search results are available.

Embedding visualization will load when search results are available.

PDF viewer will load when search results are available.

Loading panels...

Select an item from Submissions

Click any panel, subpart, regulation, product code, or device to see details here.

Section Matches

Results will appear here.

Product Code Matches

Results will appear here.

Special Control Matches

Results will appear here.

Loading collections...