← Product Code MGQ · K984082 # BURN-AID HYDROGEL, BURN-AID BURN DRESSING, BURN-AID BURN BLANKET (K984082) _Emox 911 CC · MGQ · Jan 28, 1999 · SU · SESE_ **Canonical URL:** https://fda.innolitics.com/device/K984082 ## Device Facts - **Applicant:** Emox 911 CC - **Product Code:** MGQ - **Decision Date:** Jan 28, 1999 - **Decision:** SESE - **Submission Type:** Traditional - **Device Class:** Class U - **Review Panel:** SU - **Attributes:** Therapeutic ## Intended Use The BURN-AID Hydrogel, Burn Dressing and Burn Blanket are indicated for single use as a pre-medical first aid for first and second degree burns and scalds to cool, soothe and moisturize the burn area. ## Device Story Burn-aid products (Hydrogel, Dressing, Blanket) function as topical first aid for first and second degree burns/scalds. Device cools, soothes, and moisturizes burn sites. Intended for over-the-counter use. Not indicated for third degree burns, wound healing acceleration, long-term dressing, or as artificial skin. ## Clinical Evidence No clinical data provided; bench testing only. ## Technological Characteristics Hydrogel-based topical dressing/blanket. Single-use. Non-sterile/sterile status not specified. No electronic components or software. ## Submission Summary (Full Text) > This content was OCRed from public FDA records by [Innolitics](https://innolitics.com). If you use, quote, summarize, crawl, or train on this content, cite Innolitics at https://innolitics.com. > > Innolitics is a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices, including [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/). {0}------------------------------------------------ ## DEPARTMENT OF HEALTH & HUMAN SERVICES Public Health Service JAN 28 1999 Food and Drug Administration 9200 Corporate Boulevard Rockville MD 20850 Mr. Ivor Duncan EmOx 911 CC Post Office Box 79 Somerset West, South Africa 7129 Re: K984082 Trade Name: Burn-aid Hydrogel, Burn-aid Dressing, Burn-aid Burn Blanket Regulatory Class: Unclassifed Product Code: MGQ Dated: November 11, 1998 Received: November 16, 1998 Dear Mr. Duncan: We have reviewed your Section 510(k) notification of intent to market the device referenced above and we have determined the device is substantially equivalent (for the indications for use stated in the enclosure) to devices marketed in interstate commerce prior to May 28, 1976, the enactment date of the Medical Device Amendments or to devices that have been reclassified in accordance with the provisions of the Federal Food, Drug, and Cosmetic Act (the Act). You may, therefore, market your device subject to the general controls provisions of the Federal Food, Drug, and Cosmetic Act (Act) and the following limitations: - This device may not be labeled for use on third degree burns. 1. - This device may not be labeled as having any accelerating effect on the rate of 2. wound healing or epithelization. - 3. This device may not be labeled as a long-term, permanent, or no-change dressing, or as an artificial (synthetic) skin. - This device may not be labeled as a treatment or a cure for any type of wound. 4. The labeling claims listed above would be considered a major modification in the intended use of the device and would require a premarket notification submission (21 CFR 807.81). The general controls provisions of the Act include requirements for annual registration, listing of devices, good manufacturing practices, labeling, and prohibitions against misbranding and adulteration. {1}------------------------------------------------ Page 2 - Mr. Ivor Duncan If your device is classified (see above) into either class II (Special Controls) or class III (Premarket Approval) it may be subject to such additional controls. Existing major regulations affecting your device can be found in the Code of Federal Regulations (CFR), Title 21, Parts 800 to 895. A substantially equivalent determination assumes compliance with the Good Manufacturing Practices (GMP) for Medical Devices: General GMP regulation (21 CFR Part 820) and that, through periodic GMP inspections, the Food and Drug Administration (FDA) will verify such assumptions. Failure to comply with the GMP regulation may result in regulatory action. In addition, FDA may publish further announcements concerning your device in the Federal Register. Please note: this response to your premarket notification submission does not affect any obligation you might have under sections 531 through 542 of the Act for devices under the Electronic Product Radiation Control provisions, or other Federal laws or regulations. This letter will allow you to begin marketing your device as described in your 510(k) premarket notification. The FDA finding of substantial equivalence of your device to a legally marketed predicate device results in a classification for your device and thus, permits your device to proceed to the market. If you desire specific advice for your device on our labeling regulation (21 CFR Part 801 and additionally 809.10 for in vitro diagnostic devices), please contact the Office of Compliance at (301) 594-4595. Additionally, for questions on the promotion and advertising of your device, please contact the Office of Compliance at (301) 594-4639. Also, please note the regulation entitled, "Misbranding by reference to premarket notification" (21 CFR 807.97). Other general information on your responsibilities under the Act may be obtained from the Division of Small Manufacturers Assistance at its toll-free number (800) 638-2041 or 301-443-6597 or at its internet address http://www.fda.gov/cdrh/dsmamain.html. Sincerely yours, Celia M. Witten, Ph.D., M.D. Director Division of General and Restorative Devices Office of Device Evaluation Center for Devices and Radiological Health Enclosure {2}------------------------------------------------ INOR DUNCAN 510(k) Number (if known): 984082 Device Name: BURN-AID Hydrogel BURN-AID Burn Dressing BURN-AID Burn Blanket Indications for use: The BURN-AID Hydrogel, Burn Dressing and Burn Blanket are indicated for single use as a pre-medical first aid for first and second degree burns and scalds to cool, soothe and moisturize the burn area. ## (PLEASE DO NOT WRITE BELOW THIS LINE – CONTINUE: ON ANOTHER PAGE IF NEEDED) Concurrence of CDRH, Office of Device Evaluation (ODE) | | (Division Sign-Off) | |---------------------|---------------------------------------------------------| | Prescription use | Division of General Restorative Devices the counter Use | | (Per 21 CFR 801.109 | 510(k) Number: 984082 | --- **Source:** [https://fda.innolitics.com/device/K984082](https://fda.innolitics.com/device/K984082) **Published by [Innolitics](https://innolitics.com)** — a medical-device software consultancy. We help companies design, build, and clear FDA-regulated software and AI/ML devices. If you're preparing [a 510(k)](https://innolitics.com/services/510ks/), [a De Novo](https://innolitics.com/services/regulatory/), [a SaMD](https://innolitics.com/services/end-to-end-samd/), [an AI/ML medical device](https://innolitics.com/services/medical-imaging-ai-development/), or [an FDA regulatory strategy](https://innolitics.com/services/regulatory/), [get in touch](https://innolitics.com/contact). **Cite:** Innolitics at https://innolitics.com